Skip to main content
U.S. flag
Back to results

INTERDISCIPLINARY

Department of the Army
U.S. Army Corps of Engineers
Southwestern Division (SWD) - Ft. Worth District - Regional Planning and Environmental Center
This job announcement has closed

Summary

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service.

About the Position: This is an Interdisciplinary, GS-XXXX-12 position with the U.S. Army Corps of Engineers, Ft. Worth District, Regional Planning and Environmental Center located in one of the four primary duty stations: Fort Worth, TX; Galveston, TX; Little Rock, AR; or Tulsa, OK.

Overview

Help
Hiring complete
Open & closing dates
04/24/2024 to 05/06/2024
Salary
$86,962 to - $130,369 per year
Pay scale & grade
GS 12
Locations
3 vacancies in the following locations:
Little Rock, AR
Tulsa, OK
Fort Worth, TX
Galveston, TX
Remote job
No
Telework eligible
Yes—as determined by the agency policy.
Travel Required
25% or less - You may be expected to travel for this position.
Relocation expenses reimbursed
Yes—You may qualify for reimbursement of relocation expenses in accordance with agency policy.
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
None
Supervisory status
No
Security clearance
Not Required
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Announcement number
CERK249838933890HW
Control number
788260100

Videos

Duties

Help
  • Serve as the Project Manager, responsible for the overall management, control, coordination and execution of assigned projects.
  • Implement corporate decisions, guidance, laws regulations, and policy in the development of the project and intermediate products in support of the project.
  • Manage and balance all of the competing interests and requirements that results from these multiple stakeholders and requirements in order to keep the assigned projects in line with organizational commitments.
  • Provide office and field administration; technical support; continuing review; and end product evaluation of work performed (including A-E open-end contracts).
  • Assure early identification of customer problems or issues, including funding, and facilitates the resolution of identified problems or issues in the most appropriate manner.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • Incumbent may be required up to 25% for TDY.
  • Appointment to this position is subject to a one-year probationary period unless the appointee has previously met the requirements as described in 5 CFR Part 315.
  • Incumbent is required to submit a Financial Disclosure Statement, OGE-450, (5CFR Part 2634, Subpart I USOGE, 6/08).

Qualifications

Who May Apply: US Citizens

In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

BASIC EDUCATION REQUIREMENTS:

Biologist (0401):
A. Degree: Bachelor's degree (or higher degree) in biological sciences, agriculture, natural resource management, chemistry, or related disciplines appropriate to the position.

OR

B. Combination of Education and Experience: Courses equivalent to a major, as shown in A above, plus appropriate experience or additional education.

General Engineer (0801)/Environmental Engineer (0819)/Chemical Engineer (0893):
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Physical Scientist (1301):
A. Degree: Bachelor's degree (or higher degree) in physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics.

OR

B. Combination of Education and Experience: Courses equivalent to one of the majors, as shown in A above, that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education.

Chemist (1320):
A. Degree: Bachelor's degree (or higher degree) in the physical sciences, life sciences, or engineering that included 30 semester hours in chemistry, supplemented by course work in mathematics through differential and integral calculus, and at least 6 semester hours of physics.

OR

B. Combination of Education and Experience: Course work equivalent to a major in the physical sciences, life sciences, or engineering, including at least 30 semester hours in chemistry, supplemented by mathematics through differential and integral calculus, and at least 6 semester hours of physics, plus appropriate experience or additional education.

Geologist (1350):
A. Degree: Bachelor's degree (or higher degree) in geology, plus 20 additional semester hours in any combination of mathematics, physics, chemistry, biological science, structural, chemical, civil, mining or petroleum engineering, computer science, planetary geology, comparative planetology, geophysics, meteorology, hydrology, oceanography, physical geography, marine geology, and cartography.

OR

B. Combination of Education and Experience: Course work as shown in A above, plus appropriate experience or additional education.(Note:Acceptable experience may have been gained through geological field or laboratory work that provided a means of obtaining professional knowledge of the theory and application of the principles of geology and closely related sciences, e.g., geophysics, geochemistry, or hydrology. Such work generally must have involved making close observations, taking samples, handling various types of instruments and equipment, assembling geologic data from source materials, and analyzing and reporting findings orally and in writing. In some situations, professional scientific experience in other fields may be accepted in part as professional geological experience. Such experience must have been preceded by appropriate education in geology or by professional geological experience, and must have contributed directly and significantly to the applicant's professional geological competence. To receive credit for geological experience obtained in positions that are not full-time professional geological positions, the applicant is responsible for indicating clearly the actual time or percentage of time devoted to geologic duties within such positions, and for giving adequate descriptions of the geologic functions.)

Specialized Experience: 1) Administering contracts for environment compliance and remediation services; AND 2) Providing project management and/or technical management for environmental projects. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • One year trial/probationary period may be required.
  • Direct Deposit of Pay is required.
  • This position requires you to submit a Public Financial Disclosure Report (OGE 278) or a Confidential Financial Disclosure Report (OGE450) upon entry, and annually thereafter.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is an Engineers & Scientists (Non-construction) Career Field position.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.

Veterans and Military Spouses will be considered along with all other candidates.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.