Clarification from the agency

Current U.S. Customs and Border Protection employees who are currently working in a permanent competitive service position; Career Transition Assistance Plan DHS employees.

Joining Customs & Border Protection's (CBP), Office of Facilities and Management, will allow you to utilize your expertise in engineering to oversee various engineering projects, initiatives, and policies. This position starts at a salary of $105,383.00 (GS-13, Step 1) to $137,000.00 (GS-13, Step 10).

In this General Engineer position, you will become a key team member of Homeland Security professionals planning and coordinating a broad range of facilities/engineering activities covering projects across the nation. Typical Work assignments include:

• Applying knowledge and understanding of engineering disciplines to design, problem solving, program management, planning, cost estimating, and project development assignments throughout the entire project lifecycle.
• Coordinating the planning, design, cost engineering, construction, and environmental considerations with internal and external stakeholders.
• Preparing project directives, business correspondence, reports and information on upcoming conferences which focus on facilities/engineering management.
• Participating in field programming decisions affecting long and short range courses of action for assigned projects.
• Overseeing the preparation of conceptual drawings and diagrammatic sketches which translates facility requirements into plans, elevations, sections and details showing the design, location, and dimensions of the various elements of the structure and quantity and kinds of material to be used.

Conditions of employment

• You must be a U.S. Citizen to apply for this position
• Males born after 12/31/1959 must be registered with Selective Service
• Primary U.S. residency for at least three of the last five years (additional details below)
• You may be required to pass a background investigation
• CBP follows the DHS Drug-Free Workplace Plan for drug testing procedures.
• As an employee of CBP, you will be joining a workforce that is dedicated to accomplishing our mission while maintaining the trust of our Nation by strictly adhering to all government ethics standards. Your conduct will be subject to the ethics rules applicable to all Executive Branch employees, and to CBP employees specifically, as well as the criminal conflict of interest statutes. Once you enter on duty, these rules include obtaining approval for outside employment or business activity, to ensure such employment or business activity is not prohibited and does not interfere or conflict with performance of your official duties. Please review further details via the following link.
• DHS uses E-Verify, an internet-based system, to confirm the eligibility of all newly hired employees to work in the United States. Learn more about E-Verify including your rights and responsibilities.
• Bargaining Unit: This is a bargaining unit covered position, represented under the National Treasury Employees Unions - NTEU. For local chapter contact information see Chapter Websites - National Treasury Employees Union - NTEU.

Qualifications

Basic Requirement: You must provide supporting documentation in your application to show you meet the basic requirement below.

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

You qualify for this position if you meet the basic requirement listed above and possess one year of specialized experience, as described below.

Experience: You qualify for the GS-13 grade level if you possess 1 year of specialized experience equivalent to at least the next lower grade level, performing duties such as:

• Developing preliminary designs and cost estimates based on costs of construction, interest, maintenance, and operation.
• Performing analytical and evaluative work related to the development of schedules, preparation of project plans, budgets, and other execution phase documentation activities for assigned projects.
• Coordinating the planning, design, cost engineering, construction, and environmental considerations for engineering projects of considerable scope and complexity.
• Overseeing various engineering or architectural projects, initiatives, contracts, and/or activities.
• Reviewing work to ensure compliance with regulations and established specifications.

NOTE: Your resume must explicitly indicate how you meet this requirement, otherwise you will be found ineligible. Please see the "Required Documents" section below for additional resume requirements.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

You must:

• Meet all qualification requirements, including education if applicable to this position, subject to verification at any stage of the application process; and
• Meet all applicable Time in Grade requirements (current federal employees must have served 52 weeks at the next lower grade or equivalent grade band in the federal service) by 06/09/2025.

The Office of Personnel Management (OPM) must authorize employment offers made to current or former political appointees. If you are currently, or have been within the last 5 years, a political Schedule A, Schedule C, Non-career SES or Presidential Appointee employee in the Executive Branch, you must disclose this information to the Human Resources Office.

Background Investigation: U.S. Customs and Border Protection (CBP) is a federal law enforcement agency that requires all applicants to undergo a thorough background investigation prior to employment in order to promote the agency's core values of vigilance, service to country, and integrity. During the screening and/or background investigation process, you will be asked questions regarding any felony criminal convictions or current felony charges, the use of illegal drugs (e.g., marijuana, cocaine, heroin, LSD, methamphetamines, ecstasy), and the use of non-prescribed controlled substances including any experimentation, possession, sale, receipt, manufacture, cultivation, production, transfer, shipping, trafficking, or distribution of controlled substances. For additional information on the preemployment process, review the following link: Applicant Resources | CBP Careers

Residency: There is a residency requirement for all applicants not currently employed by CBP. Individuals are required to have physically resided in the United States or its protectorates (as declared under international law) for at least three of the last five years. If you do not meet the residency requirement and you have been physically located in a foreign location for more than two of the last five years, you may request an exception to determine if you are eligible for a residency waiver by meeting one or more of the following conditions:

• Working for the U.S. Government as a federal civilian or as a member of the military
• A dependent who was authorized to accompany a federal civilian or member of the military who was working for the U.S. government
• Participation in a study abroad program sponsored by a U.S. affiliated college or university
• Working as a contractor, intern, consultant or volunteer supporting the U.S. government

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Applicants will only be considered for the Eligibilities for which they claim in the job questionnaire AND must provide the supporting documentation. Applicants will not be considered for Eligibilities for which they did not claim, regardless of the documentation submitted with the application https://apply.usastaffing.gov/ViewQuestionnaire/12737392.

We will review your resume and supporting documentation to ensure you meet the minimum qualification requirements. If you meet the minimum qualifications, your experience, education, and training will be rated using an assessment questionnaire.

This self-assessment will be used to assess the following competencies or KSAs:

• Knowledge of professional architectural or engineering concepts, principles, and practices regarding the planning, design, renovation, environmental assessment, and construction of basic facilities and structures.
• Ability to gather facts and observe and evaluate architectural, mechanical, electrical, civil, structural system functions.
• Ability to read and understand contract drawings and specifications for vertical and horizontal construction.
• Knowledge of construction-related disciplines such as architectural and mechanical, electrical, civil/structural, and environmental engineering.
• Knowledge of general engineering concepts typically acquired through a bachelor's degree program.

If you are best qualified, you may be referred to the hiring manager for consideration and may be contacted for an interview. As a part of the interview process, additional selection criteria may be administered by the hiring manager. Preview the job questionnaire https://apply.usastaffing.gov/ViewQuestionnaire/12737392.

Agency Career Transition Assistance Program (CTAP) Eligibles: If you have never worked for the federal government, you are not CTAP eligible. View information about CTAP eligibilityon OPM's Career Transition Resources website. You must submit the supporting documents listed under the Required Documents section of this announcement. To be considered well qualified under CTAP, you must be rated at a minimum score of 85 for this position.