Skip to main content
U.S. flag
Back to results

Civil Engineer

Department of the Army
U.S. Army Corps of Engineers
Engineering Division - Civil Branch
This job announcement has closed

Summary

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the Department of Defense to recruit and appoint qualified candidates to positions in the competitive service.

About the Position: You will serve as a civil engineer performing civil design work, reviewing, and coordinating the work of other engineers.

This is an Open Continuous announcement. ONCE THE SELECTION IS MADE, THIS ANNOUNCEMENT MAY BE CLOSED WITHOUT FURTHER NOTICE.

Overview

Help
Hiring complete
Open & closing dates
03/22/2024 to 09/23/2024
Salary
$44,041 to - $125,801 per year
Pay scale & grade
GS 5 - 12
Location
2 vacancies in the following location:
New Orleans, LA
Remote job
No
Telework eligible
Yes—as determined by the agency policy.
Travel Required
Occasional travel - You may be expected to travel up to 10% for this position.
Relocation expenses reimbursed
No
Appointment type
Term - 13 months. May be extended up to a maximum of eight years. See qualifications section for additional details.
Work schedule
Full-time
Service
Competitive
Promotion potential
12
Job family (Series)
Supervisory status
No
Security clearance
Not Required
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Announcement number
CERG249168632192HWS
Control number
783065400

Videos

Duties

Help
  • Provides advice and recommendations on civil engineering design work, including flood damage risk reduction, navigation, and channel improvement work to other professional and nonprofessional personnel.
  • Reviews and coordinates the work of other engineers of the district, A-E contractors, and other districts for technical accuracy, compliance with latest techniques, and adherence to Corps procedures.
  • Develops design details required for major and extraordinarily difficult civil engineering design work, including flood damage risk reduction, navigation, and channel improvement projects.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • Appointment to this position may be subject to a one-year trial period.
  • A current, active, full, and unrestricted license as a Registered Professional Engineer (PE) will be required prior to promotion or appointment to the GS-12 grade level and must be maintained for continued employment.
  • Temporary travel (TDY) of up to 10% of the time may be required.
  • This is an obligated position to which an employee has statutory restoration rights or entitlement. May be displaced upon the return of the former incumbent.

Qualifications

****This Open Continuous announcement allows acceptance of applications through the closing date. The intent of this announcement is to establish a standing register of qualified candidates and refer for consideration when vacancies occur. Applications will be reviewed and referred for selection as vacancies occur within the organization. ONCE THE SELECTION IS MADE, THIS ANNOUNCEMENT MAY BE CLOSED WITHOUT FURTHER NOTICE. The 1st Cut-Off date for receipt and referral of applicants to be considered for vacant positions will be 5 Apr 2024.*****

Position may be filled as a term appointment NTE 13 months. Term appointments may be extended beyond six (6) years, up to eight (8) years. With DoD approval, term appointments may be extended beyond eight (8) years. Position may be made permanent without further competition.

Current permanent Federal employees (to include permanent Army employees) applying for a term appointment will be appointed/converted into a term appointment with no statutory return rights back to a permanent position.

Who May Apply: US Citizens

In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Education Requirement for All Grades is listed in the Education Section.

GS-05 Position:
Candidate must meet the basic education requirement described in the education section.

GS-07 Specialized Experience: One year of specialized experience which includes 1) Learning and assisting with the review of engineering design plans and/or specifications for accuracy; and 2) Learning to prepare design features for civil works projects, such as contract plans, specifications, and as-built drawings. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05).
OR
Education: One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Civil Engineering, Structural Engineering, Transportation and Highway Engineering.
OR
Superior Academic Achievement. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. Superior Academic Achievement is based on:
(1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR
(2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR
(3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/).
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages.

GS-09 Specialized Experience: One year of specialized experience which includes 1) Reviewing engineering design plans and/or specifications for accuracy; and 2) Preparing design features for civil works projects, such as contract plans, specifications, and as-built drawings. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07).
OR
Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Civil Engineering, Structural Engineering, Transportation and Highway Engineering.
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages.

GS-11 Specialized Experience: One year of specialized experience which includes 1) Experience working with federal contractors regarding project changes on civil works projects; and 2) Experience advising on matters relating to flood control, navigation, dredging on civil work projects. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).
OR
Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Civil Engineering, Structural Engineering, Transportation and Highway Engineering.
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

GS-12 Specialized Experience: One year of specialized experience which includes 1) Independently performing engineering design work; and 2) Providing guidance to others in the construction of civil engineering projects; and 3) Reading and interpreting construction plans and specifications; and 4) Calculating and estimating material take-offs for a construction project. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).
Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Qualification requirement: Qualifications must be met by the closing date of this announcement.

Education

Basic Requirement for Civil Engineer

A. Degree:
Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed in the Qualifications section of this announcement.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • One year trial/probationary period may be required.
  • Direct Deposit of Pay is required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a(n) Engineers & Scientists (Construction) Career Field position.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • Payment of Permanent Change of Station (PCS) costs is NOT authorized, based on a determination that a PCS move is not in the Government interest.
  • Recruitment/relocation incentive MAY BE approved.
  • Management may select at any of the grade levels announced. This position has promotion potential to the GS-12.
  • Promotion is never automatic. Promotion is based on the recommendation by the supervisor that employee meets all necessary qualification requirements for promotion, is performing the full scope of the major duties, and is functioning under the supervisory controls as stated in the target job description.
  • This position requires the employee to obtain and maintain a Professional Engineer (PE) license for promotion or appointment to the GS-12

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.

Veterans and Military Spouses will be considered along with all other candidates.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.