Skip to main content
U.S. flag
Back to results

Interdisciplinary - DIRECT HIRE

Department of the Army
U.S. Army Corps of Engineers
Los Angeles District Engineering Division, Engineering Support Branch
This job announcement has closed

Summary

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for certain personnel of DoD workforce to recruit and appoint qualified candidates to positions in the competitive service.

About the Position: This position serves as a Specifications Engineer in the Los Angeles District Engineering Division Engineering Support Branch.
This is an open continuous announcement.
The first cut-off date is 08/30/2021.
Other certificates may be issued as needed.

Overview

Help
Hiring complete
Open & closing dates
08/17/2021 to 02/22/2022
Salary
$88,488 to - $115,039 per year
Pay scale & grade
GS 12
Location
1 vacancy in the following location:
Los Angeles, CA
Telework eligible
Yes—as determined by the agency policy.
Travel Required
Occasional travel - You may be expected to travel for this position.
Relocation expenses reimbursed
Yes—You may qualify for reimbursement of relocation expenses in accordance with agency policy.
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
None
Supervisory status
No
Security clearance
Not Required
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Announcement number
WTKC21230270HWS
Control number
610826300

This job is open to

Help

Clarification from the agency

This is a Direct Hire Authority (DHA) solicitation for Certain Personnel of the DoD Workforce

Duties

Help
  • Plan, coordinate, direct and review the work of preparing contract specifications and plans for a variety of civil and military works construction including flood mitigation facilities, site development, roads, structures, coastal infrastructure.
  • Prepare and direct the performance of review of plans and sections of technical provisions of specifications prepared by other districts and Corps offices performing as Architect-Engineers (A-Es)
  • Participate in timely and thorough review of A-E specifications effort through all of the design submittal stages to assure adequate and complete preparation of specifications by A-Es.
  • Provide engineering information and guidance as requested by other sections, units, and field offices for the checking of shop drawings and material and equipment submittal information for compliance with contract requirements.
  • Perform review of specifications and contract drawings for biddability, constructability, and operability criteria (BCOES) and requirements of the various projects designed and/or administered by the District.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • Appointment requires business travel which is approximately 10% of the time.
  • This position requires a valid driver's license.
  • Pursuant to EO 14043, all Federal employees, regardless of duty location or work arrangement, must be fully vaccinated for COVID-19 by November 22, 2021, or before entrance on duty if after November 22, subject to exceptions as required by law.
  • If selected, the agency will provide information regarding what documentation is needed and how to request any legally required exceptions from this requirement.
  • Proof of vaccination will be required. To ensure compliance with this mandate, review the vaccination requirements, to include timelines for receiving required doses, at the following: https://www.saferfederalworkforce.gov/faq/vaccinations/

Qualifications

Who May Apply: US Citizens

In order to qualify, you must meet the educations and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

You must meet either the basic requirement for Architecture or the basic requirement for Engineering.

Basic Requirement for Architecture, GS-0808:
A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture.

Basic Requirement for Engineering, GS-0801/0810/0830/0850:
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

GS-12: Specialized Experience: One year of specialized experience which includes 1) Writing new construction specifications using an automated system for preparing standardized facility construction specifications such as SpecsIntact; 2) Preparing solicitation packages and amendments to solicitations; AND 3) Performing milestone reviews of plans, specifications, and bidding documents.

This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).
For the GS-12 grade, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Additional information

  • Incentives may be offered if determined to be in the best interest of the agency.
  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • Two year trial/probationary period may be required.
  • Direct Deposit of Pay is required.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a Career Program (CP) 18 - Engineers and Scientists position.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.gsa.gov/cdnstatic/FTR%20Bulletin%2018_05%20Relocation%20Allowances_0.pdf for more information.
  • If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application.
  • Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. If you are minimally qualified, your résumé and supporting documentation will be compared against your responses to the assessment questionnaire to determine your level of experience. If, after reviewing your résumé and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.