Clarification from the agency

(1) Arkansas Air National Guard (AR ANG) Technicians; (2) All members of the AR ANG, (3) Individuals who are not members of the National Guard but who are eligible to acquire membership in an available and compatible military grade for excepted technician positions. (Upon selection, must be a member of the AR Air National Guard).

(1) Manages a complex, highly technical environmental management and protrection program and serves as the installation's single most knowledgeable expert on DoD, AF, ANG, EPA state specific environmental laws and regulations. Environmental Management duties and responsibilities include, but are not limited to: (1) Hazardous Waste Management; (2) Storm Water Management and Control; (3) Air Quality; (4) Water Quality; (5) Pollution Prevention; (6) Green Procurement; (7) Environmental Restoration Program (ERP); (8) Cultural and Natural Resources Management; (9) Spill Prevention and Response; (10) Environmental Management System; (11) Environmental Impact Analysis Program (EIAP) Management; and (12) Qualified Recycling Program Management.

(2) Manages the entire Planning, Programming, Budget and Execution (PPB&E) for the installation's environmental quality (EQ) program area. Additional budgetary responsibilities may include working with the Defense Logistics Agency (DLA) Energy and Environment for recurring environmental costs related to DLA owned fuel systems. Provides financial analysis and planning for Environmental resource requirements, to include planning, programming and execution. Plans, budgets, and reports environmental financial information regarding the environmental programs through directed financial databases.

(3) Manages Environmental Planning aspects of the program.

(a) Prepares and guides implementation of environmental program plans. Environmental program plans include, but are not limited to (1) Spill Prevention Control and Countermeasures (SPCC) Plan; (2) Storm Water Pollution Prevention Plan (SWPPP); (3) Hazardous Waste Management Plan (HWMP); (4) Air Emissions Inventory (AEI); (5) Green Procurement Plan (GPP); (6) Integrated Pest Management Plan; (7) Refrigerant Management Plan; (8) Cultural or Natural Resources Management Plans; (9) Environmental Management System (EMS) Plans; and (10) Integrated Solid Waste Management Plan.

(b) Serves as an active member of the installation Design Working Group (DWG) and/or Facilities Utilization Board (FUB) accomplishing short term and long range planning in conjunction with Civil Engineering for future military construction and renovation projects. Responsible for ensuring all necessary environmental permits for related construction projects are obtained and necessary plans developed and implemented.

(c) In accordance with the Environmental Impact Analysis Process (EIAP) statutory requirements, the incumbent is responsible for evaluating the environmental impact of construction and renovation projects. Facilitates the decision making process ensuring due consideration is given to the natural environment, social, political, economic, and governance factors and provides a holistic frame work designed for the achievement of sustainable outcomes.

(4) Performs other duties as assigned.

Conditions of employment

NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.

Compatible military grade and assignment required prior to the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership in the military grade listed below. Selectee will be required to wear the military uniform.

Military Grades: Officer

• Minimum Military Grade: O-1/2Lt
• Maximum Military Grade: NTE O-4/Maj
• Enlisted (This is a commissioning opportunity for enlisted airmen. The airman MUST meet the requirements to commission as an Air Force Civil Engineer Officer)

Compatible Military Assignments: Selectee must be a member of the Arkansas Air National Guard and be assigned to the 189th AW in a compatible military position in Air Force Specialty Code (AFSC) 32EXX. Must become compatible in the AFSC within 12 months of appointment.

IMPORTANT NOTES (AS APPLICABLE): Upon selection for this position, individual must possess or initiate a National Agency Check with Inquiries (NACI) background investigation. A favorable determination based upon investigative results is mandatory for this position. Failure to meet these requirements will result in termination of employment. A pre-placement physical is required if not already current. Upon selection, must complete mandatory Full-Time Support (FTS) Training at the Professional Education Center (PEC) within six months of assignment (if applicable, training will be coordinated by the supervisor). Individual must meet all military requirements of the position without creating a grade inversion, as determined by the Human Resources Office (HRO). Technicians will not be militarily senior to their full-time supervisor or wage leader (Grade Inversion). Enlisted members currently at a higher grade than allowed by the position (see Military Grade Requirement above) may apply; however, they must administratively reduce prior to appointment and provide confirmation of the reduction to HRO.

ADDITIONAL REQUIREMENTS ARE LISTED UNDER ADDITIONAL INFORMATION.

Qualifications

GENERAL EXPERIENCE:

Degree: professional engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

If determining basic qualification requirements on a Combination of education and experience, use the Office of Personnel Management Individual Occupational Requirements Paragraph B and add the following 2 subparagraphs under Paragraph B 2 for this Series.

B. 2. 1. "Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A."

B. 2. 2. "Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination."

Functional Manager Selective Factor - Professional Registration:

Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Engineer intern and engineer in training does not meet the selective factor professional registration requirement.

SPECIALIZED EXPERIENCE:

Must have 1-year equivalent to at least next lower grade level experience, education, or training for management, supervision, or performance of (1) planning, designing, construction, and/or maintaining structures and facilities; and (2) investigating, measuring, surveying, and mapping the earth's physical features.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities, general and specialized experience):

Professional knowledge and abilities applicable to a wide range of environmental engineering duties; and the skill to modify standard practices and adapt equipment or techniques to solve a variety of problems; adapt precedents or make significant departures from previous approaches to similar projects to provide for the specialized requirements of projects; and apply standard practices of related engineering disciplines as they relate to environmental engineering functions. In depth knowledge of environmental sciences and related disciplines, the effect of actions and technology on the environment, the means of preventing or reducing pollution, and the relationship between environmental factors and human health and well-being. Comprehensive knowledge of Environmental Protection Programs that involve federal/state compliance procedures and standards associated with pollution prevention, hazardous waste management/minimization, recycling and environmental impact. Substantial knowledge of contract administration to negotiate and provide technical oversight, monitor vendor performance, and ensure compliance with terms of contract. Systematic skill in planning, organizing, directing, coordinating, operating, and evaluating Installation Environmental programs. Detailed knowledge of analytical and evaluative methods and procedures, and skill in evaluating related operations sufficient to analyze standards, procedures, and work processes to continually improve them to meet customer requirements and to ensure compliance with regulatory provisions. Knowledge of and skill in applying basic budgetary policies and procedures to provide a financial analysis of environmental resource requirements. Comprehensive working knowledge of pertinent laws, regulations, policies, and precedents affecting the Installation Environmental Management Program to include federal/state/local/DoD/AF/ANG requirements. All-inclusive working knowledge of installation Environmental Management roles and responsibilities, and the ability to recognize the need for and to develop local guidelines/instructions to meet the specific installation needs. Competent command of oral and written communications to prepare and present briefings/project papers, and staff reports; coordinate planning efforts; and manage programming activities, to effectively communicate requirements with staff and line personnel to encourage understanding and acceptance of findings and recommendations, and to negotiate with high-level civil and military executives.