The primary purpose of this position is to plan, lay out, fabricate, modify, repair, assemble, and install complex aircraft sheet metal and composite honeycomb adhesive bonded parts, items, and assemblies that have combined straight and curved edges of irregular curves and planes; and perform the full range of painting, including surface preparation, blending and matching paints, and coating of various surfaces requiring fine finishes and decorative
effects.
Summary
The primary purpose of this position is to plan, lay out, fabricate, modify, repair, assemble, and install complex aircraft sheet metal and composite honeycomb adhesive bonded parts, items, and assemblies that have combined straight and curved edges of irregular curves and planes; and perform the full range of painting, including surface preparation, blending and matching paints, and coating of various surfaces requiring fine finishes and decorative
effects.
Plans and lays out work from blueprints, sketches, drawings, specifications, and work orders in manufacturing aircraft sheet metal structures which have combined straight and curved edges, and irregular angles, planes, and curves.
Examines aircraft sheet metal structures to locate cracks, breaks, holes, bulges, dents, and loose or missing rivets.
Prepares various surfaces of interior and exterior aircraft sheet metal structures by mechanically and chemically removing old paint and rust, filling cracks, sanding, and applying fillers and base coats.
Repairs, modifies, and manufactures honeycomb adhesive bonded composite aircraft structures that have contours that must be reestablished or that require the manufacture of a mold using the available part or pattern.
Uses and maintains tools. Utilizes safety practices and procedures following established safety rules and regulations and maintains a
safe and clean work environment.
Males must be registered for Selective Service, see www.sss.gov
A security clearance may be required
This position is subject to provisions of the DoD Priority Placement Program
Disclosure of Political Appointments
The work may require the employee to drive a motor vehicle. An appropriate, valid driver's license may be required for the position
May be required to be certified for working with and/or removing hazardous materials
May be required to \Vork shifts or uncommon tours of duty. Subject to call back to meet emergency situations
May be required to obtain an appropriate clearance to perform work in sensitive areas
Must be able to obtain and maintain a Secret Clearance
This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. Employee must pass initial and periodic short notice drug testing
Illegal drug use by employees in sensitive positions presents a dear threat to the mission of the Air Force, national security, and public safety
Qualifications
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the Metal Work Group, Sheet Metal Mechanic. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is WG-3806, SHEET METAL MECHANIC (AIRCRAFT/PAINTER) without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
I. Knowledge of the characteristics and properties of any metals or composite materials used in the trade, e.g., stainless steel, magnesium, honeycomb and alloys; of advanced shop mathematics and principles of radial-line development combined with parallel-line development to calculate and devise patterns involving combined straight and curved edges or irregular curves, angles, and planes; and of a wide range of trade practices, accepted surface
preparation and coating methods, and paints and thinning additives.
2. Knowledge of safety and environmental standards, regulations, and requirements.
3. Skill in planning, laying out work in manufacturing aircraft sheet metal parts and components that have combined straight and curved edges, and irregular angles, planes, and curves; in using complicated measuring instruments such as protractors, calipers, snap ring, heigh~ depth, dial, and screw pitch gauges; and other hand measuring devices; in selecting and applying the proper coating materials for a variety of sheet metal surfaces of aircraft; and in using a wide variety of hand and power tools such as crimping, burring, turning, and bending machines, and soldering and welding machines; and painting tools such as brushes, rollers, spray guns, graining devices, viscosity tester, thickness gauges, and compressors.
4. Skill in reading and interpreting blueprints, diagrams, sketches, and technical specifications.
5. Ability to examine aircraft sheet metal and composite structures to locate cracks, breaks, holes, bulges, dents, and loose or missing rivets and determine the type and extent of repairs needed to restore original strength; and to make repairs by manufacturing and installing new parts and reinforcing, patching, and replacing defective parts, and mixing and applying two part adhesives and sealants.
6. Ability to use computer terminals to maintain records and document actions.
Physical Effort
Work encompasses strenuous physical exertion when bending and shaping the more complex items in handling larger and bulkier items. Physical exertion is moderate and includes prolonged standing, climbing up and down ladders and scaffolding; working in cramped and awkward positions while installing items; and reaching, lifting, and bending while using hand and powered tools. Weight lifted seldom exceeds 50 pounds.
Working Conditions
Works both inside and outside and is subjected to a moderate amount of noise and vibration from shop machines and to a variety of weather conditions. Subject to cuts, bruises, falls, and bums. Required to wear safety glasses when performing eye hazardous operations.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience.
Education
This job does not have an education qualification requirement.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here. To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click here to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
Disabled veteran leave is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click here.
If you have questions regarding this announcement and have hearing or speech difficulties click here.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How you will be evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine your eligibility, qualifications, and quality ranking for this position. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.
BASIS OF RATING: Your application will be rated under the Cut Point procedures based on the extent to which the quality, depth, and complexity of your experience relates to the qualification requirements. Additional points are not added for Veteran's Preference; however, Veteran's Preference is considered where applicable.
Best Qualified Group: Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements. Fully Qualified Group: Candidates in this category possess good skills and experience above the minimum requirements. Basically Qualified Group: Candidates in this category meet the minimum experience requirements.
The resume/documents you submit must support your responses to the online questionnaire. If your application contradicts or does not support your questionnaire responses, you will receive a rating of "not qualified" or "insufficient information" and you will not receive further consideration for this job.
Applicants who disqualify themselves will not be evaluated further.
APPRAISALS/AWARDS: Hiring Managers use objective methods and consider previous performance appraisals and awards in the selection process. Current Federal Civilian employees should list any relevant performance related rating and/or awards in your resume.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
The following documents are required and must be provided with your application. Applicants who do not submit required documentation to determine eligibility and qualifications will be eliminated from consideration. Other documents may be required based on the eligibility/eligibilities you are claiming. Click here to view the AF Civilian Employment Eligibility Guide and the required documents you must submit to substantiate the eligibilities you are claiming.
Online Application: Questionnaire
Resume: For qualification determinations your resume must contain hours worked per week (if part-time) and dates of employment (i.e., month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as insufficient and you will not receive consideration for this position. If you are a current Federal employee or previous Federal employee, provide your pay plan, series and grade, i.e. WG-8852-10. Current Federal Civilian Employees should list any relevant performance related rating (given within the last three years) and/or incentive awards in your resume. Do NOT include photographs (or links to social media such as LinkedIn), inappropriate material, inappropriate content, nor personal information such as age, gender, religion, social security number, etc., on your resume.
Transcripts/Registration/License: If qualifying on education/position requires education, you must submit copies of your transcripts and if required for the position, submit an active, current registration/license.
Veterans: If claiming VEOA, VRA or 30% Disabled Veteran - Submit VOW certification memo or copy of the official DD-Form 214, which must include the character of service (i.e., with an honorable or general discharge). This will be annotated in block 24 on member copy 2, 4, or 7 of the DD-Form 214. If claiming 30% Disabled Veteran, you must also submit a VA Letter or a disability determination from a branch of the Armed Forces. NOTE: All veterans claiming 10-point preference must also submit a SF-15.
Current or Former Federal Civilian Employees (includes current Air Force employees): You must submit a legible copy of a SF-50, Notification of Personnel Action. The SF-50, block 24 must contain "1" or "2" AND block 34 must be a "1". Employees eligible under an OPM approved interchange agreement, block 34 may contain a "1" or "2".
ACTIVE DUTY SERVICE MEMBERS: The VOW Act requires federal agencies to treat an eligible active duty service member as a veteran, disabled veteran, and preference eligible (as applicable) when applying for civil service positions before the effective release or discharge date. Appointment of military members before the release or discharge date is permissible if the member is on terminal leave. At the time the active duty member applies for a civil position, he or she must submit a "certification" memo in lieu of a DD-Form 214, Certificate of Release or Discharge from Active Duty. Active duty members applying for a civil service position without submitting a valid certification memo or DD-Form 214 with their application will render the member ineligible for the position. The certification memo must originate from the member's military service branch on official letterhead and contain the following:
Name/Rank/Grade of Service Member
Branch of Armed Forces
Dates of Active Service (Start and End Date(s)
Expected Date of Discharge/Release from Active Duty
Terminal leave start date (if applicable)
Expected character of service (honorable or general) and type of separation (i.e. separation or retirement)
Must be certified within 120 days of anticipated discharge
Signature by, or by direction of the adjutant, personnel office, unit commander, or higher headquarters commander.
Note: The VOW Act provides tentative preference. If appointed, a DD Form-214 must be submitted upon receipt.
OPTIONAL DOCUMENTS:
Performance Appraisals for Current Federal Civilian Employees - Most recent performance appraisals (dated within last 3 years) showing the official rating of record, signed by a supervisor, or statement why the performance appraisal is unavailable. Awards for Current Federal Civilian employees - List any awards received within the last 3 years on the resume. Note: Applicant must not submit award Notification of Personnel Actions (SF50s).
To begin the process, click the Apply Online button to create an account or log in to your existing USAJOBS account. Follow the prompts to complete the application questionnaire. Please ensure you click the Submit My Application button at the end of the process.
To apply for this position, you must provide a complete Application Package which includes:
1. Your Resume (your latest resume will be used to determine your qualifications). If you submit more than one copy of your resume, only the most recent (latest) version will be reviewed. The latest timestamp will be used to determine which version of your resume is "most recent."
It is your responsibility to check the status and timestamp of all documents you submit as part of your application.
If your resume includes a photograph or other inappropriate material or content, you will not be considered for this vacancy.
For qualification determinations your resume must contain hours worked per week (if part-time) and dates of employment (i.e., hours per week and month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as insufficient and you will not receive consideration for this position.
2. A complete Application Questionnaire
3. Additional Required Documents (see Required Documents section). Ensure all submitted documents contain your full name.
PLEASE NOTE: It is the applicant's responsibility to verify that information entered and/or uploaded, (i.e., resume) is received, accurate, and submitted by the closing date. You may verify your documents have been processed with your application package successfully. You can access your USAJOBS account to do so by clicking here. Uploaded documents may take up to one hour to clear the virus scan.
Human Resources WILL NOT modify or change any answers submitted by an applicant.
JB McGuire-Dix-Lakehurst
2903 McGuire Blvd
JB McGuire-Dix-Lakehurst, NJ 08641
US
Next steps
Once your application package is received an acknowledgement email will be sent.
If you provided an email address, you will receive an email message acknowledging receipt of your application.Your application package will be used to determine your eligibility and qualifications for consideration. If you are determined to be ineligible or not qualified, your application will receive no further consideration.
To check the status of your application or return to a previous or incomplete application, log into your USAJOBS account, select My Applications, and click on the more information link under the application status for this position.
If you do not provide an email address, you are responsible for checking status updates and notifications in USAJOBS. Hard copy notifications will not be sent to you.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
The following documents are required and must be provided with your application. Applicants who do not submit required documentation to determine eligibility and qualifications will be eliminated from consideration. Other documents may be required based on the eligibility/eligibilities you are claiming. Click here to view the AF Civilian Employment Eligibility Guide and the required documents you must submit to substantiate the eligibilities you are claiming.
Online Application: Questionnaire
Resume: For qualification determinations your resume must contain hours worked per week (if part-time) and dates of employment (i.e., month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as insufficient and you will not receive consideration for this position. If you are a current Federal employee or previous Federal employee, provide your pay plan, series and grade, i.e. WG-8852-10. Current Federal Civilian Employees should list any relevant performance related rating (given within the last three years) and/or incentive awards in your resume. Do NOT include photographs (or links to social media such as LinkedIn), inappropriate material, inappropriate content, nor personal information such as age, gender, religion, social security number, etc., on your resume.
Transcripts/Registration/License: If qualifying on education/position requires education, you must submit copies of your transcripts and if required for the position, submit an active, current registration/license.
Veterans: If claiming VEOA, VRA or 30% Disabled Veteran - Submit VOW certification memo or copy of the official DD-Form 214, which must include the character of service (i.e., with an honorable or general discharge). This will be annotated in block 24 on member copy 2, 4, or 7 of the DD-Form 214. If claiming 30% Disabled Veteran, you must also submit a VA Letter or a disability determination from a branch of the Armed Forces. NOTE: All veterans claiming 10-point preference must also submit a SF-15.
Current or Former Federal Civilian Employees (includes current Air Force employees): You must submit a legible copy of a SF-50, Notification of Personnel Action. The SF-50, block 24 must contain "1" or "2" AND block 34 must be a "1". Employees eligible under an OPM approved interchange agreement, block 34 may contain a "1" or "2".
ACTIVE DUTY SERVICE MEMBERS: The VOW Act requires federal agencies to treat an eligible active duty service member as a veteran, disabled veteran, and preference eligible (as applicable) when applying for civil service positions before the effective release or discharge date. Appointment of military members before the release or discharge date is permissible if the member is on terminal leave. At the time the active duty member applies for a civil position, he or she must submit a "certification" memo in lieu of a DD-Form 214, Certificate of Release or Discharge from Active Duty. Active duty members applying for a civil service position without submitting a valid certification memo or DD-Form 214 with their application will render the member ineligible for the position. The certification memo must originate from the member's military service branch on official letterhead and contain the following:
Name/Rank/Grade of Service Member
Branch of Armed Forces
Dates of Active Service (Start and End Date(s)
Expected Date of Discharge/Release from Active Duty
Terminal leave start date (if applicable)
Expected character of service (honorable or general) and type of separation (i.e. separation or retirement)
Must be certified within 120 days of anticipated discharge
Signature by, or by direction of the adjutant, personnel office, unit commander, or higher headquarters commander.
Note: The VOW Act provides tentative preference. If appointed, a DD Form-214 must be submitted upon receipt.
OPTIONAL DOCUMENTS:
Performance Appraisals for Current Federal Civilian Employees - Most recent performance appraisals (dated within last 3 years) showing the official rating of record, signed by a supervisor, or statement why the performance appraisal is unavailable. Awards for Current Federal Civilian employees - List any awards received within the last 3 years on the resume. Note: Applicant must not submit award Notification of Personnel Actions (SF50s).
To begin the process, click the Apply Online button to create an account or log in to your existing USAJOBS account. Follow the prompts to complete the application questionnaire. Please ensure you click the Submit My Application button at the end of the process.
To apply for this position, you must provide a complete Application Package which includes:
1. Your Resume (your latest resume will be used to determine your qualifications). If you submit more than one copy of your resume, only the most recent (latest) version will be reviewed. The latest timestamp will be used to determine which version of your resume is "most recent."
It is your responsibility to check the status and timestamp of all documents you submit as part of your application.
If your resume includes a photograph or other inappropriate material or content, you will not be considered for this vacancy.
For qualification determinations your resume must contain hours worked per week (if part-time) and dates of employment (i.e., hours per week and month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as insufficient and you will not receive consideration for this position.
2. A complete Application Questionnaire
3. Additional Required Documents (see Required Documents section). Ensure all submitted documents contain your full name.
PLEASE NOTE: It is the applicant's responsibility to verify that information entered and/or uploaded, (i.e., resume) is received, accurate, and submitted by the closing date. You may verify your documents have been processed with your application package successfully. You can access your USAJOBS account to do so by clicking here. Uploaded documents may take up to one hour to clear the virus scan.
Human Resources WILL NOT modify or change any answers submitted by an applicant.
JB McGuire-Dix-Lakehurst
2903 McGuire Blvd
JB McGuire-Dix-Lakehurst, NJ 08641
US
Next steps
Once your application package is received an acknowledgement email will be sent.
If you provided an email address, you will receive an email message acknowledging receipt of your application.Your application package will be used to determine your eligibility and qualifications for consideration. If you are determined to be ineligible or not qualified, your application will receive no further consideration.
To check the status of your application or return to a previous or incomplete application, log into your USAJOBS account, select My Applications, and click on the more information link under the application status for this position.
If you do not provide an email address, you are responsible for checking status updates and notifications in USAJOBS. Hard copy notifications will not be sent to you.
Fair and transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
