Clarification from the agency

This is a Certain Personnel of the Department of Defense Direct Hiring Authority notice open to the Public.

Videos

• Serves as the General Engineer (Energy and Resilience) responsible for developing, planning, and managing the administration of energy efficiency and resiliency projects and programs for Installation management, Columbus OH (SF-CIE).
• Develops local guidelines, procedures, and processes for implementing DLA Energy Resource Management (ERM) and resiliency policies, guidance, project submissions, and reporting requirements.
• Develops detailed plans, goals, and objectives for long-range implementation and administration of energy efficient facilities maintenance and management programs.
• Develops, plans, and implements energy cost avoidance projects that reduce the annual cost of energy and water usage. Tracks, analyzes and reports energy consumption data and costs of assigned location.
• Provides technical assistance and guidance to the Site Director, Environmental Division, other local site engineers, and facility maintenance support personnel in all areas of electrical or mechanical controls, design, and code compliance.
• Serves as a project manager, design and construction manager directly responsible for accomplishment of energy and related projects. Develops and compares alternative layouts, design, and plan drawings.
• Conducts field investigations and confers with construction contractors and the Contracting Officers Representatives (CORs) to resolve problems or latent conditions.

Conditions of employment

• Must be a U.S. citizen
• Tour of Duty: Flexible (https://www.dla.mil/Careers/Join-Our-Team/Benefits/#Work)
• Security Requirements: Non-Critical Sensitive with Secret Access
• Appointment is subject to the completion of a favorable suitability or fitness determination, where reciprocity cannot be applied; unfavorably adjudicated background checks will be grounds for removal.
• Fair Labor Standards Act (FLSA): Exempt
• Selective Service Requirement: Males born after 12-31-59 must be registered or exempt from Selective Service.
• Recruitment Incentives: Not Authorized
• Bargaining Unit Status: Yes
• Selectees are required to have a REAL ID or other acceptable identification documents to access certain federal facilities. See https://www.tsa.gov/real-id for more information.
• Recognition as an energy professional by possessing a Certified Energy Manager (CEM) accreditation or obtaining a CEM accreditation within 2 years of placement into position.

Qualifications

To qualify for a General Engineer your resume and supporting documentation must support:

A. Basic Requirement: A bachelor's degree or higher in professional engineering. To be acceptable, the program must: (1) be in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

A combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional Registration or Licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the Basic Requirements above. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in the Basic Requirements above.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g. engineering technology physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

B. Specialized Experience: One year of specialized experience that equipped you with the particular competencies to successfully perform the duties of the position and is directly in or related to this position. In addition to meeting the Basic Requirement above, to qualify for the GS-13 grade level, specialized experience must be at the GS-12 grade level or equivalent under other pay systems in the Federal service, military, or private sector. Applicants must meet eligibility requirements including minimum qualifications, and any other regulatory requirements by the cut-off/closing date of the announcement. Creditable specialized experience includes:

• Demonstrating knowledge of DOW, Department of Energy (DoE), and Federal Statutes related to Energy Resource Management (ERM), Energy Resilience and Conservation Investment Program (ERCIP), and Utility Privatization (UP) Programs.
• Inspecting contractor repairs, review plans to improve or redesign water and sewer distribution systems, and to provide or improve drainage systems.
• Understanding of related engineering fields such as mechanical and electrical, as well as knowledge of applicable environmental statutes, regulations, and federal resilience programs.
• Understanding all aspects of Energy Resilience (program policies, procedures, reporting requirements etc..).
• Demonstrating knowledge of fundamentals of building energy systems, alternative energy systems, building energy codes and applicable professional standards, energy accounting and analysis, life-cycle cost methodology, fuel supply, and pricing and instrumentation for energy surveys and audits.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Direct Hire Evaluation: Once the application process is complete, a review of your application will be made to ensure you meet the job requirements. This vacancy will be filled through a Direct Hire Authority. All applicants who meet the basic qualification requirements will be forwarded to the Selecting Official for consideration. The rule of Three, Veteran's Preference and traditional rating and ranking of applicants do not apply to this vacancy. We will evaluate your application for basic eligibility and to determine if your experience meets the basic qualification requirements described in the announcement. All applicants who meet the qualifications and other basic requirement are eligible for referral and selection consideration. Please follow all instructions carefully. Errors or omissions may affect your rating.