Skip to main content
U.S. flag
Back to results

AIRCRAFT ENGINE MECHANIC

Department of the Air Force
Air National Guard Units
Nevada Air National Guard
This job announcement has closed

Summary

This position is for a AIRCRAFT ENGINE MECHANIC, PD# D1636000, part of the Nevada Air National Guard. This position is located in an Air National Guard Aviation Wing, Maintenance Group, Maintenance Squadron, Propulsion Element. The primary purpose of this position is to maintain, troubleshoot, remove, repair, install, certify, test and perform operational checks on the turboprop engines, propellers, and associated propulsion system components.

Overview

Help
Reviewing applications
Open & closing dates
09/16/2025 to 09/26/2025
Salary
$30.66 to - $35.79 per hour
Pay scale & grade
WG 10
Location
1 vacancy in the following location:
Reno, NV
1 vacancy
Remote job
No
Telework eligible
No
Travel Required
Occasional travel - You may be expected to travel for this position.
Relocation expenses reimbursed
No
Appointment type
Permanent
Work schedule
Full-time
Service
Excepted
Promotion potential
None
Supervisory status
No
Security clearance
Secret
Drug test
No
Position sensitivity and risk
Noncritical-Sensitive (NCS)/Moderate Risk
Trust determination process
Financial disclosure
No
Bargaining unit status
Yes
Announcement number
NV-12791464-25-067
Control number
846168600

This job is open to

Help

Clarification from the agency

THIS POSITION IS OPEN TO CURRENT NEVADA AIR NATIONAL GUARD MEMBERS ONLY ***This is an open continuous announcement. The initial cutoff for this position will be 25 SEP 2025. Recruitment for this position will continue through the closing date until filled.***

Duties

Help

(1) Removes, installs, certifies, repairs, modifies, overhauls, and installs turboprop engines, reduction gear boxes, turbine modules, compressor modules, auxiliary power units, propellers and related propeller components as required. Performs maintenance on all propulsion systems including troubleshooting and diagnosing defects, certifying, conducting bench checks, performing in-shop and on-equipment repairs and overhauls. Diagnoses malfunctions using computerized test equipment, schematic diagrams, technical publications and performs the appropriate repair according to the test results and analysis. Determines the extent of disassembly necessary to repair, overhaul, replace and certify all engine, propeller and auxiliary power unit parts. Cleans and inspects engine and propeller component parts such as turbines, gearboxes, blades, gears, bearings, etc. Assembles engines, propellers and auxiliary power units, adhering to prescribed procedures, torque values, safety methods and clearances.

(2) Modifies engines, propellers, auxiliary power units, and components in accordance with Time Compliance Technical Orders (TCTO) directives; removes and installs engine quick change kits; prepares engines for installation and installs engine and propeller assemblies on aircraft. Evaluates
technical problems of repair, overhaul, modification and installation of aircraft propulsion systems. Solves all types of maintenance problems and performs bench checks and test engine and propeller assemblies for serviceability.

(3) Performs operational checks of installed propellers, engines, auxiliary power units and subsystems during aircraft maintenance ground runs in accordance with approved checklists. Employs test equipment such as computer borescope, fuel pressure gauges, air pressure gauges, and
alignment fixtures. Utilizes special tools and precision measuring equipment, high-pressure hydraulic test equipment, and electronic test equipment.

(4) Performs isochronal and special evaluations on engines, propellers and auxiliary power units. Interprets certification findings and determines adequacy of corrective action. Certifies installed and repaired engines for compliance with technical publications. Performs fixed and mobile test stand
functions (which may include maintenance of engine test cell facility); installs special test equipment; performs pre-operational and post operational checks. Operates engines and propellers and records test data. Operates, certifies, and maintains computerized engine test/trim automated systems (ETTAS) on the engine test cell. Evaluates, identifies and corrects problems on propeller and engine components causing vibration or impending failure using the ETTAS system, and vibration analyzer. Evaluates engine and propeller performance by computing engine torque and specific fuel consumption. Monitors engine RPM and turbine inlet temperatures. Evaluates engine and propeller performance and accepts or rejects the individual components. Removes engine and propeller from test stand and prepares units for aircraft installation or storage.

(5) Performs aircraft full power runs and complete engine and propeller efficiency checks. Clears Red X symbol documentation on engine and propeller related components.

(6) Prepares man-hour data collection and required forms for input into the Core Automated Maintenance System (CAMS) or the G081 (AFI 22-2101, CAMS for Mobility). Reviews and assists in maintaining Technical Orders (TOs) and other technical publications and directives pertinent to the
element.

(7) Maintains bench stock, parts, and equipment. Assists the material control function in identifying part numbers and stock numbers for processing and controlling of repair cycle assets.

(8) Provides on-the-job training for assigned personnel. Plans and conducts formal classes of instruction in techniques of repair and maintenance of aircraft engine, propeller, auxiliary power unit, and related equipment and in the use of diagrams, blueprints, wiring schematics and technical publications. Evaluates effectiveness of training by observation and through written and oral examinations. Advises supervisor of the experience and skill levels of assigned personnel. Maintains training documentation.

(9) Prepares for and participates in various types of readiness evaluations such as Operational Readiness Inspections, Inspector General and Unit Evaluation Inspections, mobility, and command support readiness inspections, mobility, and command support exercises. Perform such additional
duties as structural fire fighting, aircraft fire/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operator, maintenance of facilities and equipment, and/or serves as a member of a team to cope with natural disasters or civil emergencies. Travels in military
aircraft and drives military vehicles as required.

(10) Performs other duties as assigned

Requirements

Help

Conditions of employment

MILITARY REQUIREMENTS:

Compatible military grade and assignment required prior to the effective date of placement.
In compliance with Title 32 United States Code, the compatible military skill set is determined by the applicable service manpower requirements. Upon selection, individuals are assigned to the authorized position and its compatible military skill in accordance with Air force skill classification directives, statutes, and National Guard Bureau regulations. The Dual Status technician must obtain and maintain all military skill requirements in regard to training, education, certifications, experience. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.

Compatible Military Assignment:
ENLISTED: E1 to E5
COMPATIBLE DAFSC: 2XXXX

*Other Requirements & Conditions of Employment:
- National Guard Membership is required.
- Males born after 31 December 1959 must be registered for Selective Service.
- Federal employment suitability as determined by a background investigation.
- Must be able to obtain and maintain the appropriate security clearance of the position.
- May be required to successfully complete a probationary period.
- Must maintain local network access.
- Wear the uniform appropriate for the members' grade and component of the armed forces, maintaining standards of conduct and appearance.
- This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
- Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
- May occasionally be required to work other than normal duty hours; overtime may be required.
-The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
- For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license.

Qualifications

In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities, to perform the duties of the specific position for which you are being considered. Education requirement is based upon the qualification standards for the specific position and is stated under the heading "EDUCATION". Your resume is the key means we have for evaluating your skills, knowledge, and abilities, as they relate to this position. Therefore, we encourage you to be clear and specific in describing your experience. EACH APPLICANT MUST FULLY SUBSTANTIATE (IN THEIR OWN WORDS) THAT THEY MEET THE REQUIREMENTS OF THE SPECIALIZED EXPERIENCE LISTED BELOW; OTHERWISE, THE APPLICANT WILL BE CONSIDERED UNQUALIFIED FOR THIS POSITION. DO NOT COPY FROM THE VACANCY ANNOUNCEMENT OR THE POSITION DESCRIPTION OR YOU MAY BE DISQUALIFIED.

GENERAL EXPERIENCE: Must have experience or training that has provided the ability to perform assembly and disassembly operations and make prescribed modifications to aircraft engines, engine assemblies, and accessories in accordance with technical specifications, procedures, and
requirements. Experience using hand and power tools common to the trade.

SPECIALIZED EXPERIENCE: Must have experience or training performing standard, routine assembly and disassembly operations and making prescribed modifications to aircraft engines, engine assemblies, and accessories. Experience or training performing maintenance overhaul,
troubleshooting, testing, and repair of aircraft engines, engine components, and powertrai ns for fixed and/or rotary wing aircraft. Experience determining maintenance needed from work orders, inspection reports, historical records, and diagnosis.

Education

There is no specific education requirement for this position. The applicant's record of experience and/or training must show possession of the knowledge, skills and abilities needed to fully perform the duties of the position.

You must provide transcripts or other documentation to support your Training/Educational claims. To receive credit for Training/Education, you must provide documentation of proof that you meet the Training/Education requirements for this position.

Additional information

- If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
- This is a Bargaining Unit position.
- Applicants who feel they have restoration rights to this position should contact the HRO.
- Military Incentives - Bonuses and Student Loan Repayment Program: If you are selected for this position, you may lose your eligibility for your National Guard Enlistment/Reenlistment Bonus and/or Student Loan Repayment Program incentives. In order to avoid losing your incentive eligibility, you should check with your incentives manager prior to accepting an offer for the position.
- Participation in Direct Deposit is mandatory.

AREA OF CONSIDERATION: In accordance with the State Merit Placement Plan, candidates will be considered in order of their area of consideration category as appropriate.

TERM POSITIONS: "Temporary-Not to Exceed" (TEMP) and "Temporary-Indefinite" (INDEFINITE) are considered to be TERM positions and are limited in duration to 4 years maximum. Employees reaching maximum TERM appointment limit of 4 years may be terminated.

CONVERSION OF TERM (TEMPORARY/INDEFINITE) POSITIONS: Positions advertised as TEMP or INDEFINITE may be non-competitively converted to INDEFINITE or PERMANENT without further competition at a future date contingent upon available funding. For TEMP PROMOTIONS, position may be non-competitively converted upon expiration of the incumbent's USERRA rights.

RECRUITMENT/RELOCATION INCENTIVE: Recruitment and/or Relocation incentives may be available, if eligible. Incentives are subject to funding availability and TAG-NV approval and are not guaranteed.

PERMANENT CHANGE OF STATION (PCS): PCS funding is NOT authorized. If you do not reside in the location of the position, you will be required to relocate at your own expense.

SELECTED RESERVE INCENTIVE PROGRAM: Acceptance of this position will cause termination of Federal bonuses pursuant to respective Selected Reserve Incentive Programs (SRIP). This termination may be with or without recoupment of payments already made.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcement. You will be rated based on the information provided in your resume and responses to the Occupational Questionnaire, along with your supporting documentation to determine your ability to demonstrate the following knowledge, skills and abilities/competencies related to the job requirements:

1 Knowledge of aircraft engine parts and components and how they function.
2 Skill in the use and interpretation of schematic diagrams and other technical publications.
3 Ability to isolate mechanical and electrical problems by use of troubleshooting, test equipment, and instructions.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities or you may be found ineligible/not qualified. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.