Skip to main content
U.S. flag
Back to results

Civil Engineer

Department of Agriculture
Forest Service
This job announcement has closed

Summary

This position performs professional engineering work on conventional engineering projects.

This is an open and continuous announcement. See Additional Information section for more information. Applications will expire every 90 days. To remain active for consideration, applicants must resubmit their application.

Positions may be filled at one or more of the duty locations included in this announcement.

Final determination of the duty location will be made at the time of the job offer.

Overview

Help
Hiring complete
Open & closing dates
11/15/2023 to 07/15/2024
Salary
$63,734 to - $69,107 per year

Pay rates vary depending on location and the salary shown is for the Rest of the U.S. See OPM.gov for additional information on pay rates.

Pay scale & grade
GS 9 - 11
Locations
MANY vacancies in the following locations:
Russellville, AR
Flagstaff, AZ
Overgaard, AZ
Phoenix, AZ
Remote job
No
Telework eligible
Yes—as determined by the agency policy.
Travel Required
Occasional travel - You may be expected to travel for this position.
Relocation expenses reimbursed
Yes—A recruitment or relocation incentive, or reimbursement of relocation expenses may be authorized at the discretion of management in accordance with agency policy.
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
11 - Target grade of the position may vary based on duty location, please see "Additional Information" for more information.
Job family (Series)
Supervisory status
No
Security clearance
Not Required
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Announcement number
24-POD3-OCR-0810-ENG-9-11DP
Control number
760384100

Videos

Duties

Help
  • The responsibilities listed below are at the full performance GS-11 level.
  • Provides professional engineering input into the interdisciplinary planning process for natural resource development activities involving engineering projects.
  • Develops and modifies civil engineering plans and specifications for new construction or to improve utility, quality of construction.
  • Prepares original designs and preliminary and final layouts of projects such as road design, small bridges, retaining walls, major drainage structures, erosion control features, buildings, towers, small dams, and recreation sites.
  • Prepares or supervises preparation of special design specifications, cost estimates, and complete design package.
  • Prepares Environmental Analysis, Environmental Impact Statements, and special reports with regard to new or improved engineering construction.
  • Responsible for contract compliance on assigned projects.
  • Interprets Agency policy and contracts for contractor, and resolves problems relating to plans, specifications, materials, reports, etc.

Requirements

Help

Conditions of employment

  • Must be a U.S. Citizen or National.
  • Males born after 12-31-59 must be registered for Selective Service or exempt.
  • Subject to satisfactory adjudication of background investigation and/or fingerprint check.
  • Successful completion of one-year probationary period, unless previously served.
  • Per Public Law 104-134 all Federal employees are required to have federal payments made by direct deposit to their financial institution.
  • Successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit E-Verify.

Qualifications

In order to qualify, you must meet the eligibility and qualifications requirements as defined below by the closing date of the announcement. For more information on the qualifications for this position, visit the Office of Personnel Management's General Schedule Qualification Standards.

Your application and resume must clearly show that you possess the experience requirements. Transcripts must be provided for qualifications based on education. Provide course descriptions as necessary.

Basic Requirement All Professional Engineering Positions, 0800:
GS-0810: You must have an Engineering Degree. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2)include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics;(d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials(relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
You must have a combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

(1) Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test(e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

(2) Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.

(3) Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.

(4) Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)

In addition to meeting the basic requirement, you must also possess experience and/or directly related education in the amounts listed below.

Specialized Experience Requirement:
For the GS-09: You must have one year of specialized experience equivalent to the GS-07 in the Federal service. Examples of specialized experience include one or more of the following: Assisted in designing and developing routine construction drawings and specifications for projects with straightforward technical characteristics; Assisted with site visits to ensure construction was conducted in accordance with established contract specifications; Assisted in gathering data used to monitor the progress of contractors in achieving contract requirements and project milestones such as performing basic surveys and investigations to establish baseline data used to initiate a requirements review; Participated in facilities engineering management duties by coordinating routine maintenance and repair work at facilities such as housing complexes, administrative buildings, technical or special support buildings, warehouses, community facilities, or water/wastewater systems.
OR
Completed 2 years of progressively higher-level graduate education leading to a master's degree or master's or equivalent graduate degree (coursework directly related to Engineering).
OR
Completed a 5-year program of study of at least 160 semester hours leading to a bachelor's degree in engineering and 1 year of appropriate professional experience.
OR
Have a combination of superior academic achievement and 1 year of appropriate professional experience.
OR
Have a combination of specialized experience and education (only graduate education in excess of 18 semester hours may be used to qualify applicants for this grade level).

For the GS-11: You must have one year of specialized experience equivalent to the GS-09 in the Federal service. Examples of specialized experience include one or more of the following: Monitored day-to-day performance of a contract by reviewing drawings for accuracy and adequacy, evaluated requests for routine design deviations, and/or conducted site surveys to determine the need for new equipment or material; Prepared civil engineering design criteria for smaller or less complex projects, including portions of structures such as bridges, retaining walls, or structural pavement sections; Planned and conducted engineering projects according to clear and specified objectives such as developing technical data on materials, sizes, dimensions, and quantities and costs of materials to be incorporated in formal specifications; Performed routine safety related assessments, such as determining compliance with existing Federal, State, and/or organization safety regulations and/or analyzed and evaluated potential safety regulation deficiencies.
OR
Have 3 years of progressively higher-level graduate education leading to a Ph.D. degree or Ph.D or equivalent doctoral degree (coursework directly related to Engineering).
OR
Have an appropriate combination of specialized experience and graduate level education (beyond what is required for a master's degree, i.e., more than 36 semester hours leading to a Ph.D.) Professional engineering experience is defined as nonroutine engineering work that required and was characterized by (1) professional knowledge of engineering; (2) professional ability to apply such knowledge to engineering problems; and (3) positive and continuing development of professional knowledge and ability.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

See above for education that may be qualifying for the specific grade level.

Additional information

THIS IS AN OPEN CONTINUOUS ANNOUNCEMENT
This type of announcement provides the Forest Service with a readily available source of applicants when vacancies occur. Eligibility and qualifications will be verified when there is a vacancy for the location and grade for which you applied.

Additional duty locations may be added throughout the life of this announcement.
It is the responsibility of the applicant to periodically review this vacancy announcement for additional duty locations. You must update your application to include all locations for which you want to be considered. You will not be considered for duty locations not selected in your application. The target grade of the positions may vary by duty location. Information on specific locations where jobs are being filled and the dates when applications are due for these locations can be found at https://fsoutreach.gdcii.com/Outreach.

The USDA Forest Service has legislative authority to recruit and fill Permanent (Career/Career-Conditional), Temporary, and Term Appointments under the USDA Demonstration Project. Under this authority, any U.S. citizen may apply.

Career Transition Assistance Plan (CTAP), Reemployment Priority List (RPL), or Interagency Career Transition Assistance Plan (ICTAP): To exercise selection priority for this vacancy, CTAP/RPL/ICTAP candidates must meet the basic eligibility requirements and all selective factors. CTAP/ICTAP eligibles must meet the agency's definition for a quality candidate as provided in the How You Will Be Evaluated section of this announcement to be considered.

If you are selected for a position with further promotion potential, you will be placed under a career development plan, and may be non-competitively promoted if you successfully complete the requirements and if recommended by management. However, promotion is not guaranteed.

This position may be eligible to telework up to four days per week, based upon the duties of the position. This position may also be eligible for flexible work arrangements as determined by agency policy and any applicable collective bargaining agreements.

The Forest Service may use certain incentives and hiring flexibilities, currently offered by the Federal government, to attract highly qualified candidates. Additional information is available at https://www.opm.gov/policy-data-oversight/pay-leave/pay-and-leave-flexibilities-for-recruitment-and-retention/

Salary wage as shown is for Rest of the U.S. Final salary will be determined at the time of selection dependent on the duty location For more information, refer to the Office of Personnel Management, Salary and Wages web page.

Positions filled from this announcement may be a bargaining or a non-bargaining unit position represented by either NFFE, AFGE or NAGE..

Forest Service daycare facilities may be available.

Government Housing may be available.

We may select from this announcement or any other source to fill one or more vacancies.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

You will be evaluated in accordance with the category rating procedure as defined in the USDA Demonstration Project Plan. Applicants who meet the basic minimum qualification requirements established for the position will be placed in the Eligible category. You will be further evaluated against criteria for placement in the Quality category. This evaluation is based on the level of your experience, education, and/or training as determined by your responses to the Assessment Questionnaire. Individuals with veterans' preference are listed ahead of applicants who do not have veterans' preference within each category.

Note: If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your score may be adjusted to more accurately reflect your abilities, or you may be found ineligible. Please follow all instructions carefully. Errors or omissions may affect your rating. Providing inaccurate information on Federal documents could be grounds for non-selection or disciplinary action up to including removal from the Federal service.

To view the application form, visit: https://apply.usastaffing.gov/ViewQuestionnaire/12200533

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.