Skip to main content
U.S. flag
Back to results

CIVIL ENGINEER

Department of the Army
U.S. Army Corps of Engineers
SAN FRANCISCO ENGINEERING BRANCH WATER RESOURCE SECTION
This job announcement has closed

Summary

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service.

About the Position: This is a developmental position. The duties of this position lead to the full performance level of GS-0810-12. Incumbent may be selected to either the GS-09, GS-11 or GS-12 (depending on qualifications).

Overview

Help
Job canceled
Open & closing dates
01/17/2024 to 04/18/2024
Salary
$74,642 to - $140,713 per year

GS-09: $74,642-$97,034 / GS-11: $90,310-$117,400 / GS-12: $108,245 - $140,713

Pay scale & grade
GS 9 - 12
Location
1 vacancy in the following location:
San Francisco, CA
Remote job
No
Telework eligible
Yes—as determined by the agency policy.
Travel Required
Occasional travel - You may be expected to travel for this position.
Relocation expenses reimbursed
Yes—You may qualify for reimbursement of relocation expenses in accordance with agency policy. See Additional Information for other available incentives.
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
12
Job family (Series)
Supervisory status
No
Security clearance
Not Required
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Announcement number
CERI248162725164HWS
Control number
770767700

This job is open to

Help

Clarification from the agency

All U.S. Citizens.

Duties

Help
  • This position performs planning and engineering design work of coastal engineering.
  • These projects include, but are not limited to breakwaters, jetties, navigation channels, harbor projects, coastal processes assessments, environmental remediation projects, navigation projects, beach erosion control and storm-damage reduction.
  • Also conducts special studies and applies specialized knowledge in wave mechanics, coastal process, coastal engineering and a generalized knowledge of civil engineering.
  • Planning studies, performing design work and performing technical consistency reviews for major coastal projects.
  • Managing and generating technical reports and papers on special monitoring projects that are being conducted within the District.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • TDY travel is required approximately 20 percent of the time.
  • Conducts field work and construction site visits involving strenuous hiking on breakwaters and jetties, activities in surf zone, activities on small craft and work boats, and activities along wharves, docks, dredges and marine construction equipment.
  • Occasionally makes presentations at coastal engineering workshops and conferences.
  • Must be able to obtain and maintain a valid state driver's license.

Qualifications

Who May Apply: US Citizens

In order to qualify, you must meet the experience and education requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Requirement for CIVIL ENGINEER:

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

GS-09 Specialized Experience: One year of specialized experience which includes assisting with the planning, developing, and analyzing civil engineering drawings and specifications in the coastal engineering field. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07).

OR

Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Civil Engineer.

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages.

GS-11 Specialized Experience: One year of specialized experience which includes planning, developing, and analyzing civil engineering drawings and specifications in the coastal engineering field and resolving design related problems. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).

OR

Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: [insert applicable field(s) of study].

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

GS-12 Specialized Experience: One year of specialized experience which includes developing design analysis to formulate and evaluate the coastal processes, such as erosions, flooding, sediments, waves, etc and preparing design proposals. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-[insert 11).

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this position, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted at the GS-12.

SELECTIVE PLACEMENT FACTOR REQUIREMENT
You must possess a current Professional Engineer (PE) license in good standing issued by one of the 50 states, or its territories at the time of your application for the GS-12 position. For the GS-09 and GS-11 positions you must be willing and able to obtain and maintain a PE license prior to entering the GS-12.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • One year trial/probationary period may be required.
  • Direct Deposit of Pay is required.
  • This is a developmental position. The duties of this position lead to the full performance level of GS-0810-12.
    Incumbent may be selected to either the GS-09, GS-11 or GS-12 (depending on qualifications).
    If selected at the GS-09 or GS-11, the incumbent may be non-competitively promoted to the target level of the position upon:
    (1) meeting all regulatory requirements,
    (2) certification by the supervisor of successful performance,
    (3) completion of all training requirements, and (4) the availability of work at the next higher grade level.
    (4) promotion is not automatic.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a Construction, Engineering, Infrastructure Career Field position Career Field position.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • GS-09 Salary Range: $74,642-$97,034 per annum.
  • GS-11 Salary Range: $90,310-$117,400 per annum.
  • GS-12 Salary Range: $108,245-$140,713 per annum.
  • Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.
  • Recruitment incentives, Relocation, including student loan repayment, may be offered to highly qualified candidates (who meet the incentive eligibility requirements).

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.

Veterans and Military Spouses will be considered along with all other candidates.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.