An official website of the United States government
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION THAT REQUIRES MILITARY MEMBERSHIP.
This National Guard position is for a MACHINIST, Position Description Number PDD1213000 and is part of the Mississippi National Guard.
05/30/2025 to 06/13/2025
$30.55 - $35.66 per hour
WG 11
1 vacancy in the following location:
No
No
Occasional travel - You may be expected to travel for this position.
No
Permanent
Full-time
Excepted
None
No
Yes
MS-12743858-AR-25-100
837902600
Current federal employees of the hiring agency that posted the job announcement.
Current members, those who want to join or transitioning military members.
Must be a CURRENT member of the Mississippi Army National Guard.
As a MACHINIST, WG-3414-11, you will perform machining operations that involve the manufacture of complex and non-routine parts and items from raw stock of differing metals, metal alloys, and other materials in support of maintenance activities. Work products are typically one-of-a-kind and involve unusual trade problems that require a high degree of ingenuity and responsibility.
(1) Fabricates complex and non-routine items that require numerous intricate steps, precise measurements, unusual and compound angles, or nonstandard applications of standard equipment. Performs machining work to manufacture castings, forgings, weldments, and other fabrications. May develop and manufacture specialized tools to manufacture new parts, work rare metals or special alloys, or achieve special finishes.
(2) Plans and lays out work from blueprints, sketches, drawings, or specifications. Lays out work by measuring and marking straight lines, arcs, circles, angles, and location points for setting up work pieces for drilling, tapping, turning, milling, boring, reaming, shaping, grinding, honing, and lapping. Frequently interprets or completes dimensions, tolerances, or specifications that are incomplete or incorrect. This may involve partial changes or complete redesign of items to achieve desired results. Uses a variety of measuring and marking tools, including rules, vernier calipers, micrometers (inside, outside, and depth), dial indicators, surface gauges height gauges, squares, protractors, dividers, and scribes.
(3) Performs machine setups using advanced shop mathematics, and geometric and trigonometric formulas, to compute compound angles, angular indexing, hole patterns, pitch lead, and pitch diameters for various standard and non-standard threads. Determines procedures, tools, machines, equipment, and attachments to use. Occasionally performs machine work that requires new or untried procedures. Performs special setups and improvises conventional machines to perform special machining operations. This requires special knowledges of tooling, types of coolants, machine feeds, and speeds for special operations.
(4) Sets up and operates most types of conventional and/or Computer Numerical Control (CNC) machine tools such as lathes; vertical and horizontal boring mills; bench, plane, or universal milling machines; shapers and planers; internal and external grinders, thread grinders; and radial drills. Grinds and sharpens tools, selects tools, jigs, and fixtures required to achieve specific dimensions, tolerances, and surface finishes. Sets up work in vises and between centers, uses chucks, standard faceplates, angle plate mountings, and collets. Uses mandrel and various other machine tool attachments such as rotary vises, dividing heads, taper attachments, magnetic checks, vertical milling heads, tapping attachments, and rotary tables. Adjusts and sets speeds and feeds of machinery and determines coolants, lubricants, and abrasives to be used, taking into consideration the characteristics of both the machinery and the materials to be worked. Operates machine tools to cut, drill, bore, tap, ream, shape, turn, mill, grind, hone, and lap items. Maintains dimensional accuracy during machining processes frequently, machining to tolerances that are difficult to attain or hold.
(5) Performs precision handwork to finish, fit, and assemble machined parts. Uses various bench-mounted and hand-held powered and non-powered tools such as files, drills, reamers, and buffers. Performs heat-treating, welding, and soldering.
(6) Performs other duties as assigned.
MILITARY REQUIREMENTS:
Military Grades: E3-CW3
Participation in direct deposit is mandatory.
For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license.
CONDITIONS OF EMPLOYMENT & NOTES:
1. Must be able to obtain and maintain the appropriate security clearance of the position.
2. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
3. Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
4. May occasionally be required to work other than normal duty hours; overtime may be required.
5. The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
To apply for this position, you must submit a complete Application Package which includes:
1. RESUME
Your resume MUST BE IN PDF document format. The resume maybe submitted in any writing format but must support the specialized experience described in this announcement.
If your resume includes a photograph or other inappropriate material or content, it will not be used to make eligibility and qualification determinations and you may not be considered for this vacancy. For qualifications determinations your resume must contain SALARIES, HOURS WORKED PER WEEK, AND THE DATES OF EMPLOYMENT FOR EACH JOB.
Example:
$55,000 per year; 40 hours per week, January 2001-July 2009 or January 2001-present. If your resume does not contain this information, your application will be marked as incomplete and you will not receive consideration for this position.
All documents submitted must be in PDF document format.
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12743858~
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/837902600. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.