Clarification from the agency

This is a Title 32 excepted position. This job announcement may be used to fill additional vacancies for additional positions vacated during the job bid process. IAW UTNGR 690-12 dated AUG 2022 and LIUNA-UTARNG CBA dated 11 OCT 2022, Priority will be given to all current, onboard employees of the UTNG.

Major Duties: This is not an all-inclusive list

As a ELECTRONIC MEASUREMENT EQUIP MECH (TITLE 32), WG-2602-10/11, you will:

• Calibrates and repairs TMDE within support capability and authority including various levels of calibration as designated in technical bulletins, manuals, etc.
• Performs functional electronic, physical, and radioactive testing involving interpretation and analysis of measurement data, in accordance with cyclic inspection requirements.
• Aligns, troubleshoots, tests, inspects, repairs, modifies, calibrates and certifies precision measurement equipment such as multimeters, microwave equipment, oscilloscopes, temperature analyzers, mercurial barometers, gage blocks and micrometer caliper dimensional equipment, digital voltmeters, signal generators, torque wrenches, pressure gauges, torque testers, weight scales, electronic counters, radiation monitors, radix calibrators, and radiation dosimeters.
• Sets up system test sets and various types of test equipment such as frequency meters, standing wave ratio meters, radio frequency (RF) power meters, function/ arbitrary waveform generator, distortion analyzers, time frequency work stations, oscillators, voltmeters, electronic counters, oscilloscopes, attenuators, decade resistors and capacitors, signal generators, stroboscope, tachometers, pneumatic and hydraulic pressure standards and other physical and electronic tests.
• Following repair, tests by applying signals in known amplitude and wave shape into oscilloscopes to observe wave pattern.
• Uses equipment schematics to analyze circuits by preparing block diagram showing major components such as amplifiers, filters, oscillators and indicators.
• Determines purpose in operation characteristics of each major section.
• Disassembles, cleans and inspects parts such as printed circuit boards, resistors, capacitors, integrated circuits, relays, chambers, cables, and wiring for evidence or wear or malfunction.
• Tests equipment for sensitivity and correct operation.
• Completes necessary Army Maintenance Management System (TAMMS), calibration, radiation reports and other records and forms on work completed.
• Follows appropriate safety procedures, with special care being exercised while calibrating high voltage, radio frequency, radioactive sources and high-pressure instruments and gages.
• Performs and interprets wipe tests on radiation sources for possibility of radiation hazards.
• Familiar with and abides by all Federal and State regulations concerning handling, transportation and disposal of radioactive waste or devices.
• Performs other duties as assigned.

Conditions of employment

Qualifications

*Your resume must reflect in detail how the duties and responsibilities under each position you have held with each employer meets the below listed general and specialized experience required for the position.

**Must include beginning and ending dates of employment stated as MM/YYYY; and total hours worked per week in order to determine part time vs. full time credit.

Minimum Requirements:
Experience or training which demonstrates a working knowledge of electronic principles involved in the generation and measurement of such elements as voltage, current, impedance, capacitance, frequency, and inductance. Experience in the use of various precision measurement instruments and standards.

Specialized Experience:
Have experience with basic application of operating principles such as the production and utilization of oscillations over a broad range of frequencies; signal and waveform behavior, distortion, and amplification; pulse, trigger, and synchronization techniques; digital/analog processing and data conversion techniques; and a variety of display and indication methods. Experience in tracing signals and voltage paths, and skilled in the analysis of waveform characteristics such as timing, duration, frequency, and phasing. Originates test set-ups to isolate malfunctions and check performance characteristics of special or unique test panels or mockups. Experience in interpreting and applying a variety of technical electronic information such as schematic symbols, mathematical expressions and formulas, calibration procedures, and other reference materials. Experience in applying established techniques and methods of repair, testing, alignment, and calibration of equipment, which serves as test equipment or precision measurement standards. Experience in utilizing electronic circuits to measure electronic or electrical quantities to determine the performance characteristics and accuracy of other instruments and equipment.

**Selecting supervisor will determine the hiring grade based on current skills**

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Category Rating: Your application will be evaluated and rated under Category Rating selection procedures. Once the application process is complete, a review of your qualifications will be conducted to determine if you are qualified for this job. Qualified candidates will be assigned to a quality category. The quality categories are:

1. Highly Qualified: Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements for this position.
2. Well Qualified: Candidates in this category possess good skills and experience above the minimum requirements for this position.
3. Qualified: Candidates in this category meet the minimum education and/or experience requirements for this position.

If your resume does not provide enough information regarding your work history for us to make a creditable qualification determination, your application package may be rendered disqualified, and you will no longer be considered for this position.

IN DESCRIBING YOUR EXPERIENCE, PLEASE BE CLEAR AND SPECIFIC. WE WILL NOT MAKE ASSUMPTIONS REGARDING YOUR EXPERIENCE. Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position. Your rating will be based on both your entire application package as well as the responses to the assessment questionnaire. Please follow all instructions carefully. Errors or omissions may affect your eligibility.

PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid work on the same basis as for paid experience. Part-time experience will be credited on the basis of time actually spent in appropriate activities. To receive credit for such experience you must indicate clearly the nature of the duties and responsibilities in each position held and the number of hours per week spent in such employment.