Skip to main content
U.S. flag
Back to results
 

Summary

This position is located at US Mint,Manufacturing Directorate - Philadelphia - Die Manufacturing Division. As a Die Finishing Specialist, you will be setting up, operating, and maintaining a number of automated machine tools to auto-polish dies in the production of proof coins.

Overview

Help
Accepting applications
Open & closing dates
02/18/2026 to 03/03/2026
Salary
$31.79 to - $37.14 per hour
Pay scale & grade
WG 10
Location
Philadelphia, PA
1 vacancy
Remote job
No
Telework eligible
No
Travel Required
Not required
Relocation expenses reimbursed
No
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
10
Supervisory status
No
Security clearance
Not Required
Drug test
No
Financial disclosure
No
Bargaining unit status
Yes
Announcement number
26-MINT-12887736-P
Control number
858006600

Duties

Help

As a Die Finishing Specialist, you will:

  • Operate and maintain a number of automated machine tools to auto-polish dies in the production of proof coins.
  • Perform laser frosting operations and coating operations using the Particle Vapor Deposition (PVD) process.
  • Perform automated and manual die finishing work for the production of proof coins.

Requirements

Help

Conditions of employment

  • All employees must wear face masks while on MINT property when required by CDC and Federal guidelines.
  • All newly appointed employees to the competitive (or excepted) service are subject to a probationary (or trial) period. During this time, your performance, conduct, and suitability for continued employment will be evaluated. You will not automatically convert to permanent status at the end of the probationary (or trial) period. Your supervisor must affirmatively determine that continued employment is in the best interest of the Federal service. If no certification is made before the probationary (or trial) period ends, your appointment will be terminated. You are encouraged to actively engage with your supervisor, seek feedback, and understand role expectations. Additional guidance and support will be provided during onboarding.
  • Must successfully complete a background investigation.
  • Complete a Declaration for Federal Employment to determine your suitability for Federal employment, at the time requested by the agency.
  • Have your salary sent to a financial institution of your choice by Direct Deposit/Electronic Funds Transfer.
  • If you are a male applicant born after December 31, 1959, certify that you have registered with the Selective Service System or are exempt from having to do so.
  • Go through a Personal Identity Verification (PIV) process that requires two forms of identification from the Form I-9. Federal law requires verification of the identity and employment eligibility of all new hires in the U.S.
  • Shift Work: This facility operates on a 24 hour per day, three-shift basis. Assignment to a specific shift cannot be guaranteed. The successful applicant must be able to work all shifts on a rotational basis.
  • May be required to wear safety clothing and/or equipment required by the position. This may include safety shoes, hard hats, hearing protection, gloves, masks, etc.
  • Pass a pre-employment physical examination.

Qualifications

You must meet the following requirements by the closing date of this announcement.

The experience may have been gained in either the public, private sector or volunteer service.

You must meet the screen-out element Ability To Do The Work Of The Position Without More Than Normal Supervision, normally addressed at the beginning of the online questions. To meet the screen-out element, applicants must have: completed training or formal education in performing these tasks but have not yet performed them on the job . In addition, you must also obtain an average score of two (2) for the following elements for this position as addressed through the online question in order to be considered minimally qualified. Your application will be evaluated in the following areas: (screen-out) Ability To Do The Work Of The Position Without More Than Normal Supervision, Knowledge of Metals, Operation of Machine Tools, Technical Practices (theoretical, precise, artistic), Ability To Use Hand Tools for Machine Shop.

This opportunity is also open to Status Candidates under Announcement 26-MINT-12887735. Please refer to that announcement for details on open period, eligibility, and how to apply.

Physical Requirements
Sits occasionally (up to 30% of the time)Stands frequently (up to 70% of the time)Walks frequently (up to 70% of the time)Lifts up to 10 lbs. from floor to knuckle height seldom (up to 10% of the time)Lifts up to 10 lbs. between knuckle and chest level frequently (up to 70% of the time)Lifts up to 20 lbs. from floor to knuckle height seldom (up to 10% of the time)Lifts up to 20 lbs. between knuckle and chest level frequently (up to 70% of the time)Lifts up to 30 lbs. from floor to knuckle height seldom (up to 10% of the time)Lifts up to 30 lbs. between knuckle and chest level frequently (up to 70% of the time)Lifts up to 40 lbs. between knuckle and chest level frequently (up to 70% of the time)Carries unilateral occasionally (up to 30% of the time)Carries bilateral frequently (up to 70% of the time)Pushes pulls up to 51bs of force frequently (up to 70% of the time)Pushes pulls up to 10 lbs. of force seldom (up to 10% of the time)Pushes pulls greater than 10 lbs. of force seldom (up to 1 0% of the time)Climbs stairs occasionally (up to 30% of the time)Bends at waist seldom (up to 10% of the time)Twists at waist occasionally (up to 30% of the time)Crouches squats seldom (up to 10% of the time)Reaches knees to shoulders occasionally (up to 30% of the time)Reaches above shoulders seldom (up to 10% of the time)Repetitive hand motion occurs seldom (up to 10% of the time)Pinch grasps seldom (up to 10% of the time)Fine finger manipulation occurs seldom (up to 10% of the time)Ability to hear required seldom (up to 10% of the time)Ability to see required constantly (greater than 70% of the time)
AND
You must show in your experience in the online application that you possess the knowledge, skill and abilities to perform the duties of the position.

Key Requirements:
  1. Please refer to "Conditions of Employment."
  2. Click "Print Preview" to review the entire announcement before applying.
  3. Must be U.S. Citizen or U.S. National

Education

This job does not have an education qualification requirement.

Additional information

OTHER INFORMATION:

  • We may select from this announcement or any other source to fill one or more vacancies.
  • This is a bargaining unit position.
  • This is a bargaining unit position and is represented by the AFGE, Local 1023.
  • We offer opportunities for flexible work schedules.
  • This position requires that the successful candidate undergo personnel vetting, which includes a background investigation and enrollment upon onboarding into "Continuous Vetting." Enrollment in Continuous Vetting will result in automated record checks being conducted throughout one's employment with Treasury. The successful candidate will also be enrolled into FBI's Rap Back service, which will allow Treasury to receive notification from the FBI of criminal matters (e.g., arrests, charges, convictions) involving enrolled individuals in near real-time. For more information about individual rights, Noncriminal Justice Applicant's Privacy Rights - FBI, FD-258 Privacy Act Statement - FBI, and SEAD-3-Reporting-U.pdf (dni.gov).

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Your application includes your résumé, responses to the online questions, and required supporting documents. Please be sure that your résumé includes detailed information to support your qualifications for this position; failure to provide sufficient evidence in your résumé may result in a "not qualified" determination.

Rating: Your application will be evaluated in the following areas: (screen-out) Ability To Do The Work Of The Position Without More Than Normal Supervision, Knowledge of Metals, Operation of Machine Tools, Technical Practices (theoretical, precise, artistic), Ability To Use Hand Tools for Machine Shop.

Category rating will be used to rank and select eligible candidates. If qualified, you will be assigned to one of three quality level categories, superior (highest quality category), good (middle quality category), and acceptable (minimally qualified category), depending on your responses to the online questions, regarding your experience, education, and training related to this position. A subject matter expert may be used in the evaluation. Your rating may be lowered if your responses to the online questions are not supported by the education and/or experience described in your application.

Veterans' preference is applied after applicants are assessed. Preference-eligibles will be listed at the top of their assigned category and considered before non-preference-eligibles in that category.Qualified preference-eligibles with a compensable service-connected disability of 10% or more will be listed at the top of the highest category.

Referral: If you are among the top qualified candidates, your application may be referred to a selecting official for consideration. You may be required to participate in a selection interview.

If you are a displaced or surplus Federal employee (eligible for the Career Transition Assistance Plan (CTAP)/Interagency Career Transition Assistance Plan (ICTAP)) you must be assigned the middle category or better to be rated as "well qualified" to receive special selection priority.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.