Clarification from the agency

Open to the Public (U.S. Citizens, Nationals or those who owe allegiance to the U.S.); Also open to eligible PPP applicants.

This is a Direct Hire Public Notice, under this recruitment, applications will be accepted for each location and/or installation identified in this Public Notice and selections are made for vacancies as they occur. There may or may not be actual/projected vacancies at the time you submit your application.

This Public Notice is to gather applications which may or may not result in a referral or selection.

This position is being filled under DoD Direct Hire Authority (DHA) for Certain DoD Personnel, P.L. 118-31, Sec 1250 B(i)(2), dated 12/22/2023.

Please read this Public Notice in its entirety prior to submitting your application for consideration.

Incumbents typical work assignments may include the following:

• Serving as Electrical engineer and technical authority for the Raven Rock Mountain Complex. Works closely with RRMC management officials, other engineers and technicians, other WHS divisions as well as RRMC Mission partners. Technical expert in the electrical engineering aspects of various types of facility electrical and electrical generation and power distribution systems with responsibility for planning, coordinating, and conducting special studies and evaluations of a wide range of electrical systems of major size and complexity as found in facilities.
• Reviewing studies, scopes of work and preliminary and final design plans prepared in-house and by Architect-Engineers to assure technical accuracy of all portions relative to his specialization, for compliance with all instructions and changes provided during the course of design development, and for feasibility clarity and consistency with related engineering features.
• Developing original plans, design analyses and specifications for the most complex electrical features of design work accomplished in-house.
• Work with Site and Department of Defense officials in the maintenance, documentation, and decision-making regarding energy management, and energy-related projects.
• Works as the Site energy manager.

Conditions of employment

• U.S. Citizenship is required
• Males born after 12-31-59 must be registered or exempt from Selective Service (see https://www.sss.gov/Home/Registration)
• Total salary varies depending on location of position
• May be required to successfully complete a probationary/trial period
• Must be determined suitable for federal employment
• Required to participate in the direct deposit program
• This position is subject to pre-employment and random drug testing
• This position requires you to file an OGE Form 450, Confidential Financial Disclosure Report, upon appointment and will be required to file annually
• This position may require up to 20% occasional travel away from the normal duty station for official business on military or commercial aircraft
• The incumbent may be require to work other than normal duty hours, which may include evenings, weekends, and/or holidays and/or overtime
• This position may require you to stay beyond the duration of the normal workday and is subject to overnight or multi-day relocations in emergency situations or for exercises; relocation could be for an extended period of time
• The employee assigned to this position is designated as a MISSION ESSENTIAL EMPLOYEE
• The incumbent is required to wear protective equipment

Qualifications

MISSION ESSENTIAL POSITION: Mission essential employees may be required to report for, or remain at, work in dismissal or closure situations due to adverse weather conditions, natural disasters, or other emergency situations ( e.g., building closure due to power outage) causing disruptions of government operations, and are required to maintain contact with their supervisor during any dismissal or closure situation unless specifically excused by their supervisor.

In order to qualify for this position, you must meet the requirements described below.

The Electrical Engineering Series, 0850, has Basic Requirements that must be met in addition to the specialized experience.

Basic Requirement for Electrical Engineer:

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

You may qualify at the GS-13 level, if you fulfill the following qualification requirement:

One year of specialized experience equivalent to the GS-12 grade level in the Federal service (experience may have been gained in the private sector) that demonstrates your experience:

1. Applying engineering and/or architectural theories, principles, concepts, standards and methods of electrical engineering to perform the full range of assignments which may involve electric techniques, electrical systems, electrical design, power, operations and/or life safety practices of buildings/facilities.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). You will receive credit for all qualifying experience, including volunteer experience.

All qualifications and education requirements must be met by the closing date of this announcement and clearly documented in your resume.

Your resume may not exceed two (2) pages. For qualifications determinations, it is recommended that applicants include their months and hours worked per week for each employment listed on their resume. If a determination is not able to be made about the duration of your creditable experience for qualification requirements, you will be removed from consideration.

Read more about what should I include in my federal resume at https://help.usajobs.gov/faq/application/documents/resume/what-to-include

ACTIVE DUTY SERVICE MEMBERS: Federal agencies treat active duty service member as veterans, disabled veterans, and preference eligible, when they submit, as part of their application package, a "certification" of active service in lieu of a DD-214, indicating the service member is otherwise eligible and will be discharged or released within 120 days from the date of submission.. A "certification" letter should be on letterhead of the appropriate military branch of the service and contain (1) the military service dates including the expected discharge or release date; and (2) the character of service. This "certification" must include your rank, dates of active duty service, type of discharge and character of service (i.e. honorable), and date any terminal leave will begin. It must be signed by, or by direction of, the adjutant, personnel officer, or commander of your unit or higher headquarters. Active duty members that fail to provide a valid "certification" of service with their initial application will be found "not eligible". Members may be appointed before the effective date of their military retirement/separation if they are on terminal leave.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Note: This position is being filled under the DoD Direct Hire Authority (DHA). As such, veterans' preference, competitive rating and ranking, and category rating procedures do not apply.

This position is being filled under the Department of Defense Direct Hire Authority (DHA) for Certain Personnel of the DoD, which allows the agency to appoint any qualified candidate without regard to competitive rating and ranking procedures. Veterans' Preference does not apply, and rating and raking assessments are not utilize in evaluating applications. Selection will be made from among all applicants determined to meet the minimum qualifications for the position.

Applicants will be evaluated based on their experience, education, and training as reflected in their resume and supporting documentation, with emphasis on the following critical competencies:

• Electrical Engineering
• Project Management
• Design & Construction Oversight
• Technical Problem Solving

Only applicants who meet the qualification requirements will be referred to the selection official for consideration.

DOD PPP candidates using Application-Based Procedures:

Military Reserve (MR) and National Guard (NG) Technicians PPP Eligible: MR and NG technicians PPP applicants must be selected and placed at the full performance level if determined well qualified. You must include a completed copy of the Military Reserve and National Guard Technician PPP Self-Certification Checklist (DD-3145-3) to verify your eligibility for Military Reserve and National Guard Technician preference.

Military Reserve (MR) and National Guard (NG) Technicians Receiving Disability Retirement PPP Eligible: MR and NG technicians receiving disability retirement PPP applicants must be selected and placed at the full performance level if determined well qualified. You must include a completed copy of the Military Reserve and National Guard Technician Disability PPP Self-Certification Checklist (DD-3145-2) to verify your eligibility for Military Reserve and National Guard Technician Disability preference.

Retained Grade PPP Eligible: Retained Grade PPP applicants must be selected and placed at the full performance level if determined well qualified. You must include a completed copy of the Retained Grade PPP Self-Certification Checklist (DD-3145-1) to verify your eligibility for Retained Grade preference.