Skip to main content
U.S. flag
Back to results

Electrical Engineer - Direct Hire

Department of the Army
U.S. Army Corps of Engineers
Portland District, Operations Division, Willamette Valley Project
This job announcement has closed

Summary

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Candidates with Advanced Degrees for Scientific and Engineering Positions to recruit and appoint qualified candidates to positions in the competitive service.

Overview

Help
Hiring complete
Open & closing dates
05/31/2024 to 06/14/2024
Salary
$103,507 to - $136,466 per year
Pay scale & grade
GS 11 - 12
Locations
Eugene, OR
1 vacancy
Foster, OR
1 vacancy
Lowell, OR
1 vacancy
Mill City, OR
1 vacancy
Remote job
No
Telework eligible
Yes—as determined by the agency policy.
Travel Required
Occasional travel - You may be expected to travel for this position to attend training.
Relocation expenses reimbursed
Yes—You may qualify for reimbursement of relocation expenses in accordance with agency policy. Moving expenses will be paid in accordance with the joint travel regulations.
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
12
Job family (Series)
Supervisory status
No
Security clearance
Not Required
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Announcement number
CERH240274117886HL
Control number
793656100

Videos

Duties

Help
  • Troubleshoot unusual circumstances, locate problems, formulate plans of action, develop precedents, identify and define requirements, design new or modifications.
  • Analyze complex electrical engineering problems and develop cost-effective and viable solutions.
  • Evaluate alternatives, considering all factors such as: technical, environmental, fisheries, and economic concerns; and recommend best course of action.
  • Design modifications to existing power generation systems.
  • Integrate state-of-the-art technology into the evaluation of existing power generation systems.
  • Design, specify, and direct installation of digital and analog equipment to control all dam systems.
  • Provide technical support for the Data Acquisition and Control system for software and hardware.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • Appointment to this position is subject to a background investigation to determine your suitability for Federal employment.
  • The duties of this position require the incumbent to possess or obtain and maintain a valid state Driver's License in one of the 50 U.S. states or possessions to operate vehicles.
  • Appointment to this position is subject to a one year probationary period unless the appointee has previously met the requirements as described in 5 CFR Part 315.
  • This position has a Temporary Duty (TDY) or business travel requirement of 5% of the time.

Qualifications

About the Position: In this position you will serve as technical expert at a multi-purpose hydroelectric facility in the Engineering and Contracts Section. You will be responsible for a variety of functions in support of a large hydropower plant, and fish passage systems.Foster/Mill City Salary Range (SSR 0754): $103,507 - $136,466 Eugene/Lowell Salary Range (SSR 0755): $97,297 - $124061.

Who May Apply: US Citizens

In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.


Basic Requirement for an Electrical Engineer:

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience:
College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

Specialized Experience:
One year of specialized experience which includes modifying designs for electrical systems and generating cost estimates. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • One year trial/probationary period may be required.
  • Direct Deposit of Pay is required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a(n) Construction, Engineering, Infrastructure Career Field position.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction.htm for more information.
  • Payment of Permanent Change of Station (PCS) costs is authorized, subject to the provisions of the Joint Travel Regulations.
  • Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.
  • Student Loan Repayment maybe authorized.
  • Advanced In-Hire maybe authorized.
  • Relocation Incentive maybe authorized.
  • Recruitment Incentive maybe authorized.
  • Advanced Leave Accrual maybe authorized.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.

You may claim Priority Placement Program (PPP) preference.

DoD Priority Placement Program (PPP) Applicants will receive preference consideration at the full-performance grade level only.

Only PPP applicants currently occupying a formal training program position are entitled to exercise their priority status.

Veterans and Military Spouses will be considered along with all other candidates.?

Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.