Clarification from the agency

This vacancy is open to CURRENT members of the Mississippi Air National Guard.

As a ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-12, you will inspect, test, troubleshoot, repair and modify software controlled automated and manually controlled test stations, ECM Pods, peripherals, support equipment and associated subsystems. The stations are used to repair and maintain all avionics line-replaceable units (LRUs) and Pods.

1. On a day-to-day basis, analyze performance, tests, inspects, troubleshoots, identifies and isolates malfunctions, disassembles, modifies or repairs and reassembles test stations or ECM Pods and their associated peripherals. Considers the complex interrelated variables arising from a mix of computer hardware and software, stimulus and measurement systems, and special purpose test subsystems. Analyzes malfunctions using schematics, logic and wiring diagrams, programming tables, computer program flow charts, software user guides, computer program listings and factory drawings. Diagnoses circuit operating characteristics using computer query, system peculiar test equipment, and computer diagnostics. Isolates problems to the failing part using self-test diagnostics, oscilloscopes, frequency meters, signal generators, digital, and differential voltmeters, computer registers and printouts and other special and standard tools and test equipment. Removes and replaces components, assemblies, subassemblies, or parts using special and common hand tools, soldering devices and special electronic instruments.

2. May modify and updates avionics Pods, support equipment and support software according to applicable technical publications. Analyzes program data and determines if the criteria is sufficient to provide adequate testing and troubleshooting. Examines recurring malfunctions and software deficiencies to determine testing voids and initiates corrective action by submission of quality deficiency reports, software deficiency reports or proposed modifications. Devises repair procedures based on findings and recommends program changes, procedural changes, or data corrections to correct software deficiencies. Recommends revisions to intermediate maintenance directives.

3. Connects associated testing equipment to interface the test station system to the aircraft system and or Pod to facilitate maintenance/repair of POD or line replaceable units (LRUs) from the avionics systems such as radar, fire control, instrument, flight control, inertial navigation, malfunction analysis and recording equipment systems. Determines whether failures are caused by the unit under test (UUT), the Pod, the test station, or the test program. If the malfunction is found to be in the UUT, Pod or the test station, isolates it to the specific component(s), disassembles and effects repair by replacing solid state devices, micro miniature modules, gyros, sensors, transducers, and any other required parts, and assembles after repair is accomplished and performs operational tests. If the malfunction is in the test program, informs engineers and/or Air Force Logistics Command (AFLC) of the problem and serves as subject matter expert in providing practical technical assistance in resolution. Ensures compatibility of items with each other and with extenders and interfaces.

4. Works with engineers and technicians in the development and/or modification of software, interfaces, extender equipment or additional items of test equipment and in validation of technical data concerning the repair, maintenance, and test of the test station and units under test. Initiates technical data changes. Suggests means by which a component or system can be tested more economically or thoroughly and provides practical technical assistance by explaining peculiarities of the program or assemblies of the test station, UUT, interfaces, extenders, test procedures, etc.

5. Provides hands-on training instructions to lower grade personnel concerned with repair of computer controlled automatic test equipment, manually controlled test equipment, line replaceable units and aircraft integrated systems. Also provides on-the-job instruction to newly assigned personnel, regardless of grade level. Prepares for and participates in various types of readiness evaluations such as Operational Readiness Inspections (ORI), Inspector General (IG) inspections, and Unit Effectiveness Inspections and mobility and command support exercises.

Performs other duties as assigned.

Conditions of employment

MILITARY REQUIREMENTS:

Military Grades: E3 - E5

CONDITIONS OF EMPLOYMENT & NOTES:

1. Must be able to obtain and maintain the appropriate security clearance of the position.

2. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.

3. Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.

4. May occasionally be required to work other than normal duty hours; overtime may be required.

5. The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.

6. Wear of the military uniform is MANDATORY.

7. Participation in direct deposit is mandatory.

8. For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license.

Qualifications

If your resume does not include a narrative description of how you meet the GENERAL, SPECIALIZED experiences, and OTHER requirements, you may lose consideration for this position. Ensure that the Questionnaire is completed online in Application Manager.

GENERAL EXPERIENCE: Must possess experience or training which demonstrates knowledge inspecting, testing, troubleshooting, repairing and modifying software controlled automated and manually controlled test stations, electronic circuit maintenance pods, peripherals, support equipment and associated subsystems. Knowledgeable of stations that are used to repair and maintain all avionics line-replaceable units and pods. Skilled in analyzing performance, running tests, conducting inspections, troubleshooting, identifying and isolating malfunctions, disassembling, modifying or repairing and reassembling the test stations or electronic circuit maintenance pods and their associated peripherals. Skilled in reading the complex inter-related variables that resulted from a mix of computer hardware and software, stimulus and measurement systems, and special purpose test subsystems.

SPECIALIZED EXPERIENCE: Must possess at least a three-skill level in one of the compatible AFSCs, with 12 months of work experiences in analyzing malfunctions using schematics, logic and wiring diagrams, programming tables, computer program flow charts, software user guides, computer program listings and factory drawings. Skilled in diagnosing circuit operating characteristics using computer query, system peculiar test equipment, and computer diagnostics. Experienced in isolating problems to the failing part using equipment such as, self-test diagnostics, oscilloscopes, frequency meters, signal generators, digital, and differential voltmeters, computer registers and printouts and other special and standard tools and test equipment. Competent in removing and replacing components, assemblies, sub-assemblies, or parts using special and common hand tools, soldering devices and special electronic instruments. Experiences involved modifying and updating avionics pods; or, support equipment and support software according to applicable technical publications. Competent to analyze program data and determined if the criteria are sufficient to provide adequate testing and troubleshooting. Skilled in examining recurring malfunctions and software deficiencies and determined testing voids and initiated corrective action by submitting quality deficiency reports, software deficiency reports, or proposed modifications. Experiences included connecting associated testing equipment to interface the test station system to the aircraft system and pod; facilitated maintenance and repair of pod or line replaceable units from the avionics systems such as radar, fire control, instrument, flight control, inertial FWS navigation, malfunction analysis and recording equipment systems. Competent in determining if failures are caused by the unit under test. Skilled to identify a malfunction and isolated it to the specific component(s). Skilled in the task of disassembling and repairing or replacing solid state devices, micro miniature modules, gyros, sensors, transducers, and any other required parts; followed by the reassembly and performed operational tests. Experiences may have included the identification of test program malfunctions and informing engineers and/or Air Force Logistics Command of the problems. Experienced in the development and/or modification of software, interfaces, extender equipment, or additional items of test equipment or completed work in validating technical data concerning the repair, maintenance, and test of the test station and units under test. Competent in processing and accounting for due-in-from-maintenance supply assets. Skilled in documenting maintenance repair actions and man-hour accounting on maintenance forms and computer systems. Skilled in maintaining historical data of repaired components and of the test stations. Skilled in complying with safety, fire, security, and housekeeping regulations. Experienced in the procedures involved with the proper storage, protection, and maintenance of all work-related material and equipment.

If your resume does not include a narrative description of how you meet the GENERAL, SPECIALIZED experiences, and OTHER requirements, you may lose consideration for this position. Ensure that the Questionnaire is completed online in Application Manager.

NOTES TO CANDIDATES:
a. Situations of inversion of military rank are not permitted, i.e., a military technician may not be militarily senior to his or her full-time supervisor.

b. Candidates may be screened and evaluated on military attributes directly related to the compatible military position required to be assigned into, such as, but not limited to, military bearing, leadership, or ability to work with others (teamwork) in a military environment.

c. Include any volunteer work experience in your resume. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social).

d. Final selection will be based upon qualifications, suitability, and available manpower resources.

e. This employer will provide the Social Security Administration (SSA) and if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization.

f. Multiple vacancies may be filled from this announcement.

g. If this announcement results in a temporary promotion for the selectee, it may become permanent at any time without further competition dependent on funding and manpower requirements.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.