Skip to main content
U.S. flag
Back to results
 

SHEET METAL MECHANIC LEADER (AIRCRAFT)

Department of the Air Force
Air Force Materiel Command
570 AIRCRAFT MAINT SQ/MXDPB. May be used to fill like vacancies at Hill AFB, UT.

Summary

Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information.

The primary purpose of this position, SHEET METAL MECHANIC LEADER (AIRCRAFT), WL-2806-12, is to lead 3+ workers to accomplish trades and/or labor work on a substantially full time and continuing basis. Leader is responsible to both perform the work assigned by a supervisor and ensure that subordinates completed assigned work consistent with trades and labor standards.

Overview

Help
Accepting applications
Open & closing dates
12/22/2025 to 01/02/2026
Salary
$35.71 to - $41.68 per hour

Annually $74,527 - $86,986

Pay scale & grade
WL 11
Location
Few vacancies in the following location:
Hill AFB, UT
Remote job
No
Telework eligible
No
Travel Required
Occasional travel - May be required to travel by military or commercial aircraft in the performance of temporary duty assignments.
Relocation expenses reimbursed
No
Appointment type
Permanent
Work schedule
Multiple Schedules
Service
Competitive
Promotion potential
None
Job family (Series)
Supervisory status
No
Security clearance
Other
Drug test
Yes
Financial disclosure
No
Bargaining unit status
Yes
Announcement number
AFMC-12857735-068635-8L-BS
Control number
853105800

Duties

Help

  • On a regular and recurring basis, utilize trades and/or labor knowledge and skill to lead a team of three or more workers in performance of various related work.
  • Perform nonsupervisory trades and/or labor work that is usually of the same kind and level as members of the work crew led.
  • Periodically check Supply Materials and Equipment, ensuring needed supplies and equipment are available to accomplish work assignments along with managing the Tool Control Program.
  • Ensure that the crew abides by all rules, regulations, and policies established by higher authority relative to safety, security, fire prevention, training, and good housekeeping.
  • Plan and lay out work with a minimum of accompanying information, to fabricate, manufacture, assemble, and install unconventional, one-of-a-kind aircraft sheet metal items for a one-time project or in support of experimental or testing activities.
  • Modify aircraft frame segments, such as metal structural members and reinforcements.

Requirements

Help

Conditions of employment

  • U.S. Citizenship Required
  • Males must be registered for Selective Service, see www.sss.gov.
  • This position is subject to provisions of the DoD Priority Placement Program.
  • Disclosure of Political Appointments
  • Relocation costs or other incentives may be available and considered by the organization.
  • This position may require travel.
  • This position may require drug testing and the candidate may be subject to passing a drug test upon selection.
  • Selectee is expected to be granted with and/or maintain the appropriate security clearance required for the position.
  • Selectee may be required to serve a probationary or trial period.
  • Direct Deposit: All federal employees are required to have direct deposit.
  • A pre-employment physical examination will be required.
  • The work may require the incumbent to drive a motor vehicle. An appropriate. valid driver's license may be required for the position.
  • May be required to be certified for working with and/or removing hazardous materials.
  • May be required to work shifts or uncommon tours of duty. Subject to call back to meet emergency situations.

Qualifications

In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.

QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-3800 Metal Work Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.

The screen out element for this position is the Ability To Lead Or Supervise.

JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:

  1. Knowledge of Equipment, Structure, Materials, etc. (includes constructing repair, and forging)
  2. Ability to Interpret Instructions, Specifications, etc. (includes blueprint reading)
  3. Layout and Pattern Development (includes Geometric Projection and Triangulation)
  4. Ability to Use Hand Tools, Power Tools, etc., for Metal Work
  5. Dexterity (Assembly Disassembly Reassembly etc)

PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

PHYSICAL DEMANDS: Work encompasses strenuous physical exertion when bending and shaping the more complex items in handling larger and bulkier items. Physical exertion is moderate and includes prolonged standing; climbing up and down ladders and scaffolding; working in cramped and awkward positions while installing items; reaching, lifting, and bending while using hand and powered tools; and the heavy lifting and carrying of items over 25 pounds and with mechanical or human assistance.

WORK ENVIRONMENT: Works both inside and outside and is subjected to a moderate amount of noise and vibration from shop machines and to a variety of weather conditions. Subject to cuts, bruises, falls, and burns. Required to wear safety glasses when performing eye hazardous operations.

Education

This job does not have an education qualification requirement.

Additional information

Hill Air Force Base provides worldwide engineering and logistics management for the F-16 Fighting Falcon, A-10 Thunderbolt II, and the Minuteman III ICBM, and performs depot maintenance of the F-16, A-10, and C-130 Hercules aircraft. The base is located between Ogden and Salt Lake City. The area is known for year round activities, including skiing, hiking, boating, extreme sports, fishing and hunting, with four distinct seasons, low humidity and moderate snow fall in the valley.

Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here. To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.

Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information.

120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.

Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.

Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click here to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.

Direct Deposit: All federal employees are required to have direct deposit.

Disabled veteran leave is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click here.

If you have questions regarding this announcement and have hearing or speech difficulties click here.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine your eligibility, qualifications, and quality ranking for this position. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

The resume/documents you submit must support your responses to the online questionnaire. If your application contradicts or does not support your questionnaire responses, you will receive a rating of "not qualified" or "insufficient information" and you will not receive further consideration for this job.

Applicants who disqualify themselves will not be evaluated further.

APPRAISALS/AWARDS: Hiring Managers use objective methods and consider previous performance appraisals and awards in the selection process. Current Federal Civilian employees should list any relevant performance related rating and/or awards in your resume.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.