Skip to main content
U.S. flag
Back to results

CIVIL ENGINEER

Department of the Army
U.S. Army Corps of Engineers
Rock Island Engineering and Construction Division; Design Banch
This job announcement has closed

Summary


About the Position:
This position is in the Engineering and Construction Division Design Branch. Position will work under section chief as project engineer for civil works projects; preparation of technical reports, final design for plans and specification products, and engineering during construction activities. Position requires coordination with internal and external stakeholders and leadership at the project development team level.

This is a Direct Hire Authority (DHA) solicitation.

Overview

Help
Job canceled
Open & closing dates
09/24/2024 to 10/15/2024
Salary
$73,696 to - $114,827 per year
Pay scale & grade
GS 11 - 12
Location
1 vacancy in the following location:
Rock Island, IL
Remote job
No
Telework eligible
Yes—as determined by the agency policy.
Travel Required
25% or less - You may be expected to travel up to 25% of the time for business (TDY) for this position.
Relocation expenses reimbursed
Yes—You may qualify for reimbursement of relocation expenses via an incentive ln accordance with agency policy.
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
12
Job family (Series)
Supervisory status
No
Security clearance
Not Required
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Financial disclosure
No
Bargaining unit status
No
Announcement number
CERG244372394908HWS
Control number
810955600

Videos

Duties

Help
  • Serve as project engineer, planning and coordinating civil works projects from design memorandum through final design.
  • Review completed drafts of design memoranda and final plans for technical accuracy.
  • Prepare various engineering documents such as design memoranda, contract plans, and as-built drawings.
  • Provide direction to lower-graded engineers/technicians throughout the design process based on grade and experience.
  • Assign and coordinate work to a multidisciplinary team to assure maximum efficiency.
  • Serve as a liaison between the District Office and architect-engineers hired to develop designs for projects.
  • Coordinate with various divisions within the District to ensure projects remain on schedule.
  • Serve as project engineer; lead or participate in planning and coordinating civil works projects from project scoping through final construction scope.

Requirements

Help

Conditions of employment

  • Must have Professional Engineer (PE) license to be considered for employment at the GS 12 level. Candidate must attach a copy of their license.
  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • Must possess a valid State motor vehicle operator's license for the class of vehicle being operated based on site specific, job related requirements, and must maintain this license.
  • Must complete a one year probationary period.

Qualifications

Who May Apply: US Citizens

In order to qualify, you must meet the education an/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.


Specialized Experience GS11: One year of specialized experience which includes assisting with the review of engineering design plans and/or specifications for accuracy; preparing design features for civil works projects, such as contract plans, specifications, and as-built drawings; and collaborating with personnel from various organizations to complete assigned projects. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).
OR
Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering.
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.
Specialized Experience GS 12: One year of specialized experience which includes independently reviewing engineering design plans and/or specifications for accuracy; independently preparing design features for civil works projects, such as contract plans, specifications, and as-built drawings; provide technical guidance on design memoranda and final plans prepared; and serving as project manager or technical lead on engineering projects. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).

The position will be filled at the GS-11/12 grade level, with non-competitive promotion potential to the GS-12 if selected at the GS-11.
You will be evaluated on the basis of your level of competency in the following areas:

Education

Basic Requirement for Civil Engineer (0810 Series):A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.ORB. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided that the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed :above.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • One year trial/probationary period may be required.
  • If you are a current federal employee duty located 50 miles or more outside of the area for this recruitment, you may be considered for a relocation incentive.
  • If you are new to federal service and meet the criteria, you may be considered for a recruitment incentive. This incentive option is not applicable to current federal employees.
  • PCS expenses not authorized
  • Direct Deposit of Pay is required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a Career Program (CP) 18 - Engineers and Scientists (Resources and Construction) position.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • Information may be requested regarding the vaccination status of selectees for the purposes of implementing workplace safety protocols. For more information, visit https://www.saferfederalworkforce.gov/faq/vaccinations/.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared against your responses to the assessment questionnaire to determine your level of experience. If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.

Basis for Rating: Qualified candidates will be assigned to one of three quality categories: Best Qualified, Highly Qualified and Qualified. Veteran preference eligibles are listed ahead of non-preference eligibles within each quality category.

  • Best Qualified. Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements for the announced position.
  • Highly Qualified. Candidates in this category possess good skills and experience above the minimum requirements for the announced position.
  • Qualified. Candidates in this category meet the minimum experience requirements for the announced position.




Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.