Skip to main content
U.S. flag
Back to results

Lead Mechanical Engineer

Department of the Army
U.S. Army Corps of Engineers
South Pacific Division, Albuquerque District, Engineering & Construction Division, Design Branch
This job announcement has closed

Summary

About the Position: Serve as Albuquerque District senior specialist and team leader in mechanical design. Serve as the District's mechanical engineering design and construction expert.

Note: Recruitment incentives, including student loan repayment, may be offered to highly qualified candidates.

First cut off date will be 15-July-2024. Additional list will be issued as needed.

Overview

Help
Reviewing applications
Open & closing dates
06/17/2024 to 12/31/2024
Salary
$115,079 to - $141,638 per year
Pay scale & grade
GS 13
Location
1 vacancy in the following location:
Albuquerque, NM
Remote job
No
Telework eligible
Yes—as determined by the agency policy.
Travel Required
Occasional travel - You will be expected to travel up to 20% for this position.
Relocation expenses reimbursed
Yes—Relocation Expenses or Permanent Change of Station (PCS) MAY be authorized subject to the provisions of the Joint Travel Regulations
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
None
Job family (Series)
Supervisory status
No
Security clearance
Not Required
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Announcement number
CERI248245639525HWS
Control number
796075600

This job is open to

Help

Clarification from the agency

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA to recruit and appoint qualified candidates to positions in the competitive service.

Videos

Duties

Help
  • Analyze and design the more sophisticated and technically challenging features of District projects. Provide authoritative advice and guidance to key staff.
  • Review and have final approval authority over all mechanical engineering features designed by junior and senior Mechanical Engineers within the District and serve as first level reviewer of designs prepared by A-E Mechanical Design Engineers.
  • Lead the mechanical team and is responsible for coaching, facilitating and communicating team objectives, mission, goals, problems to be solved, techniques, work methods, procedures and identification of parameters of a viable solution.
  • Participate in conferences with representatives of using services, military installation representatives, SPD, HQUSACE, District, A-E firms, non-Federal project sponsors, and other interested parties.
  • Maintain awareness of current advances in mechanical design. Perform special studies of alternative mechanical systems.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • This position has a Temporary Duty (TDY) or business travel requirement of 20% of the time.

Qualifications

Who May Apply: US Citizens

In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Requirement for Lead Mechanical Engineer:
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

-OR-

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

Specialized Experience: One year of specialized experience which includes planning and designing all mechanical design features of new construction, renovation or improvement projects; reviewing design calculations, analyses, and drawings/specifications; AND negotiations and administration of Construction and/or Architect-Engineer (A-E) contracts. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12).

This position requires a Professional Engineer (PE) license. (A copy of your license must be submitted as a part of your application package).

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • One year trial/probationary period may be required.
  • Direct Deposit of Pay is required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • Eligible for Situational Telework
  • This is a(n) Engineers & Scientists Career Field position.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction.htm for more information.
  • Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.
  • Recruitment incentives, including student loan repayment, may be offered to highly qualified candidates.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.

Veterans and Military Spouses will be considered along with all other candidates.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.