Skip to main content
U.S. flag
Back to results

Civil Engineer

Department of the Army
U.S. Army Corps of Engineers
Far East District, Engineering Division
This job announcement has closed

Summary

About the Position: Must be able to satisfy the requirements of the 26JUL12 DODI 1400.25 V1230, DoD Civilian Personnel Management System: Employment in Foreign Areas and Employee Return Rights.

The full performance level of this position is GS-12.

The Special Rate Table number 414F will apply.

Overview

Help
Hiring complete
Open & closing dates
11/16/2023 to 12/07/2023
Salary
$67,277 to - $94,799 per year
Pay scale & grade
GS 11 - 12
Location
1 vacancy in the following location:
PYONG TAEK, South Korea
Remote job
No
Telework eligible
No
Travel Required
25% or less - You may be expected to travel 15% of the time for this position.
Relocation expenses reimbursed
Yes—You may qualify for reimbursement of relocation expenses in accordance with agency policy.
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
12
Job family (Series)
Supervisory status
No
Security clearance
Secret
Drug test
No
Position sensitivity and risk
Noncritical-Sensitive (NCS)/Moderate Risk
Trust determination process
Announcement number
FERM237323536174HE
Control number
761020900

This job is open to

Help

Clarification from the agency

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service.

Videos

Duties

Help
  • Serves as a Civil Engineer in the Geotechnical Design Unit.
  • Applies geotechnical expertise in the planning, design, construction, and performance monitoring of buildings, roads, airfields, pier, tunnels, slopes and excavations, drainage works, and other civil structures on US military installation.
  • Supports environmental investigations, groundwater studies, and site remediation designs.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • One-year trial/probationary period may be required.
  • You will be required to provide proof of U.S. Citizenship.
  • This position requires the incumbent be able to obtain and maintain a determination of eligibility for a Secret security clearance or access for the duration of employment.
  • This position requires 15% of Temporary Duty (TDY) Travel.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.

  • Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible
  • Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement
  • Priority Placement Program, DoD Retained Grade Preference Eligible


In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Requirement for Civil Engineer:

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.

3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.

4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

Specialized Experience:For GS-11: One year of specialized experience which includes: 1) preparing civil engineering designs, plans, specifications or cost estimates for civil engineering projects with geotechnical aspects;

OR

2) reviewing work in progress for geotechnical engineering projects to ensure conformance with contract plans and specifications. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).

OR

Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Civil Engineering.

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

For GS-12: One year of specialized experience which includes: 1) reviewing design plans for civil works projects to ensure feasibility and conformance with contract plans and specifications;

AND 2) conducting inspections, studies, risk assessments, or evaluations on civil works projects with geotechnical concerns. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11 or above).You will be evaluated on the basis of your level of competency in the following areas:


Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next second grade or equivalent.
For GS-12 level, one year at the GS-11.
For GS-11 level is required one year at the GS-09.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Additional information

  • Direct Deposit of Pay is required.
  • U.S. citizens overseas under ordinarily resident status are not eligible for appointment under the Status of Forces Agreement.
  • Locality pay does not apply in the overseas area.
  • This position requires you to submit a Confidential Financial Disclosure Report (OGE450) upon entry, and annually thereafter.
  • If an employee brings a child to an overseas location and that child is entitled to attend a DoD school on a space-required basis in accordance with DoDEA Regulation 1342.13, the DoDEA and the Military Department responsible for providing related services will ensure that the child, if eligible for special education, receives a free appropriate public education, including related services pursuant to DoDI 1342.12 and DoDM 1342.12.
  • If an employee brings an infant or toddler (up to 3 years of age) to an overseas location, and that infant or toddler is entitled to attend the DoDEA on a space-required basis in accordance with DoDEA Regulation 1342.13, then the Military Department responsible for EIS will provide the infant or toddler with the required EIS in accordance with the eligibility criteria consistent with DoDI 1342.12 and DoDM 1342.12.
  • Employees (and family members) who require medical or dental care in the overseas location will be responsible for obtaining and paying for such care. Access for civilian employees and their families to military medical and dental treatment facilities is on a space-available and reimbursable basis only.
  • Medical and dental care may be provided by host nation providers. The availability and level of care at host nation medical and dental facilities will vary by location.
  • Pay retention may be offered to selected applicants for positions at overseas locations. Pay retention will not be offered as an incentive for employees moving between overseas positions.
  • Selectees may receive certain foreign area benefits such as: Living Quarters Allowance (LQA) or government quarters, home leave, etc. Selectees will have their eligibility for foreign area benefits determined at the time of hire in accordance with Department of State Standardized Regulation (DSSR) and DoDI 1400.25 volume 1250.
  • For positions in a foreign country, that country's laws or international agreements may have a direct impact on the ability of an employee's same sex domestic partner or spouse to accompany the employee and receive certain benefits. If you believe you may be affected by these laws and agreements, you should familiarize yourself with relevant information and direct questions concerning a specific country (Foreign Duty Location) to the appropriate Army Human Resources point of contact prior to the acceptance of employment and your entrance on duty.
  • The initial length of this overseas tour is 36 months.
  • This is a Career Program (CP) 18 - Engineer and Scientist position.
  • When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction/ for more information.
  • If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application.
  • Payment of Permanent Change of Station (PCS) costs is authorized, subject to the provisions of the Joint Travel Regulations.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. If you are minimally qualified, your résumé and supporting documentation will be compared against your responses to the assessment questionnaire to determine your level of experience. If, after reviewing your résumé and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.

U.S. citizens overseas under ordinarily resident status are not eligible for appointment under the Status of Forces Agreement.

Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.