Skip to main content
U.S. flag
Back to results

General Engineer

Department of Commerce
Bureau of Industry and Security
Strategic Trade (ST), Office of National Security Controls (ONSC)
This job announcement has closed

Summary

This vacancy is for a General Engineer at the Department of Commerce, in the Bureau of Industry and Security, within the Department of Commerce, Office of Assistant Secretary for Export Administration (EA), Strategic Trade (ST), Office of National Security Controls (ONSC).

If interested in this wonderful career opportunity, you are encouraged to apply!

Overview

Help
Reviewing applications
Open & closing dates
08/01/2025 to 08/15/2025
Salary
$120,579 to - $156,755 per year
Pay scale & grade
GS 13
Location
Few vacancies in the following location:
Washington, DC
Remote job
No
Telework eligible
Yes—as determined by the agency policy.
Travel Required
Occasional travel - You may be expected to travel for this position.
Relocation expenses reimbursed
No
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
14
Job family (Series)
Supervisory status
No
Security clearance
Sensitive Compartmented Information
Drug test
Yes
Position sensitivity and risk
Special-Sensitive (SS)/High Risk
Financial disclosure
Yes
Bargaining unit status
No
Announcement number
BIS-OASEA-DHA-25-12769330
Control number
842327300

This job is open to

Help

Clarification from the agency

This position is being advertised under Direct-Hire Authority. Under this authority, competitive rating, ranking and veterans' preference procedures do not apply.

Duties

Help

As a General Engineer you will perform the following duties:

  • Conducts studies of major categories of commodities and technical data in terms of their potential for unwanted technology transfer, and of technology transfer mechanisms of controlled commodities and technical data to identify effective control techniques and strategies.
  • Monitors technology transfer developments and prepares analysis and recommendations, as appropriate, to keep the export control system grounded on a sound technical foundation.
  • Integrates U.S. industry's economic/regulatory concerns into the Bureau's development of regulations and the Export Control Reform Act of 2018.
  • Represents the Bureau and the Department's position at interagency meetings.
  • Establishes and maintains contacts with exporters and manufacturers to provide technical advice for specific transactions and to remain informed on commodity and industry developments.
  • Prepares technical analysis reports that evaluate the strategic applications of many of the commodities described on the Commerce Control List (CCL).
This Job Opportunity Announcement may be used to fill other General Engineer GS-0801-13, Full Performance Level (FPL) GS-14 positions within the Department of Commerce in the same geographical location with the same qualifications and specialized experience.

Requirements

Help

Conditions of employment

  • You must be a U.S. citizen to apply for this position.
  • You must successfully pass a background investigation. This may include a credit check, a review of financial issues, as well as certain criminal offenses and illegal use of possession of drugs.
  • A probationary period may be required.
  • Selective Service: Males born after 12/31/59 must be registered or exempt from Selective Service (see https://www.sss.gov/).
  • Selective Service (see https://www.sss.gov/).
  • If you receive a conditional offer of employment for this position, you will be required to complete an Optional Form 306, Declaration for Federal Employment, and to sign and certify the accuracy of all information in your application.
  • All Federal employees are required to have Federal salary payments made by direct deposit to a financial institution of their choosing.
  • Security Clearance: You will be required to obtain and maintain a Top Secret security clearance with Sensitive Compartmented Information (SCI) eligibility. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  • Drug Test: Yes. You will be required to submit to pre-employment testing to screen for illegal drug use prior to appointment and random drug testing thereafter.
  • License required: No
  • Pre-employment physical required: No
  • Bargaining Unit Position: No
  • Confidential Financial Disclosure Report (OGE form 450): Yes
  • Permanent Change of Duty Station (PCS) Expense: will not be paid
  • Two-Page Resume Limit: Resumes must not be more than two standard single-sided pages (or one page if submitting a front and back, hard-copy).

Qualifications

Basic Requirements:

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.

3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.

4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive).

Qualification requirements in the vacancy announcements are based on the U.S. Office of Personnel Management (OPM) Qualification Standards Handbook, which contains federal qualification standards. This handbook is available on the Office of Personnel Management's website located at: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/

Applicants must possess one year of specialized experience equivalent in difficulty and responsibility to the next lower grade level in the Federal Service. Specialized experience is experience that has equipped the applicant with the particular competencies/knowledge, skills and abilities to successfully perform the duties of the position. This experience need not have been in the federal government.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations e.g., professional; philanthropic, religious; spiritual; community, student, social). Volunteer work helps build critical competencies; knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

SPECIALIZED EXPERIENCE: To qualify at the GS-13 grade level, you must possess one full year (52 weeks) of specialized experience equivalent to the GS-12 in the Federal service. Specialized experience is defined as:

  • Applying engineering experience to analyze policies associated with commodities or technologies relevant to one or more of the following areas: Semiconductors, (including semiconductor manufacturing (e.g., covering material characterization, electrical testing, process modeling, or yield analysis), Lasers systems (e.g., optics, propagation physics, beam diagnostics, thermal effects), Artificial Intelligence (AI), Machine Learning (ML) systems, computer science, electronics systems; and
  • Collaborating with engineering and program management personnel on engineering projects on a wide range of commodities and technologies.

Education

There is a positive education requirement for this position. See the Qualifications, section above, and the Required Documents section regarding transcripts.

Additional information

Information about CTAP and ICTAP eligibility is on the Office of Personnel Management's Career Transition Resources website at: Employee Guide to Career Transition

CTAP applicants MUST submit the following documents:

  1. A copy of your specific RIF notice; notice of proposed removal for failure to relocate; a Certificate of Expected Separation (CES); or certification that you are in a surplus organization or occupation (this could be a position abolishment letter, a notice eligibility for discontinued service retirement, or similar notice).
  2. A copy of your SF-50 "Notification of Personnel Action", noting current position, grade level, and duty location;
  3. A copy of your latest performance appraisal including your rating; and
  4. Any documentation from your agency that shows your current promotion potential.
ICTAP applicants MUST submit the following documents:
  1. A copy of your RIF separation notice; notice of proposed removal for failure to relocate; notice of disability annuity termination; certification from your former agency that it cannot place you after your recovery from a compensable injury; or certification from the National Guard Bureau or Military Department that you are eligible for disability retirement;
  2. A copy of your SF-50 "Notification of Personnel Action" documenting your RIF separation, noting your positions, grade level, and duty location, and/or Agency certification of inability to place you through RPL, etc;
  3. A copy of your latest performance appraisal including your rating; and
  4. Any documentation from your agency that shows your current promotion potential.
Reasonable Accommodation (RA) Requests: If you believe you have a disability (i.e., physical or mental), covered by the Rehabilitation Act of 1973 as amended that would interfere with completing the USA Hire Competency Based Assessments, you will be granted the opportunity to request a RA in your online application. Requests for RA for the USA Hire Competency Based Assessments and appropriate supporting documentation for RA must be received prior to starting the USA Hire Competency Based Assessments. Decisions on requests for RA are made on a case-by-case basis. If you meet the minimum qualifications of the position, after notification of the adjudication of your request, you will receive an email invitation to complete the USA Hire Competency Based Assessments, based on your adjudication decision. You must complete all assessments within 48 hours of receiving the URL to access the USA Hire Competency Based Assessments if you received the link after the close of the announcement. To determine if you need a RA, please review the Procedures for Requesting a Reasonable Accommodation for Online Assessments. (https://appsupport.usastaffing.gov/hc/en-us/sections/28980686389652-Reasonable-Accommodation-Information)

Current or Former Political Appointees: The Office of Personnel Management (OPM) must authorize employment offers made to current or former political appointees. If you are currently, or have been within the last 5 years, a political Schedule A, Schedule C, Non-career SES, or Presidential Appointee employee in the Executive Branch, you must disclose this information to the Human Resources Office.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Under the provisions of the Direct-Hire Authority (DHA), rating, ranking and veterans' preference does not apply. While veterans' preference does not apply in DHA, preference eligibles are encouraged to submit their supporting documentation (DD-214 stating disposition of discharge or character of service, VA letter, SF-15, etc.).

You will be evaluated based on how well you meet the qualifications listed in this vacancy announcement. Your qualifications will be evaluated based on your application materials (e.g., resume, supporting documents), your responses on the application questionnaire, and your responses to all assessments required for this position.

Applicants who meet the qualification requirements, as defined in the job opportunity announcement, will be referred for selection consideration.

CTAP/ICTAP Applicants: Applicants applying as CTAP or ICTAP candidates, and are determined CTAP or ICTAP eligible, must exceed the minimum qualification requirements to be referred under this selection priority placement program by attaining at least a rating of 85 out of 100. The resume, supporting documents, responses on the application questionnaire, and your responses to all assessments required for this position will be assessed.

CTAP/ICTAP eligibles who are not determined well-qualified by scoring at least 85 will not be referred under the CTAP/ICTAP selection priority placement program; however, you will be referred for selection consideration for those eligibilities where you have selected "Yes".

Overstating your qualifications and/or experience in your application materials or application questionnaire may result in your removal from consideration. Cheating on an assessment may also result in your removal from consideration.

The technical assessment will evaluate you on the following competencies; please do not provide a separate written response:

  • Technical Competence (General Engineering)
  • Strategic Thinking
  • Technical Credibility
  • Planning and Evaluating
Do NOT include the following types of information in your resume/application. If any are included, you will be deemed INELIGIBLE for consideration.
  • Classified or government sensitive information
  • Social Security Number (SSN)
  • Photos of yourself
  • Personal information, such as age, gender, religious affiliation, etc.

To preview the questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12769330

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.