Skip to main content
U.S. flag
Back to results

Deputy Director US Army Engineer Research and Development Center

Department of the Army
U.S. Army Corps of Engineers
This job announcement has closed

Summary

See below

Overview

Help
Hiring complete
Open & closing dates
07/30/2024 to 08/20/2024
Salary
$147,649 to - $221,900 per year

Salary for a Tier 1 position in the Army is normally between $193,819 and $204,000

Pay scale & grade
ES 00
Location
1 vacancy in the following location:
Vicksburg, MS
Remote job
No
Telework eligible
Yes—as determined by the agency policy.
Travel Required
Occasional travel - You may be expected to travel for this position.
Relocation expenses reimbursed
Yes—You may qualify for reimbursement of relocation expenses in accordance with agency policy.
Appointment type
Permanent
Work schedule
Full-time
Service
Senior Executive
Promotion potential
None
Supervisory status
Yes
Security clearance
Sensitive Compartmented Information
Drug test
Yes
Position sensitivity and risk
Critical-Sensitive (CS)/High Risk
Trust determination process
Financial disclosure
No
Bargaining unit status
No
Announcement number
DA-24-RJK-12494185
Control number
802271400

Duties

Help

Serves as Deputy Director of ERDC, sharing responsibility for planning and conducting the technical research program necessary for accomplishment of the ERDC mission, which involves activities throughout the nation and at various overseas locations. Serves under the general direction of and receives broad strategic guidance from the ERDC Director and provides the senior civilian perspective and continuity of leadership to the workforce and stewardship of technical excellence. The emphasis is on both the appropriateness and quality of technical programs; in addition, sound business acumen is required for management of financial, material, information, and laboratory resources. Is actively concerned with the maintenance, development, and improvement of the stature of the ERDC as a scientific organization of national and international repute; its efficiency of operations, and use of the best available knowledge and resources; and its improvement and advancement of knowledge in assigned fields of work. Technical functions encompass oversight of basic and applied research, development, engineering, test and evaluation, post-deployment support, special technical support, and operational programs in support of USACE, Army, DoD, and the Federal government in accomplishing missions important to the national defense and well-being. Shares responsibility for advising and assisting the Commander, USACE on R&D initiatives and by supporting USACE's continuing objective of developing and maintaining a world-class scientific and engineering capability. Provides policy guidance for development, execution, and implementation of all R&D conducted by USACE. Develops and defends R&D investment strategy and provides execution oversight. Interfaces with Army, DoD, other services, a wide range of government agencies, and other national and international technology development and user groups. Formulates and interprets legislative initiatives relating to technology development and implementation requirements for both existing and emerging missions. Principal R&D mission areas include civil engineering, environment, water resources engineering, and the physical sciences as they relate to the USACE military and Civil Works missions. Civil engineering comprises conventional facilities, airfields and pavements, survivability and protective structures, and sustainment engineering. Environment comprises all aspects of environmental quality to include restoration, compliance, conservation, pollution prevention (relating to facilities operation), and regulatory functions related to navigable waters. Water resources comprise major Civil Works business areas such as flood control, navigation recreation, and hydropower. Physical sciences comprise topography, mapping, geospatial data management and application, winter and severe climatic conditions, oceanography, and the impact of environmental conditions on systems and operations. An overarching area is the exploitation of information technology to include direction of one of the DoD Major Shared Resource High Performance Computing Centers.

Requirements

Help

Conditions of employment

CONDITIONS OF EMPLOYMENT:
You must be a U.S. citizen to be eligible for this position.
You must be able to submit and pass designated and/or Random Drug Testing as required.
You must sign a mobility agreement.
You must be able to obtain/maintain the appropriate clearance and access level for this position.
Information may be requested regarding the vaccination status of selectees for the purposes of implementing workplace safety protocols. For more information, visit https://www.saferfederalworkforce.gov/faq/vaccinations/

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • One year trial/probationary period may be required. You will serve a one-year probationary period unless you have previously completed the probationary period in the SES.
  • Appointment is subject to the completion of a favorable suitability or fitness determination, as determined by a background investigation.
  • Direct deposit of pay is required.
  • This position requires you to submit a Public Financial Disclosure Report (OGE 278) upon entry, and annually thereafter.
  • The incumbent is required to travel on both scheduled and unscheduled aircraft, and other modes as required, under conditions specified under the DoD Joint Travel Regulations.
  • The incumbent is expected to travel on short notice to attend high level meetings to obtain resolution of problems and gather information to assist in the decision-making process.
  • Mobility: An essential element of the SES is mobility across geographic, organizational and functional lines. Individuals selected for Army SES positions may be subject to reassignment that requires them to be mobile. The U.S. Army senior leadership considers mobility to be an integral part of employment as an SES member with the Department of the Army.

Qualifications

**To meet the minimum qualification requirements for this position, you must show that you possess the five Executive Core Qualifications (ECQs), Technical Qualification(s), and other qualifications, if applicable (such as Education - see below). Additional information on ECQs is available at http://www.opm.gov/ses/recruitment/ecq.asp.

(1) Mandatory Executive Core Qualification (MANDATORY SUBMISSION) (ECQ)

All applicants must submit written statements (narrative format) describing accomplishments that would satisfy the ECQs. Use the Challenge-Context-Action-Result (CCAR) Model to describe your accomplishments. You must address each ECQ separately. You are required to respond to all ECQs. Failure to do so, will result in an 'ineligible' rating. Each accomplishment should be clear, concise, and emphasize your level of responsibilities, the scope and complexity of programs managed, and results of your actions. Total ECQ write-up should not exceed 10 pages using 12pt, Arial or Times New Roman with 1-inch margins.

Please Note: Current career SES members, former career SES members with reinstatement eligibility, and SES Candidate Development Program (CDP) graduates, who have been certified by the OPM do not need to address ECQs. However, Current or Former SES members must provide an SF-50 showing their status or reinstatement eligibility and Candidates who have successfully graduated from an OPM approved Candidate Development Program must submit a copy of their ECQ certification.

ECQ 1 - Leading Change: This core qualification involves the ability to bring about strategic change, both within and outside the organization, to meet organizational goals. Inherent to this ECQ is the ability to establish an organizational vision and to implement it in a continuously changing environment.

ECQ 2 - Leading People: This core qualification involves the ability to lead people toward meeting the organization's vision, mission, and goals. Inherent to this ECQ is the ability to provide an inclusive workplace that fosters the development of others, facilitates cooperation and teamwork, and supports constructive resolution of conflicts.

ECQ 3 - Results Driven: This core qualification involves the ability to meet organizational goals and customer expectations. Inherent to this ECQ is the ability to make decisions that produce high-quality results by applying technical knowledge, analyzing problems, and calculating risks.

ECQ 4 - Business Acumen: This core qualification involves the ability to manage human, financial, and information resources strategically.

ECQ 5 - Building Coalitions: This core qualification involves the ability to build coalitions internally and with other Federal agencies, State and local governments, nonprofit and private sector organizations, foreign governments, or international organizations to achieve common goals.

(2) MANDATORY TECHNICAL QUALIFICATION(S) (TQ): (MANDATORY SUBMISSION) A supplemental statement must be submitted separately addressing each TQ. Your TQ must provide specific examples that address relevant experience and accomplishments. Total TQ write-up should not exceed 2 pages per TQ using 12pt, Arial or Times New Roman with 1-inch margins. Applicants must reflect superior technical qualifications demonstrated through leadership and management in the following:

TQ 1- I possess the ability to formulate and direct policy that applies to a broad program of research, development, test, evaluation, and special technical support across a large, multi-disciplinary organization related to assessing, analyzing, predicting, and developing solutions through science and engineering.

Education

Education Basic Requirements:

A. Degree: physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics.

or

B. Combination of education and experience -- education equivalent to one of the majors shown in A above that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education.

or

C. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

or

D. Combination of education and experience -- college-level education, training, and/or technical experience that furnished
(1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1.Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) 2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph C.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html.

Additional information

  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • Veteran's Preference: By law Veteran's Preference does not apply to the Senior Executive Service.
  • False Statements: If you make a false statement in any part of your application, you may not be hired; you may be fired after you begin work; or you may be subject to fine, imprisonment, or other disciplinary action.
  • Non Discrimination: All applicants will be considered without regard to race, color, religion, national origin, marital status, political affiliation, age, sex, sexual orientation, disabling condition, membership in an employee organization, or any other non-merit factors.
  • Adverse Information Screening: Applicants proposed for selection are subject to inquiries as to any incidences of misconduct, malfeasance, neglect of duty, or the appearance thereof. Information gained in this check will be considered in the approval decision.
  • E-verify: If you are selected for this position, the documentation that you present for purposes of completing the Department of Homeland Security (DHS) Form I-9 will be verified through the DHS "E-Verify" system. Federal Law requires DHS to use the E-Verify system to verify the employment eligibility of all new hires, and obligates the new hire to take affirmative steps to resolve any discrepancies identified by the system as a condition of continued employment. The U.S. Department of Army is an E-Verify Participant.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

You will be evaluated on the quality and extent of your total accomplishments and experience.
Your resume will be evaluated by an SES rating and ranking panel, and afterwards, highly qualified candidates will undergo the Structured Interview process.
The Executive Resources Board (ERB) will review results and make recommendations on final selections to the appointing authority where final interviews and reference checks may occur.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.