Clarification from the agency

This position has a limited area of consideration to Command-wide (AETC).

- Responsible for organizing and coordinating an effective receiving operation.

- Responsible for organizing and coordinating an effective storage operation.

- Performs tasks involved in issuing and shipping items.

- Operates fork lift trucks and automated material handling and identification equipment to include mobile stock selectors and electromechanical automated equipment, such as high rise automated storage and retrieval vehicles to move, stack and unstack, load and unload, bin, and position material.

- Drives one or more types of trucks, such as pickup, panel, and flatbed trucks, which typically have a gross vehicle weight of 10,000 pounds or less, on public roads at highway speeds. Maintains records and documents actions. Performs material handling duties, including the use of tools and other equipment, in a safe manner, utilizing safety practices and procedures, and complying with established safety rules and regulations.

Conditions of employment

• This position has a limited area of consideration to Command-wide (AETC).
• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• This posn is subject to provisions of the DoD Priority Placement Program
• Disclosure of Political Appointments
• Direct Deposit: All federal employees are required to have direct deposit.
• May be required to work other than normal duty hours, which may include evenings, weekends, and/or holidays.
• Emergency overtime may be required.
• The work requires the employee to drive a motor vehicle. An appropriate, valid driver's license is required for the position.
• May train and/or guide other personnel in performance of material handling duties.
• This is a drug testing designated position. The incumbent is subject to random testing for drug use.

Qualifications

In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.

QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-6900, Warehousing and Stock Handling Group. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.

The screen out element for this position is the ability to do the work of the position without more than normal supervision.

JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:

1. Knowledge of accepted warehousing methods, procedures, and material handling techniques; warehousing functions, such as material receiving, storage, issuing, and preservation; and of warehouse configurations, storage requirements for particular commodities, and storage documentation requirements.
2. Knowledge of inventory procedures; regulations, procedures, and policies related to records maintenance and documentation; and of safety regulations, practices, and procedures.
3. Skill in the use of automated material processing equipment and systems to include computer terminals.
4. Ability to interpret and apply instructions pertaining to material handling; and to maintain tools, equipment, and work area in a neat, clean, and orderly manner.
5. Ability to prepare inventory and production reports; and to screen shipping and receiving documents for discrepancies.
6. Ability to safely operate fork lift trucks to handle controls for starting, stopping, backing, lifting, lowering, tilting, and driving fork lift trucks through narrow aisles, up and down ramps, and in and out of trucks; and to safely drive and operate a motor vehicle to manipulate controls for starting, stopping, backing, and driving vehicles in all types of traffic and road conditions and in judging overhead, side clearance, turning radius, and braking distance.

PHYSICAL EFFORT: Works on hard surfaces and in work areas that require standing, stooping, bending, and working in tiring and uncomfortable positions. May lift and carry weights up to 40 pounds. May handle heavier items with weight lifting equipment or with assistance from other workers. Work requires light to moderate physical effort in reaching, bending, turning, or moving hands, arms, feet, and legs to operate hand and foot controls while driving, raising, lowering, and tilting fork lift trucks. Subject to possible strain caused by vibration of fork lift trucks. Occasionally may be required to make limited emergency repairs on vehicles, such as changing a flat tire.

WORKING CONDITIONS: Work is done inside and outside in areas that may be hot, damp, cold, drafty, or poorly lighted. Employee is regularly exposed to the possibility of cuts, scrapes, bruises, falls from ladders, falling material, or injury from equipment. May be exposed to dust, dirt, grease, solvents, and high noise areas while working in a mechanized work area, or radiation, toxins, explosives hazards, or chemical fumes while working in a hazardous materials area. May be required to wear protective clothing such as hard hats, steel toed shoes, rubber gloves, masks, and rubber aprons. Drives motor vehicles in all types of traffic and weather conditions.

PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine your eligibility, qualifications, and quality ranking for this position. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

BASIS OF RATING: Your application will be rated under the Cut Point procedures based on the extent to which the quality, depth, and complexity of your experience relates to the qualification requirements. Additional points are not added for Veteran's Preference; however, Veteran's Preference is considered where applicable.

Best Qualified Group: Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements.
Fully Qualified Group: Candidates in this category possess good skills and experience above the minimum requirements.
Basically Qualified Group: Candidates in this category meet the minimum experience requirements.

The resume/documents you submit must support your responses to the online questionnaire. If your application contradicts or does not support your questionnaire responses, you will receive a rating of "not qualified" or "insufficient information" and you will not receive further consideration for this job.

Applicants who disqualify themselves will not be evaluated further.

APPRAISALS/AWARDS: Hiring Managers use objective methods and consider previous performance appraisals and awards in the selection process. Current Federal Civilian employees should list any relevant performance related rating and/or awards in your resume.