Skip to main content
U.S. flag
Back to results

Civil Engineer/Agricultural Engineer

Department of Agriculture
Natural Resources Conservation Service
This job announcement has closed

Summary

This position is located in a USDA Natural Resources Conservation Services state, area, or field office within Wyoming.

The incumbent assists engineers and provides basic technical guidance for planning, design, installation, and maintenance of engineering phrases of soil and water conservation practices.

Overview

Help
Hiring complete
Open & closing dates
01/27/2023 to 02/09/2023
Salary
$37,696 to - $74,250 per year
Pay scale & grade
GS 5 - 9
Locations
Buffalo, WY
1 vacancy
Gillette, WY
1 vacancy
Powell, WY
1 vacancy
Remote job
No
Telework eligible
Yes—as determined by the agency policy.
Travel Required
Occasional travel - You may be expected to travel for this position.
Relocation expenses reimbursed
No
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
9
Supervisory status
No
Security clearance
Not Required
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Announcement number
23-DE-11788627-JR
Control number
702460600

Duties

Help
  • Plan and carry out the work, dealing with problems and deviations in work assignments in accordance with instructions, policies, previous training and accepted engineering practices and methods.
  • Coordinate and conduct the type, scope, and intensity of field investigations and surveys needed for the practice implementation.
  • Provide engineering assistance and direction to the assigned area and helps provide engineering continuity and coordination across areas.
  • Develop cost estimates for assigned designs.
  • Facilitate necessary quality assurance reviews of planned, designed, and constructed engineering projects in the assigned area.

Requirements

Help

Conditions of employment

  • You must be a US Citizen or US National.
  • Males born after 12/31/1959 must be Selective Service registered or exempt.
  • Subject to satisfactory adjudication of background investigation and/or fingerprint check. If selected you will be sent instructions on obtaining fingerprints. Please note we are not able to reimburse any fees incurred for fingerprints.
  • Successful completion of one-year probationary period, unless previously served.
  • Direct Deposit: Per Public Law 104-134 all Federal employees are required to have federal payments made by direct deposit to their financial institution.
  • Successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit E-Verify at https://www.e-verify.gov/.
  • Must possess and maintain a valid state motor vehicle operator's license for the type of vehicle(s) operated to perform the duties of this position.
  • Applicants must meet all qualifications and eligibility requirements by the closing date of the announcement.
  • Physical Demands: Some physical exertion such as long periods of standing, traversing steep slopes and rough constructions sites, recurring bending and stooping, and jumping across ditches. Must be able to lift and carry weigh up to 50 pounds.
  • Working Environment: Frequent trips to field sites involve exposure to construction equipment and the environment, and extreme temperatures of hot and cold. Protective gear such as hard hats, boots, and gloves may be necessary during site visits.
  • Working Environment: Exposure to noise levels common to construction sites with large earthmoving equipment. Exposure to disease carrying insects or irritating plants.

Qualifications

In order to be qualified for this position, you must meet the basic requirement AND minimum qualification requirements for the grade level(s) in which you apply.

BASIC REQUIREMENTS: You must meet one of the following:
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

  1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. (You must submit licensure or registration.)
  2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. (You must submit documentation)
  3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
  4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
MINIMUM QUALIFICATIONS: To be considered minimally qualified for this position, you must demonstrate that you have the required specialized experience and/or education for the respective grade level(s) in which you are applying:

GS-5: Applicants who meet the basic requirement are qualified at the GS-5 grade level.

GS-7: You must meet one of the following:
A. One full year of specialized experience, equivalent to at least the GS-5 grade level in the Federal service, performing duties such as:
  • Using engineering design and computer-aided design software to develop construction drawings and specifications;
  • Applying knowledge of hydraulics, structural design, and engineering geology prepare engineering designs and drawings;
  • Creating spreadsheets using information from databases; and
B. A bachelor's degree in engineering AND meet one of the following Superior Academic Achievement Provisions:
  1. Maintained a grade-point average of "B" (a GPA of 3.0 or higher) for all completed undergraduate courses, or those completed in the last two years of undergraduate study.
  2. Maintained a grade-point average "B+" (a GPA of 3.5 or higher) for all courses in your major field of study, or those courses in your major completed in the last two years of undergraduate study.
  3. Rank in the upper one-third of your class in the college, university, or major subdivision.
  4. Be a member of a national honor (other than freshman honor societies) recognized by the Association of College Honor Societies. Please submit a college transcript(s) showing your grade point average for all four years of undergraduate study, including all transferred courses. NOTE: GPA's are rounded to one decimal place. For example, 2.95 will round to 3.0 and 2.94 will round to 2.9. If more than 10 percent of your undergraduate course work (credit hours) were taken on a pass/fail or similar basis, your claim must be based on class standing or membership in an honor society.
C. One year (18 semester hours) of graduate level education in engineering or a closely related field that provided the knowledge, skills, and abilities necessary to successfully complete the work of the position.
D. A combination of specialized experience as described in 'A' and graduate level education as described in 'C' that, when combined, equal 100% of the total requirement.
E. Have successfully completed a five-year program of study of at least 160 semester hours leading to a bachelor's degree in engineering.
F. Have an engineering bachelor's degree AND have appropriate specialized experience as an Engineering Technician equivalent to grade GS-5 or higher.

GS-9: You must meet one of the following:
A. One full year of specialized experience, equivalent to at least the GS-7 grade level in the Federal service, performing duties such as:
  • Using engineering design and computer-aided design software to develop construction drawings and specifications;
  • Applying knowledge of hydraulics, structural design, water management and engineering geology prepare engineering designs and drawings;
  • Creating spreadsheets using information from databases;
  • Providing technical guidance and training to staff on engineering best practices; and
  • Making recommendations for changing criteria for engineering project to fit specific situations.
B. At least 2 years of progressively higher level graduate education leading to a master's degree or equivalent graduate degree OR master's degree or higher in engineering or a closely related field that provided the knowledge, skills, and abilities necessary to successfully complete the work of the position.
C. A combination of specialized experience as described in A and graduate level education as described in B that, when combined, equal 100% of the total requirement. (Please note that only graduate education in excess of the first 18 semester hours may be used in this calculation.)
D. A Bachelor's degree in engineering with Superior Academic Achievement and have one year of professional engineering experience. Professional engineering experience is defined as non-routine engineering work that required professional knowledge of engineering; professional ability to apply such knowledge to engineering problems; and positive and continuing development of professional knowledge and ability.
E. Completed a 5-year program of study of at least 160 semester hours leading to a bachelor's degree in engineering and have one year of professional engineering experience. Professional engineering experience is defined as non-routine engineering work that required professional knowledge of engineering; professional ability to apply such knowledge to engineering problems; and positive and continuing development of professional knowledge and ability.

Education

You must submit a copy of your college transcripts or a list of college courses with credit hours, dates completed, and grades received to verify all education requirements (i.e. substitution of education and/or basic education requirement). If a relevant course is not clearly qualifying (e.g. special topic, seminar, research, thesis, obscure or misleading course title, etc.), please submit an official course syllabi and/or detailed course description from the university/college for that particular course to ensure you are properly evaluated. Please note that qualifications determinations are based solely on the information submitted for each particular vacancy announcement. You must document all requirements on every vacancy; we cannot use previous determinations as a basis for rating. All required information must be received by the closing date of this announcement, and non-submission of all required documents/documentation will result in non-consideration. Unofficial transcripts will be accepted. This information must be received by the closing date of this announcement. Non-submission of these documents will result in non-consideration. Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications.

Foreign Education: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show that the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://www2.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Additional information

If you are selected for a position with further promotion potential, you will be placed under a career development plan, and may be non-competitively promoted if you successfully complete the requirements and if recommended by management. However, promotion is neither implied nor guaranteed.

This position may be eligible for telework within the local commuting area of the position and other flexible work arrangements. Other flexibilities are possible dependent upon availability and/or the position and its associated duties. Employee participation is at the discretion of the supervisor.

PLEASE NOTE: In the interest of filling these positions as efficiently as possible, we are requiring the following:

  • If called for an interview, applicants must be available to interview within 3 business days of being contacted.
  • If a tentative job offer is extended, selectee will have 2 business days in which to accept or decline.
  • Recruitment and/or relocation incentives may be authorized; Management may authorize superior qualifications & enhanced annual leave for applicants who are deemed to be highly qualified.
  • Relocation expenses may be authorized as allowable by Federal Travel Regulations (FTR) and USDA policy.
The Interagency Career Transition Assistance Plan (ICTAP) provides eligible displaced Federal competitive service employees with selection priority over other candidates for competitive service vacancies. If your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority if: 1) this vacancy is within your ICTAP eligibility; 2) you apply under the instructions in this announcement; and 3) you are found well-qualified for this vacancy. To be well qualified, you must satisfy all qualification requirements for the vacant position and rate equivalent to the Highly Qualified or better category using established category rating criteria. You must provide proof of eligibility with your application. Such proof may include a copy of your written notification of ICTAP eligibility or a copy of your separation personnel action form. Additional information about ICTAP eligibility is at: http://www.opm.gov/rif/employee_guides/career_transition.asp#ictap
The Career Transition Assistance Plan (CTAP) provides eligible surplus and displaced competitive service employees in the USDA with selection priority over other candidates for competitive service vacancies. If your Department of Justice component has notified you in writing that you are a surplus or displaced employee eligible for CTAP consideration, you may receive selection priority if: 1) this vacancy is within your CTAP eligibility, 2) you apply under the instructions in this announcement, and 3) you are found well-qualified for this vacancy. To be well qualified, you must satisfy all qualification requirements for the vacant position and rate equivalent to the Highly Qualified or better category using established category rating criteria. You must provide a copy of your written notification of CTAP eligibility with your application. Additional information about CTAP eligibility is at: http://www.opm.gov/rif/employee_guides/career_transition.asp#ctap

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

IN DESCRIBING YOUR EXPERIENCE, PLEASE BE CLEAR AND SPECIFIC. WE MAY NOT MAKE ASSUMPTIONS REGARDING YOUR EXPERIENCE. If your resume does not support your questionnaire answers, we will not allow credit for your response(s).

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Applications will be evaluated in accordance with Office of Personnel Management's (OPM) Delegated Examining Procedures and USDA policy using category rating. Applicants who meet basic minimum qualifications will be placed in one of three categories: Best Qualified, Well Qualified, or Qualified. Within these categories, applicants eligible for veteran's preference will receive selection priority over non-veterans. Category placement will be determined based on applicants' quality of experience and the extent they possess the following knowledge, skills, and abilities (KSA) or competencies:
General Engineering, Planning and Evaluating, Teamwork, and Technology Application

Your application, including the online Assessment Questionnaire, will be reviewed to determine if you meet (a) minimum qualification requirements and (b) the resume supports the answers provided to the job-specific questions. Your resume must clearly support your responses to all the questions addressing experience and education relevant to this position. Those determined to be in the best qualified category will be referred to the selecting official for consideration.

Note: If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your score may be adjusted to more accurately reflect your abilities, or you may be found ineligible. Please follow all instructions carefully. Errors or omissions may affect your rating. Providing inaccurate information on Federal documents could be grounds for non-selection or disciplinary action up to including removal from the Federal service.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.