Skip to main content
U.S. flag
Back to results
 

COMPOSITE/PLASTIC FABRICATOR LEADER

Department of the Air Force
Air Force Materiel Command
530 COMMODITIES MAINT SQ/MXDPC. May be used to fill like vacancies at Hill AFB.

Summary

Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information.

The primary purpose of this position, COMPOSITE/PLASTIC FABRICATOR LEADER, WL-4352-10, is to lead three or more workers to accomplish trades and/or labor work on a substantially full time and continuing basis. Responsible to both perform the work assigned by a supervisor and ensures that subordinates completed assigned work consistent with trades and labor standards.

Overview

Help
Accepting applications
Open & closing dates
12/18/2025 to 12/24/2025
Salary
$70,332 to - $82,040 per year

Hourly: $33.70 - $39.31

Pay scale & grade
WL 10
Location
Few vacancies in the following location:
Hill AFB, UT
Remote job
No
Telework eligible
No
Travel Required
Occasional travel - May be required to travel by military or commercial aircraft in the performance of temporary duty assignments.
Relocation expenses reimbursed
No
Appointment type
Permanent
Work schedule
Multiple Schedules
Service
Competitive
Promotion potential
None
Supervisory status
No
Security clearance
Other
Drug test
No
Financial disclosure
No
Bargaining unit status
Yes
Announcement number
AFMC-12855463-037770-8L-AEB
Control number
852734500

Duties

Help

  • Lead a team of trades and/or labor workers.
  • Perform nonsupervisory trades and/or labor work that is usually of the same kind and level as members of the work crew led.
  • Perform Signature Assessments of Low Observable Coating for damage, integrity, and overall Low Observable System status for aircraft assigned to the depot.
  • Evaluate and perform aircraft composite repairs.

Requirements

Help

Conditions of employment

  • U.S. Citizenship Required
  • Males must be registered for Selective Service, see www.sss.gov
  • This position is subject to provisions of the DoD Priority Placement Program
  • Disclosure of Political Appointments
  • Relocation costs or other incentives may be available and considered by the organization.
  • This position may require travel. May be required to travel (TDY) any place, any time, and in any manner to support the unit's mission, 24 hours a day 7 days a week flight test operation.
  • This position may require drug testing and the candidate may be subject to passing a drug test upon selection.
  • Selectee is expected to be granted with and/or maintain the appropriate security clearance required for the position.
  • Selectee may be required to serve a probationary or trial period.
  • Direct Deposit: All federal employees are required to have direct deposit.
  • A pre-employment physical examination will be required.
  • Must be able to qualify for license/permit to operate required vehicles and aerospace ground equipment.
  • Must be able to pass a physical examination required to work around toxic chemicals and be able to wear the proper personal protective equipment.
  • May be required to work an uncommon tour of duty, scheduled and unscheduled overtime or rotating shifts.

Qualifications

In order to qualify, you must meet the experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.

QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-4300 Pliable Materials Work Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.

The screen out element for this position is: Ability to Lead or Supervise.

JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:

  1. Knowledge of Equipment Assembly, Installation, Repair etc.
  2. Technical Practices (theoretical, precise, artistic)
  3. Use of Measuring Instruments
  4. Ability To Interpret Instructions, Specification, etc. (includes blueprint reading)
  5. Ability To Use and Maintain Tools and Equipment
  6. Knowledge of Materials

PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

PHYSICAL DEMANDS: Frequently required to climb maintenance stands, and to the top surfaces of aircraft to perform operational and functional checks, troubleshoot discrepancies, and to make repairs. Employee is required to lift and carry parts and equipment weighing up to 25 pounds and over with assistance. May be required to work in strained, uncomfortable, or cramped positions for extended periods of time. Climbing and working at heights may also be required. Active walking, climbing, standing, stooping, stretching, bending.

WORK ENVIRONMENT: Incumbent's primary duties will be performed indoors or in climate-controlled environment but occasionally require work to be performed outside and/or in inclement weather. Work is performed both inside the hangar and on the flight line in all types of weather conditions. Hazards common to aircraft maintenance including excessive noise levels, jet exhaust, moving flight controls, explosive seat and canopy, high air pressures, and hazardous materials are present in work area. Many tasks assigned may expose employee to toxic fumes and dirty or dusty environments requiring the use of respirators and forced fresh air. Working from ladders and stands is also required.

Education

This job does not have an education qualification requirement.

Additional information

Hill Air Force Base provides worldwide engineering and logistics management for the F-16 Fighting Falcon, A-10 Thunderbolt II, and the Minuteman III ICBM, and performs depot maintenance of the F-16, A-10, and C-130 Hercules aircraft. The base is located between Ogden and Salt Lake City. The area is known for year round activities, including skiing, hiking, boating, extreme sports, fishing and hunting, with four distinct seasons, low humidity and moderate snow fall in the valley.

Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here. To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.

Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information.

120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.

Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.

Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click here to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.

Direct Deposit: All federal employees are required to have direct deposit.

Incentives: Recruitment and/or retention incentives may or may not be used.

Disabled veteran leave is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click here.

If you have questions regarding this announcement and have hearing or speech difficulties click here.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine your eligibility, qualifications, and quality ranking for this position. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

The resume/documents you submit must support your responses to the online questionnaire. If your application contradicts or does not support your questionnaire responses, you will receive a rating of "not qualified" or "insufficient information" and you will not receive further consideration for this job.

Applicants who disqualify themselves will not be evaluated further.

APPRAISALS/AWARDS: Hiring Managers use objective methods and consider previous performance appraisals and awards in the selection process. Current Federal Civilian employees should list any relevant performance related rating and/or awards in your resume.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.