Clarification from the agency

This position is open to current on-board Title 5 and Title 32 employees of the 185th ARW, Sioux City, Iowa Air National Guard.

As a SAFETY AND OCCUPATIONAL HEALTH MANAGER, GS-0018-9/11/12 your duties are below.

1. Plans, directs, coordinates, and evaluates activities necessary to the overall management of a safety program (and weapons/explosives safety) affecting a complex multi-mission installation and tenant command organizations. Reviews complex Safety and Occupational Health, weapons and explosives safety plans/programs and develops and issues instructions and procedures establishing technical and administrative weapons and explosives safety requirements which frequently become official installation policy and may impact a wide range of agency explosives activities.
2. Plans, directs, and conducts investigations and analyzes mishaps and hazardous conditions to determine origin, causes, and contributing elements and prepares written evaluation reports concerning findings. Weapons and explosives operations involve a substantial number and variety of hazards which include those with potential for significant severity and loss. Establishes in and participates on Safety Investigation Boards and investigates all occupational Safety mishaps and hazards to include the preparation and submittal of appropriate reports. Compiles and analyzes mishap data, identifies trends, and develops comprehensive recommendations to reduce or eliminate mishaps. Reports typically contain graphs, charts, and recommendations for changes in operating procedures, regulations, and use of protective devices that affect major agency activities.
3. Prepares supplements to instructions and manuals and develops specialized local instructions defining mishap prevention, weapons and explosives handling, use and storage procedures based on interpretation and/or adaptation of higher command instructions and policies formulated by other federal government agencies. Evaluates new trends for policy development or for further inquiry and study leading to new methods for eliminating or controlling serious hazards to life and property. Coordinates with other installation offices regarding comprehensive environmental, weapons and explosives safety matters affecting installation personnel and devises specialized operating practices involving recognized hazards. Prepares and revises local written procedures or abatement actions for conditions not directly addressed by existing standards or guidelines and evaluates agency-wide effect. .
4. Reviews and develops explosives site plans (utilizing manual and automated techniques) and specifications for new construction, major building alterations, and/or changes in installation equipment and monitors project through completion to ensure compliance with explosives safety standards and safety codes. Recommends design changes not included in the original plan and provides technical recommendations to eliminate or control explosives safety hazards in the construction, repair and maintenance of installation facilities and equipment. When need arises, stops any operation that is of imminent danger to personnel or property. Develops specialized operating practices affecting construction matters associated with recognized hazards and attends pre-construction conferences to brief contractors on explosives quantity-distance (QD) safety requirements. Identifies potential safety hazards to assure adequate life safety code compliance. Randomly spot checks construction sites and notifies contracting officer when explosives safety exposure distance violations or unsafe practices are observed. Consults with engineering and/or logistics personnel to provide up-to-date environmental and explosives safety criteria or standards on equipment to be purchased, architectural drawings, or planned operating procedures.
5. Develops and provides technical safety training/instruction to supervisors, employees, and /or unit explosives safety representatives on a wide range of work operations areas, such as risk assessment, transportation, handling, proper storage of hazardous materials, and evacuation procedures. Uses a wide variety of formal training materials, such as outlines, handouts, publications, films, exhibits, protective devices, and visual aids to provide and/or reinforce information related to safe work practices, accident prevention techniques, and mishap reporting requirements. Promotes safety through poster campaigns, displays of safety equipment, and oral presentations at local community and regional safety committee meetings. Extracts, compiles, and prepares safety articles, bulletins, and pamphlets for local use by base personnel. Maintains required course documentation/records.
6. Performs other duties as assigned. D2203P01

Conditions of employment

NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted position that requires military membership in a compatible military assignment in the Iowa Air National Guard. Selectee will be required to wear the military uniform. Acceptance of this excepted position constitutes concurrence with these requirements as a condition of employment.

APPLICATION MATERIALS MUST BE RECEIVED BY 12/30/2025 . FAILURE TO PROVIDE COMPLETE INFORMATION MAY RESULT IN YOUR NOT RECEIVING CONSIDERATION FOR THIS POSITION. Please refer to the Qualifications and Evaluations Section of this Announcement to understand the qualification requirements, and the How to Apply Section for detailed instruction on applying.

SECURITY CLEARANCE REQUIREMENT: Employment is subject to attaining and maintaining a clearance as required by this position. If the selectee does not possess the applicable security clearance when hired, application must be made within 30 days of the start date. Failure to make application for the required security clearance will result in termination of employment.

Failure to complete prescribed courses may be cause for reassignment or termination of FTS.

Military Rank Requirements: ENLISTED MEMBERS (E-7 and Below)

Qualifications

In describing your experience, please be clear and specific. We will not make assumptions regarding your experience. Applicants who do not fully address the minimum/specialized experience needed for the position in their resume will not be referred for consideration.

MINIMUM REQUIREMENTS: Performed, as a team member, specified survey work to identify and evaluate hazardous and nonhazardous work and conditions. Applied conventional survey techniques to complete relatively uncomplicated evaluations. Made recommendations concerning corrective procedures where the potential for injury or property damage exists or current procedures do not achieve the desired results or modify/cancel the corrective procedures are no longer appropriate for situations encountered.

SPECIALIZED EXPERIENCE REQUIREMENTS: GS-0018-9/11/12: Must haveexperience in the following:

GS-09 -

• 1 year equivalent to at least next lower grade level experience, education, or training performing periodic onsite surveys, to determine compliance with applicable occupational safety standards.
• Prepared or revised safety instructions and guides.
• Advised personnel of appropriate safety and occupational health measures to control or eliminate hazardous operating processes which may cause mishaps.
• Investigated mishaps, obtained statements from witnesses, and photographed mishap scenes.
• Recorded circumstances of mishaps and extent of injuries, prepared final report(s) of findings with recommendations to correct the unsafe acts or conditions which caused injuries or property damage.

GS-11 -

• 1 year equivalent to at least next lower grade level experience, education, or training performing periodic/unscheduled inspections of base facilities, warehouses, and equipment maintenance operations and evaluated compliance with applicable regulations and hazard system.
• Recommended measures and methods to correct safety and occupational health deficiencies.
• Participated in planning for testing of munitions, and assured integration of explosive safety criteria in testing procedures. Reviewed test implementation directives for inclusion of appropriate safety criteria.
• Prepared supplements to regulations and manuals for aircraft weapons safety and developed local regulations defining applicable mishap prevention procedures.

• 1 year equivalent to at least next lower grade level experience, education, or training performing industrial construction standards, methods, practices, techniques, materials, equipment, and utility systems sufficient to determine compliance with building safety standards and devise hazard control measures applicable to airport ground facilities and supporting industrial shops.
• Knowledge of psychological and physiological factors sufficient to develop a ground aviation safety education activity for supervisors and employees, to motivate maintenance personnel to apply safe working practices and to persuade supervisors to accept changes or modifications where required to achieve a safe working environment.
• Performed safety and occupational health principles, practices, procedures and standards applicable to a full range of complex safety and occupational health management responsibilities at a military aviation installation and requiring the planning, organizing, directing, operating and evaluation of a safety and occupational health program related to ground aviation, industrial and marine operations.
• Performed aviation maintenance work processes and support equipment, airport ground operations, facilities and runway maintenance techniques, and industrial work processes.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are found to be among the qualified candidates, you will be referred to the selecting official for employment consideration.

Knowledge, Skills and Abilities required for this position:

1. Comprehensive knowledge of the body of laws, regulations, policies, standards, procedures, methods, and techniques applicable to a broad range of Safety And Occupational Health, weapons and explosives safety requirements sufficient to plan, direct, coordinate, and evaluate a weapons and explosives safety program and advise key managerial personnel on courses of action affecting facility operations, weapons handling procedures, explosives operations, work processes, human-machine relationships, etc., which impact on the safety and efficiency of personnel.
2. Knowledge of the body of laws, regulations, policies, and procedures related to weapons and explosives safety to sufficiently interpret and modify or significantly depart from standard techniques in devising specialized operating practices concerned with accomplishing project weapons and explosives safety objectives; and explaining the reasons and purposes for applying measures and procedures, minimizing or abating hazards.
3. Knowledge of weapons and explosives safety principles, practices, standards, and abatement measures related to a variety of aviation and industrial settings sufficient to apply a wide range of methods and techniques in the inspection of government weapons and explosives storage locations, maintenance facilities, demolition areas, etc., to determine compliance with applicable regulatory provisions.
4. Knowledge of physiological and psychological factors sufficient to conduct a wide variety of activities promoting safe working practices, use of protective gear, and proper equipment operations.
5. Knowledge of the requirements, methods, and techniques of accident and mishap investigation of normal to high risk weapons and explosives storage and operating areas, to include fact-finding, analysis, risk assessment, resolution of safety problems, and submitting formal reports.
6. Knowledge of organizational and communication skills to develop working relationships and manage program segments with military, civilian, professional, and technical populations. Verbal and writing skills sufficient to prepare safety presentations/briefings, formal training materials, investigative reports, weapons and explosives safety inspections and surveys.
7. Knowledge of standards, procedures, methods, and techniques applicable to explosives facility construction; sound technical knowledge sufficient to analyze safety design features and specifications; and to develop new methods and procedures to identify or control hazardous processes during weapons and explosives use, handling, storage and demolition.