Clarification from the agency

United States Citizens

Duties & Responsibilities:
1. Performs scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Completes operational checks, inspections, tests, trouble shooting, removal and replacement of Line Replaceable Units (LRUs) which are linked with integrated systems and LRUs which are independent or associated with nonintegrated systems. Isolates unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and Flight Line Test Systems (FLTS). Solves complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjusts and aligns system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Installs serviceable components into aircraft and performs total systems alignment and harmonization in accordance with existing technical orders and directives. Accomplishes technical order compliances, modification of components/systems and completes thorough system checks for proper operation.

2. Reviews and analyzes maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Aligns, adjusts, and performs final calibrations on integrated systems to determine successful repairs. Analyzes equipment failure and malfunctions and suggests changes to improve operation. Monitors the operation of complex, interrelated systems, analyzes operating trends, proposes preventative maintenance down time to assure continued operating capability, and recommends components for overhaul or engineering evaluation for disposal. Applies technical data and equipment specifications to determine the impact that equipment modifications or substitutions will have upon integrated multi-system operations and various maintenance alignment procedures.

3. Troubleshoots operational malfunctions and analyzes system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests. Performs on and off-equipment maintenance on systems such as automatic flight control, instruments, communication, navigation, and inertial navigation. Coordinates back shop bench check (if applicable, completes testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units (SRUs). Uses a variety of test equipment such as automatic test equipment (ATE), oscilloscopes, frequency counters, phase-angle voltmeters, optical alignment equipment, digital pitot-static testers, programming units and special purpose test analyzers.

4. Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data, and assists in design changes as necessary. Conducts aircrew debriefing to determine the nature of system malfunctions. Documents all discrepancies and maintenance actions performed by inputting information into the electronic records information systems (i.e.: CAMS, IMDS, GO-81, REMIS). Recommends hardware and software changes. Submits change recommendations to Technical Orders. Requisitions supply assets and processes repairable assets in accordance with Standard Base Supply System requirements. Documents maintenance actions in aircraft forms and documents man-hour expenditures and maintenance actions in the maintenance computer system. Maintains Electronic Warfare (EW) (if applicable) and analysis equipment such as infrared/radar warning equipment, infrared/radar jamming equipment, chaff/flare dispensing systems, signal analysis equipment, recorders, direction finders, and special purpose test equipment.

5. May upload and download chaff/flare dispensers. This hazardous task may involve the inspection, storage and handling of explosive devices; to include flares, chaff, impulse cartridges and similar items. Conducts on-the-job training on assigned systems and related support equipment and tasks to include classroom instruction as necessary. Provides training to lower graded personnel concerned with the repair of integrated avionics systems. Provides training to newly assigned personnel regardless of grade level. Prepares for and participates in Aerospace Expeditionary Force (AEF) tasking, deployments and various inspections and exercises. Processes and accounts for due-in from maintenance (DIFM) supply assets. Ensures that material and equipment are properly stored, protected and maintained and that funds are not obligated for material or parts without proper justification.

6. Performs other as duties as assigned.

Conditions of employment

1) National Guard Membership is required.

2) Males born after 31 December 1959 must be registered for Selective Service.

3) Federal employment suitability as determined by a background investigation.

4) May be required to successfully complete a probationary period.


MILITARY REQUIREMENTS: OFFICER & ENLISTED

SECURITY CLEARANCE: Must maintain appropriate level of security clearance.

***LOUISIANA NATIONAL GUARD MEMBERS - Acceptance of this position may result in the loss of contracted incentive(s). For further details, contact the LANG State Incentive Manager, at (504) 278-8116 (ARMY) 391-8336 (AIR FORCE). ***

NOTICE: THIS EMPLOYER PARTICIPATES IN E-VERIFY: FEDERAL LAW REQUIRED ALL EMPLOYERS TO VERIFY THE IDENTITY AND EMPLOYMENT ELIGIBILITY OF ALL PERSONS HIRED TO WORK IN THE UNITED STATES.

NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted service position that requires membership in a compatible military assignment in the National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.

Participation in direct deposit is mandatory.

Qualifications

GENERAL EXPERIENCE: Must possess experience or training which demonstrates the applicant's knowledge to perform duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes; ability to collect and analyze data effectively, efficiently, and accurately; able to apply procedures and directives by reading and interpreting material. Ability to communicate clearly and effectively.

SPECIALIZED EXPERIENCE: Must possess at least Thirty-Six (36) months of experience or training demonstrating the ability to repair, overhaul, rebuild, align, and adjust complete multi-systems such as the electronics package in a highly automated aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation, and other complex functions are performed by numerous systems which are extensively interconnected with data feedback loops; applies comprehensive knowledge of all major units of the complete multisystem, i.e., how they function independently, how they are interfaced in the integrated subsystems, and how the subsystems interact to achieve operating specifications; able to determine proper sequence of operations and start point in sequential operations in order to pinpoint areas of malfunction; extensive practical knowledge of the theories and practices of electromagnetic propagation, electronic circuits, computer theory, hydraulic or pneumatic control and power systems, and many other areas covering a wide range of system applications. Broad knowledge of the interactions among a number of closely integrated complex systems; knowledge of mathematics, including trigonometry, to calculate power relation ships, signal phasing, etc; ability to interpret drawings for multisystem complexes such as the complete electronics package for an aircraft including numerous interconnections of signal paths both between and within individual subsystems of the multisystem complex; ability to isolate malfunctions of complete multiple integrated systems consisting of closely interrelated fire control, bombing-navigation, flight control, countermeasures or similar systems and to determine the methods of repair where extremely complex relationships exist among numerous interconnected units and control circuits not only within the individual control systems but between them as well, requiring complete knowledge of all electronic, mechanical, and or optical systems and units. Performs on-equipment or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft, and/or maintenance on automatic flight control systems, instrument systems, inertial and radar navigation system.

CONDITIONS OF EMPLOYMENT & NOTES:

1. Must be able to obtain and maintain the appropriate security clearance of the position.
2. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
3. Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
*4. Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day.
5. The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):

Knowledge of Equipment Assembly, Installation, Repair, etc., Trouble shooting (Electronic Equipment), and Use of Test Equipment: Electronics