Skip to main content
U.S. flag

Lead Engineering Technician (Aerospace), GS-0802-11/12 (MAP)

Department of Commerce
National Oceanic and Atmospheric Administration
This job announcement has closed

Summary

This position is located in the National Oceanic and Atmospheric Administration (NOAA), Office of Marine and Aviation Operations (OMAO), Aircraft Operations Center (AOC) with two vacancies in Lakeland, FL.

This position is also announced under vacancy number OMAO-AOC-2022-0021, which is open to all US Citizens or Nationals. You must apply to both announcements if you want to be considered for both.

Overview

Help
Reviewing applications
Open date: 07/26/2022
Closed date: 08/10/2022
Location
Work site options
Telework eligible
No
Remote job
No
Relocation expenses reimbursed
No
Salary
$66,214 - $103,176 per year
Pay scale & grade
GS 11 - 12
Promotion potential
12 - If you are selected for a position with further promotion potential, you may be non-competitively promoted if you perform successfully and if recommended by management.
Pay scale and grade determines the salary of the job.
Work schedule
Full-time
Travel Required
Occasional travel - Up to 20% of domestic or foreign travel may be required for this position.
Appointment type
Permanent
Occupations and job series
Supervisory status
No
Federal service type
This job is in the Competitive Service
Drug test
No
Security clearance
Other
Announcement number
OMAO-AOC-2022-0020
Control number
667352800

Videos

Duties

Help

As a Lead Engineering Technician (Aerospace), you will perform the following duties:

  • Conduct pre-flight, post-flight, acceptance inspection, special inspection, component replacement and operational checks on King Air Series 300 and/or DHC-6-300 aircraft for adequacy and completeness of work, ensuring airworthiness of aircraft.
  • Provide technical leadership in troubleshooting King Air Series 300 and/or DHC-6-300 aircraft discrepancies involving the airframe, powerplant, installed avionics and mission systems to assure proper function of all components and systems.
  • Conduct assessments of quality requirements such as contractor performance, system hardware and software conditioning, aircraft readiness, and procurement quality requirements.
  • Ensure all necessary paper documents, forms and logs are correctly completed as well as electronic logbook entries prior to, and after maintenance is performed.

These duties are described at the full performance level of the GS-12; the GS-11 is developmental leading to such performance.

Requirements

Help

Conditions of employment

  • Must be a U.S. Citizen or National to apply.
  • Required to pass a background investigation and fingerprint check.
  • Must be suitable for Federal employment.
  • Must be registered for Selective Service, if applicable (www.sss.gov).
  • Time-in-grade/band must be met by closing date of announcement.

Due to COVID-19, the agency is currently in an expanded telework posture. NOAA received notice of reintegration to occur on April 25, 2022.  As employees are permitted to return to the office, you will need to follow management’s guidelines on the expectation of reporting to the duty station listed on this announcement. You may be eligible to request to telework depending upon the terms of the agency’s telework policy.

This position requires a Low Risk Security Clearance.

NOTE:

* A one year probationary period may be required.

* Payment of relocation expenses is not authorized.

* This position is in the bargaining unit.

PHYSICAL REQUIREMENTS: 

The Engineering Technician performs inspections, repairs and adjustments:

  • In hard-to-reach places.
  • Requires one to climb, stand, stoop, lift, stretch, bend and work in tiring and uncomfortable positions for long periods of time.
  • Singularly lift parts and equipment that weigh up to fifty pounds.
  • Push and pull heavy items, such as but not limited to, tool boxes, aircraft jacks, work stands, external power carts, oxygen and nitrogen carts, etc.

WORK ENVIRONMENT:

The Engineering Technician's administrative duties are generally performed in an office environment. The work environment involves high risks with exposure to potentially dangerous situations or unusual environmental stress that require a range of safety and other precautions, e.g., working at great heights under extreme outdoor weather conditions, subject to possible physical attack or mob conditions, or similar situations where conditions cannot be controlled. Most aircraft maintenance is performed in non-environmentally controlled hangers, or is performed outdoors, especially when deployed from home station, in all types of weather conditions and is subject to the exposure to many hazards:   

  • Tropical heat. 
  • Sub-zero arctic cold. 
  • Frequent exposure to aircraft fluids, such as fuel, engine oil or hydraulic fluid which may irritate the skin or eyes. 
  • Frequent exposure to cleaning solutions, solvents and spray paint which may irritate the skin, eyes, and lungs. 
  • Frequent exposure to the possibility of cuts, burns, shocks, strains and broken bones. 
  • Frequent exposure to noise levels above 85 decibels. 
  • Fieldwork may be performed anywhere in the world under less than adequate living and working conditions.

Qualifications

(Continued from the Requirements section)

CONDITIONS OF EMPLOYMENT:

  • FAA Airframe and Powerplant rating.
  • FAA Inspection Authorization rating. 
  • Ten years' general experience as an Aircraft Maintenance Technician. 
  • Five years' experience on the assigned primary aircraft. 
  • Two years' experience working AOC aircraft types (other than primary assigned aircraft). 
  • Five years' experience with the requisition, acquisition and inventory of aircraft parts, supplies and services. 
  • Travel (away from Lakeland) for indefinite periods as required by the needs of the Aircraft Maintenance Branch and/or the Aircraft Operations Center. 
  • Valid State Driver's License.  

QUALITY RANKING FACTOR:

Applicants will receive additional weight on their overall rating if they possess the additional experience and certification(s) below: (Failure to provide proof of the below with your application may result in the removal of the additional weight to your overall rating.)

  • Possessing a current and valid Federal Aviation Administration (FAA) Airframe and Powerplant rating.
  • Possessing a current and valid FAA Inspection Authorization rating.

Applicants must meet ALL application requirements, to include a complete online resume, by 11:59 p.m. EASTERN TIME (ET) on the closing date of this announcement.

QUALIFICATIONS:

Qualification requirements in the vacancy announcements are based on the U.S. Office of Personnel Management (OPM) Qualification Standards Handbook, which contains federal qualification standards.  This handbook is available on the Office of Personnel Management's website located at: https://www.opm.gov/policy.

EDUCATION:   There is no positive education requirement for this position.

SPECIALIZED EXPERIENCE: Applicants must possess one year of specialized experience equivalent in difficulty and responsibility to the next lower grade level in the Federal Service.  Specialized experience is experience that has equipped the applicant with the particular competencies/knowledge, skills and abilities to successfully perform the duties of the position.  This experience need not have been in the federal government.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations e.g., professional; philanthropic, religious; spiritual; community, student, social). Volunteer work helps build critical competencies; knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.  You will receive credit for all qualifying experience, including volunteer experience.

To qualify at the GS-11 level: 

SPECIALIZED EXPERIENCE: Applicants must possess one full year (52 weeks) of specialized experience equivalent to the GS-10 in the Federal service. Specialized experience MUST include all of the following:

  • Participating in inspecting, troubleshooting, repairing and/or performing preventive maintenance on King Air Series 300 and/or DHC-6-300 aircraft;
  • Assisting in monitoring completion and quality control of maintenance performed on aircraft; and
  • Assisting in determining suitability and certifying the airworthiness of aircraft.

To qualify at the GS-12 level: 

SPECIALIZED EXPERIENCE: Applicants must possess one full year (52 weeks) of specialized experience equivalent to the GS-11 in the Federal service. Specialized experience MUST include all of the following:

  • Providing technical guidance and/or direction to an aircraft maintenance staff and ensuring compliance with operational requirements and procedures;
  • Assisting in scheduling and verifying King Air Series 300 and/or DHC-6-300 aircraft inspections and follow-up maintenance and/or repairs;
  • Participating in performing preventive maintenance and quality assurance activities for King Air Series 300 and/or DHC-6-300 aircraft; and
  • Assisting in developing and/or modifying aircraft maintenance operating procedures and practices.

Education

Substitution of education for specialized experience is not applicable to this vacancy.

Additional information

CTAP and ICTAP candidates will be eligible if it is determined that they have exceeded the minimum qualifications for the position by attaining at least a rating of 85 out of 100.  Information about CTAP and ICTAP eligibility is on the Office of Personnel Management’s Career Transition Resources website at: http://www.opm.gov/policy-data-oversight/workforce-restructuring/employee-guide-to-career-transition/.

CTAP applicants MUST submit the following documents:

  1. A copy of your specific RIF notice; notice of proposed removal for failure to relocate; a Certificate of Expected Separation (CES); or certification that you are in a surplus organization or occupation (this could be a position abolishment letter, a notice eligibility for discontinued service retirement, or similar notice).
  2. A copy of your SF-50 “Notification of Personnel Action”, noting current position, grade level, and duty location;
  3. A copy of your latest performance appraisal including your rating; and
  4. Any documentation from your agency that shows your current promotion potential.

ICTAP applicants MUST submit the following documents:                   

  1. A copy of your RIF separation notice; notice of proposed removal for failure to relocate; notice of disability annuity termination; certification from your former agency that it cannot place you after your recovery from a compensable injury; or certification from the National Guard Bureau or Military Department that you are eligible for disability retirement;
  2. A copy of your SF-50 “Notification of Personnel Action” documenting your RIF separation, noting your positions, grade level, and duty location, and/or Agency certification of inability to place you through RPL, etc;
  3. A copy of your latest performance appraisal including your rating; and
  4. Any documentation from your agency that shows your current promotion potential.

Non-Competitive Reinstatement to a Higher Grade/Band than Previously Held MUST submit the following documents:

1.       SF-50, “Notification of Personnel Action: you must provide the most current Notification of Personnel Action (Form SF-50) that verifies career/career-conditional status, title, series, and highest grade level held on a permanent basis for your previous position. (do not submit an Award SF-50) AND, the SF-50 that verifies your separation date; AND.

2.       Performance Appraisal - most recent performance appraisal showing the official rating of record, signed by a supervisor, or statement why the performance appraisal is unavailable. Do not submit a performance plan that does not include this information.

NOAA participates in e-Verify.  E-Verify is an Internet based system operated by the Department of Homeland Security (DHS) in partnership with the Social Security Administration (SSA) that enables participating employers to electronically verify the employment eligibility of their newly hired employees.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

We will review your resume, optional cover letter and supporting documentation to determine if you meet the minimum qualifications for the position.  If you meet the minimum qualifications stated in the vacancy announcement, we will compare your resume, optional cover letter and supporting documentation to your responses on the scored occupational questionnaire (True/False, Yes/No, Multiple Choice questions).  However, your resume or optional cover letter must support your responses to the scored occupational questionnaire, or your score may be lowered.  The best-qualified candidates will be identified for referral to the hiring manager and may be invited for an interview.

The scored occupational questionnaire will evaluate you on the following competencies; please do not provide a separate written response:

ALL GRADES:

  • Ability to problem solve and provide assistance in troubleshooting, investigating, and to identify solutions to aircraft mechanical, electrical and avionics issues.
  • Ability to document maintenance before and after completion; and complete electronic logs and forms.

GS-11 ONLY:

  • Ability to assist in inspections to determine suitability and certify airworthiness of aircrafts.
  • Ability to assist in aircraft modifications, alterations, scheduled and unscheduled maintenance.
  • Knowledge of the principles, methods, of quality assurance and quality control used to ensure aircraft and ancillary systems and equipment meets functional requirements and standards.

GS-12 ONLY:

  • Ability to conduct inspections to determine suitability and certify airworthiness of aircraft.
  • Ability to perform aircraft modifications, alterations, scheduled, unscheduled and preventative maintenance and certify the work performed.
  • Knowledge of the principles, compliance methods, and implementation techniques of quality assurance.
  • Ability to ensure aircraft and ancillary systems and equipment meet functional requirements and standards.

Due weight shall be given to performance appraisals and awards in accordance with 5 CFR 335.103(b)(3), during the interview/selection process conducted by the hiring manager. If referred, all relevant documents including performance appraisals and awards submitted with your application package will be forwarded to the hiring official for review.


You may preview questions for this vacancy.

National Oceanic and Atmospheric Administration

Agency contact information

Paul Lilley
Phone
703-662-5499
Fax
000-000-0000
Email
Paul.Lilley@noaa.gov
Address
NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION
Office of Human Capital Services
1305 East West Highway
Room 1713
Silver Spring, Maryland 20910
United States

Visit our careers page

Learn more about what it's like to work at National Oceanic and Atmospheric Administration, what the agency does, and about the types of careers this agency offers.

https://www.youtube.com/embed/EBBnYBiY1rc

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.