Skip to main content
U.S. flag
Back to results

Mechanical Engineer - Direct Hire

Department of the Army
U.S. Army Corps of Engineers
This job announcement has closed

Summary

About the Position: Serves as either a developmental or senior Mechanical Engineer, responsible for developing mechanical designs; performing technical reviews of mechanical designs developed by Architectural-Engineering firms (A-E), and resolving mechanical design problems arising during construction for a wide range of conventional and unconventional mechanical design features.

NOTE: Recruitment incentives, including student loan repayment, may be offered to highly qualified candidates.

Overview

Help
Hiring complete
Open & closing dates
03/25/2024 to 08/05/2024
Salary
$103,507 to - $138,947 per year
Pay scale & grade
GS 11 - 12
Locations
Few vacancies in the following locations:
Phoenix, AZ
Sacramento, CA
Remote job
No
Telework eligible
Yes—as determined by the agency policy.
Travel Required
25% or less - Business Travel (TDY) is approximately 25% of the time.
Relocation expenses reimbursed
Yes—Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
12
Job family (Series)
Supervisory status
No
Security clearance
Not Required
Drug test
No
Position sensitivity and risk
Noncritical-Sensitive (NCS)/Moderate Risk
Trust determination process
Financial disclosure
No
Bargaining unit status
No
Announcement number
CERI249358171314HW
Control number
783038800

This job is open to

Help

Clarification from the agency

The public

Videos

Duties

Help
  • This is a developmental position. The duties of this position lead to the full performance level of GS-0830-12.
  • Typical GS-12 Duties:
  • Develops mechanical design drawings and specifications (HVAC, plumbing, fire suppression, etc.) for projects containing diverse, complex, and unconventional mechanical systems and features found in vertical design and Military Construction Projects.
  • Participates in pre-design, design review, and other technical conferences or reviews conference memoranda to clarify principal technical features of HVAC/Plumbing/Fire Protection Design and identify any special conditions.
  • Performs HVAC engineering analysis, whole building energy modeling, HVAC equipment selection, Life Cycle Cost Analysis using Trane Trace 700, Trace 3D Plus or similar. Develops design drawings using AutoDesk Revit BIM software.
  • Assists supervisor with planning, organizing and monitoring the work carried out by Section personnel in the predominantly assigned area.
  • Plans and develops (or directs development by lower grade Mechanical Engineers) the mechanical design schedule and budget.
  • Provides technical guidance to lower grade Mechanical Engineers and Technicians.
  • Performs technical reviews of the mechanical engineering aspects (HVAC, plumbing, fire suppression) of design packages prepared by A-E firms.
  • Provides mechanical engineering support to Construction Division in resolving mechanical problems prior to, during and after construction for Military, Civil Works and Hazardous, Toxic and Radiological Waste (HTRW) projects.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • Must obtain and maintain a valid state issued driver's license.

Qualifications

Direct Hire Authority for Certain Personnel of the Department of Defense.

NOTE:
This is a developmental position. The duties of this position lead to the full performance level of GS-0830-12. Incumbent may be appointed to the GS-11 or GS-12 (depending on qualifications). If selected at the lower grade, the incumbent may be non-competitively promoted to the next higher grade level of the position upon: meeting all regulatory requirements; certification by the supervisor of successful performance; completion of all training requirements; and the availability of work at the next higher grade level. Promotion is not automatic.

Applicants will be referred periodically throughout the open period. Final application disposition will be completed once all positions have been filled or the announcement reaches the end of the open period as stated above. Applications will expire 90 days after submission. To remain eligible for consideration, reapplying is required every 90 days.

Who May Apply: US Citizens

In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Requirement for Engineer:
Please refer to the General Schedule Qualification Standards Basic Requirements for Engineering Series for education requirements. (NOTE: Applicants MUST submit/upload a copy of the transcripts with the application package. For application purposes, unofficial transcripts are acceptable.)

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

Minimum Qualifications for the GS-11:

Specialized Experience:
One year of specialized experience which includes experience developing Mechanical, Plumbing, and Fire Protection drawings, plans and specifications, writing technical reports and performing the technical review of mechanical, plumbing, and fire protection design products developed internally or by A-E firms. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service GS-09.

OR

Education:
Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Mechanical Engineering or related discipline.

OR

Combination of Education and Experience:
A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

Minimum Qualifications for the GS-12:

Specialized Experience:
One year of specialized experience which includes the study, layout, and design of Milcon projects such as: military facilities and structures including offices, warehouses, housing or the civilian equivalent; experience developing Mechanical, Plumbing, and Fire Protection drawings, plans and specifications, writing technical reports, preparing applicable portions of studies and analyses supporting project design documents, formulating and resolving design issues during construction, and experience performing or overseeing the technical review of mechanical, plumbing, and fire protection design products developed internally or by A-E firms. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service GS-11.

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted for the GS-12.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • One year trial/probationary period may be required.
  • Direct Deposit of Pay is required.
  • Sacramento:
    • GS-11 annual salary range $103,507- $122,137
    • GS-12 annual salary range $116,618 - $138,947
  • Phoenix:
    • GS-11 annual salary range $103,507 - $122,137
    • GS-12 annual salary range $114,137 - $136,466
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is an Engineers & Scientists (Construction) Career Field position.
  • This is NOT a drug testing position.
  • Hiring Incentives MAY BE Authorized.
  • Permanent Change of Station (PCS) allowances MAY BE authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.
  • When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction/ for more information.
  • Credit will be given for appropriate unpaid or volunteer work.
  • Salary includes applicable locality pay or Local Market Supplement.
  • Further selections from this announcement may take place up to 90 days beyond the closing date of the announcement.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.

Veterans and Military Spouses will be considered along with all other candidates.

Basis for Rating: Direct Hire Authority (DHA) for Certain Personnel of the DoD Workforce is open to all U.S. Citizens. The category rating, veterans preference and traditional rating and ranking of applicants does not apply to this vacancy.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.