The position serves as a Safety Engineer in the Technical Programs Team within the Tennessee Federal-aid Highway Division of the Federal Highway Administration (FHWA), Department of Transportation (DOT). The incumbent’s principal duties include administering, promoting, evaluating, and coordinating Safety programs and initiatives.
Summary
The position serves as a Safety Engineer in the Technical Programs Team within the Tennessee Federal-aid Highway Division of the Federal Highway Administration (FHWA), Department of Transportation (DOT). The incumbent’s principal duties include administering, promoting, evaluating, and coordinating Safety programs and initiatives.
Applications will be accepted from any U.S. citizen.
Direct Hire Authority will be used to fill this position. The 'Rule of Three', Veterans Preference and traditional rating and ranking of applicants does not apply to this vacancy.
This is not a Bargaining unit position.
Provide guidance and direction to TDOT in developing the Strategic Highway Safety Plan (SHSP). Assist TDOT in the development and planning of the Highway Safety Improvement Program (HSIP)Analyzes the processes by which the State develops safety plans. Identifies safety problem areas and suggests improvements needed during the safety planning process. Provide direction and technical advice to the State (and local agencies) in achieving FHWA safety-related goals and objectives.
Represent the Division and serve as the liaison to develop and maintain interagency coordination and cooperation on highway safety issues. Monitor, coordinate, and provide technical assistance to the TDOT and Division office on emerging and existing safety-related design, construction, operation, and maintenance standards and practices that are incorporated into Federal-aid and other highway projects.
Evaluate compliance by TDOT and local jurisdictions of Federal highway safety regulations, policies, and goals. Communicate findings, recommendations, and suggestions to TDOT and local jurisdictions.
Screen, disseminate, and market highway safety research, demonstration projects, training courses, and technology transfer products to TDOT and State/local agencies. Develop and promote FHWA priorities to TDOT in developing the Strategic Highway Safety Plan (SHSP) in cooperation with NHTSA Region and in alignment with FHWA national goals.
Provide technical guidance and assistance to the State (and local agencies) in implementing safety related FHWA policies and procedures.
The ideal candidate possesses knowledge and experience in the planning, design, and implementation of transportation safety in conformance with State and Federal laws and regulations. This position is ideal for a professional who has knowledge and experience in highway project design, construction, operations, and maintenance, including traffic engineering, and traffic safety, with excellent communication skills and the ability to represent the agency in a professional manner.
You must be a U.S. citizen & meet specialized experience to qualify
Submit application and resume online by 11:59 PM EST on the closing date
Required documents must be submitted by the closing date.
Direct Hire Authority will be used to fill this position
CONDITIONS OF EMPLOYMENT:
SELECTIVE SERVICE: Males born after 12/31/1959 must be registered for the Selective Service.
GOVERNMENT TRAVEL CARD: This position involves travel. A government contractor-issued travel card will be issued and must be retained for official business only.
PCS/RELOCATION/RECRUITMENT: Permanent Change of Station (PCS), Relocation, and Recruitment Incentive authorization varies by position/selection.
PROBATIONARY PERIOD: Applicants may be required to successfully complete a one-year probationary period (unless already completed).
BACKGROUND INVESTIGATION: If you are not a current Federal employee, you will be required to complete a background/security investigation and meet preliminary requirements prior to onboarding
Qualifications
To meet the basic qualifications for this position, you must (1) meet the Mandatory Education Requirement for the series, (2) provide a copy of your transcripts or other applicable documentation for verification, AND (3) meet the specialized experience requirements for each grade you are applying to. Please review the following information before proceeding with the application process:
(1) All applicants must meet the requirements under A or B to qualify for applying to an engineering position.
A.Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) that included differential and integral calculus and courses (more advanced that first year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials; (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials; and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics;
OR
B.Combination of education or training: college level education, training and/or technical experience that has furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.
The adequacy of such background must be demonstrated by one of the following:
Professional registration or licensure - current registration as an Engineer Intern (EI), engineer in Training (EIT), or licensure as a Professional Engineer (PE).
Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences which included the courses as specified in Paragraph A above.
Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. There should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering type experience. This must be clearly described in your resume.
(2) Upload the appropriate document(s) to your application for verification purposes.
(3) Specialized Experience:
To determine if you may be eligible, review the following grade specific details. You will be asked a few questions as part of your application but make sure to verify how you meet this experience in your resume or you may be deemed ineligible.
To qualify for the GS-11 on Experience, you must have at least one year of experience equal or equivalent to the GS-09 it must include:
Experience in the planning, design, and implementation of transportation safety in conformance with State and Federal laws and regulations; in accordance with engineering design and construction standards, principles and methods.
To qualify for the GS-11 on Education alone, you must have: 3 years of progressively higher level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree. You can also qualify based on a combination of higher level graduate education and experience. This must be fully supported by your resume and transcripts, provided with your application.
To qualify for the GS-12 on Experience, you must have at least one year of experience equal or equivalent to the GS-11 it must include:
Experience in the planning, design, and implementation of transportation safety in conformance with State and Federal laws and regulations; in accordance with engineering design and construction standards, principles and methods; AND
Experience in highway project design, construction, operations, and maintenance, including traffic engineering, and traffic safety, and has excellent communication skills; AND
Experience in consultation with others, developing alternatives and helping to resolve engineering issues or conflicts that arise with processes or outcomes.
You cannot qualify on education at the GS-12 level; you must have experience.
KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
Civil Engineering
o Capable of providing guidance and direction to the State in developing the Strategic Highway Safety Plan (SHSP). Assist the State in the development and planning of the Highway Safety Improvement Program (HSIP)Analyzes the processes by which the State develops safety plans. Can also identify safety problem areas and suggests improvements needed during the safety planning process. Has the ability to provide direction and technical advice to the State (and local agencies) in achieving FHWA safety-related goals and objectives. o Proficient in providing technical guidance and assistance to the State (and local agencies) in implementing safety related FHWA policies and procedures.
o Compliance
o Analyze and evaluates, through systematic technical and administrative reviews, the implementation of the State's highway safety plans (HSP) and programs. Emphasis is placed on compliance by the State (and local agencies) with Federal regulations, FHWA policies and supplementary directives as they relate to the safety goals of FHWA.
o Oral Communication
o Makes clear and convincing oral presentations that project confidence and professionalism. Listens effectively; clarifies information as needed
o Written Communication
o Writes in a clear, concise, organized, and convincing manner for the intended audience.
For all types of consideration, experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience
For additional information about applying to Federal positions, please click on the following link: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-policies/#url=e4
Students enrolled in a qualifying degree program can apply if the anticipated graduation date is within six months of closing date of the announcement. Graduation transcript must be received before start date.
Other applicants must meet all qualification requirements by the closing date of this announcement.
Education
MANDATORY EDUCATION REQUIREMENTS:
A. Degree: Engineering To be acceptable, the program must: (1) lead to a bachelor’s degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR
Combination of education and experience -- College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor’s degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive).
(2) Specialized Experience: To determine which grade(s) you are eligible for, review the following grade specific details. You will be asked questions as part of your application but make sure to verify how you meet this experience in your resume or you may be deemed ineligible.
(3) Upload the appropriate document(s) to your application for verification purposes. (Refer to 'Required Documents' section for additional guidance). Students enrolled in a qualifying degree program can apply if the anticipated graduation date is within six months of the closing date of this announcement. If selected, the final transcript must be received before your start date. Other applicants must meet all qualification requirements by the closing date of this announcement. Transcripts are required for this position.
Additional information
This announcement may be used to fill additional positions if similar vacancies occur within 90 days of the issue date of the referral certificate.
Qualified CTAP/ICTAP candidates receive priority and will be referred to the hiring manager.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How you will be evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
For this announcement, all applicants will be reviewed to determine if they meet the basic qualifications for this position, specifically the educational requirements. Applications that are verified to meet the basic qualifications will be referred to the selecting official.
Applicants will not be rated or ranked. Veteran’s Preference does NOT apply.
DESCRIBING YOUR EXPERIENCE: PLEASE BE CLEAR AND SPECIFIC. WE WILL NOT MAKE ASSUMPTIONS REGARDING YOUR EXPERIENCE. All answers provided in the on-line process must be substantiated by a resume. If, upon review, it is determined that your resume and/or supporting documents do not support your answer choices, your application may be removed from consideration.
Please ensure that your work history provides enough details to support your answers.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
ALL Applicants must provide a resume that fully supports the required specialized experience and was created within USA Jobs Resume Builder and respond to the vacancy questions by the closing date of the vacancy. Formatted resumes can be uploaded when you arrive at the DOT application system. For assistance with the resume builder, please visit: https://www.usajobs.gov/Help/how-to/account/documents/resume/build/
Transcripts are REQUIRED per the mandatory education requirement for the series, and also if you are applying based on education for the GS-11 grade.
Foreign education must be reviewed by an organization recognized by the U.S. Department of Education. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. For special instructions pertaining to foreign education and a list of organizations that can evaluate foreign education, see the Department of Education website.
If you are applying to an engineering position and are qualifying based on possessing a current Professional Engineer (PE) license, or passing the Engineer in Training (EIT) exam, please provide a copy of PE license or written documented proof of passing the EIT.
DISPLACED EMPLOYEES: If requesting consideration under the Career Transition Assistance Program (CTAP) or Interagency CTAP program (ICTAP), you must meet the well qualified standards for this vacancy (meeting minimum requirements for position and scoring at least an 85) and provide all of the following documents:
your most recent performance appraisal,
the proof of eligibility letter from the Agency, and
your most current SF-50, displaying current series and grade.
Displaced employees may be eligible for ICTAP or CTAP priority consideration.
Failure to submit any of the required documents by the closing date of the vacancy will result in your removal from consideration for this position. Please review your application prior to final submission and ensure you have submitted all appropriate documents. Uploading documents to USA Jobs does NOT ensure inclusion with your application to our system. You must verify that the documents are in the system with your application prior to final submission.
If you are relying on your education to meet qualification requirements:
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
You must submit a complete application package (including resume, vacancy questions and supporting documents) no later than 11:59 pm (EST) on the closing date of the announcement.
To begin, click the "Apply Online" button on the job announcement posting.
Follow the directions to register, submit all required documents and complete the assessment questionnaire.
You may review your saved application(s) at https://my.usajobs.gov.
If you are having difficulty applying online, please contact the DOT Automated Staffing Office via email at: Transjobs@dot.gov
DOT, FEDERAL HIGHWAY ADMINISTRATION
Submit Application and Documents Online
1200 New Jersey Ave SE / HAHR - 50
Washington, District of Columbia 20590
United States
Next steps
You may check your application status by logging into USAJobs.com (Select "My USAJobs" and click "Applications". Within two weeks of the closing date, a Human Resources Specialist will evaluate your application. Qualified candidates will be referred to the hiring manager. Appropriate veteran's preference will be applied. If you are selected for an interview, the hiring agency will contact you directly. Once the position is filled, we will notify all applicants of their final status.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
ALL Applicants must provide a resume that fully supports the required specialized experience and was created within USA Jobs Resume Builder and respond to the vacancy questions by the closing date of the vacancy. Formatted resumes can be uploaded when you arrive at the DOT application system. For assistance with the resume builder, please visit: https://www.usajobs.gov/Help/how-to/account/documents/resume/build/
Transcripts are REQUIRED per the mandatory education requirement for the series, and also if you are applying based on education for the GS-11 grade.
Foreign education must be reviewed by an organization recognized by the U.S. Department of Education. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. For special instructions pertaining to foreign education and a list of organizations that can evaluate foreign education, see the Department of Education website.
If you are applying to an engineering position and are qualifying based on possessing a current Professional Engineer (PE) license, or passing the Engineer in Training (EIT) exam, please provide a copy of PE license or written documented proof of passing the EIT.
DISPLACED EMPLOYEES: If requesting consideration under the Career Transition Assistance Program (CTAP) or Interagency CTAP program (ICTAP), you must meet the well qualified standards for this vacancy (meeting minimum requirements for position and scoring at least an 85) and provide all of the following documents:
your most recent performance appraisal,
the proof of eligibility letter from the Agency, and
your most current SF-50, displaying current series and grade.
Displaced employees may be eligible for ICTAP or CTAP priority consideration.
Failure to submit any of the required documents by the closing date of the vacancy will result in your removal from consideration for this position. Please review your application prior to final submission and ensure you have submitted all appropriate documents. Uploading documents to USA Jobs does NOT ensure inclusion with your application to our system. You must verify that the documents are in the system with your application prior to final submission.
If you are relying on your education to meet qualification requirements:
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
You must submit a complete application package (including resume, vacancy questions and supporting documents) no later than 11:59 pm (EST) on the closing date of the announcement.
To begin, click the "Apply Online" button on the job announcement posting.
Follow the directions to register, submit all required documents and complete the assessment questionnaire.
You may review your saved application(s) at https://my.usajobs.gov.
If you are having difficulty applying online, please contact the DOT Automated Staffing Office via email at: Transjobs@dot.gov
DOT, FEDERAL HIGHWAY ADMINISTRATION
Submit Application and Documents Online
1200 New Jersey Ave SE / HAHR - 50
Washington, District of Columbia 20590
United States
Next steps
You may check your application status by logging into USAJobs.com (Select "My USAJobs" and click "Applications". Within two weeks of the closing date, a Human Resources Specialist will evaluate your application. Qualified candidates will be referred to the hiring manager. Appropriate veteran's preference will be applied. If you are selected for an interview, the hiring agency will contact you directly. Once the position is filled, we will notify all applicants of their final status.
Fair and transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
