Skip to main content
U.S. flag
Back to results

CIVIL ENGINEER (DIRECT HIRE AUTHORITY)

Department of the Interior
Bureau of Land Management
This job announcement has closed

Summary

Two positions are being filled at this time, however, additional positions may be filled from this announcement if they become available.

This is a Direct-Hire advertisement. Veterans preference is not applicable to this advertisement. Learn more about this authority at: Direct Hire Authority

Overview

Help
Hiring complete
Open & closing dates
02/23/2021 to 03/23/2021
Salary
$77,488 to - $109,792 per year
Pay scale & grade
GS 12
Locations
2 vacancies in the following locations:
Alturas, CA
Arcata, CA
Cedarville, CA
Redding, CA
Telework eligible
No
Travel Required
Occasional travel - You may be expected to travel for this position.
Relocation expenses reimbursed
Yes—Yes Please see ADDITIONAL INFORMATION Section to see which locations are offering Relocation Expenses Paid. Travel and relocation expenses will be paid consistent with the Federal Travel Regulation, Chapter 302, and Departmental policy. Selectee will be responsible for tax obligations related to payments for moving expenses - 2017 Tax Cuts and Job Act, Public Law 115-97. See "Other" section for additional information on 2017 Tax Cuts as related to PCS.
Appointment type
Permanent
Work schedule
Full-Time
Service
Competitive
Promotion potential
12
Job family (Series)
Supervisory status
No
Security clearance
Other
Drug test
No
Position sensitivity and risk
High Risk (HR)
Trust determination process
Announcement number
CADHA-21-11002334-VG
Control number
593190700

This job is open to

Help

Clarification from the agency

All U.S. Citizens - No previous federal service is required. This position is being advertised under an OPM government-wide Direct Hire authority. CTAP and ICTAP candidates in the local commuting area.

Duties

Help
  • Perform engineering analyses to include performing/coordinating technical planning activities; data collection; modeling/data analyses; analyses of site location and/or conditions; risk estimation and analyses; or analyses of instrumentation data.
  • Make engineering recommendations and/or decisions based on engineering analysis. Specialty area analyses can include: Construction Management, Geotechnical, Highway, Hydraulics, Hydrologic, and Structural.
  • Creating, performing, reviewing, checking, and/or modeling engineering designs and contributing to the design and modifications of new and existing complex features.
  • Provide technical approval as the engineer in responsible charge of design activities and engineering decisions.
  • Develops project guidelines, protocols, and procedures that are specific to the project; and may review for comment or propose draft Bureau directives, standards, and policies.
  • Make oral presentations of technical documentation at coordination meetings, design briefings, or other technical briefings, in some cases in support of enforcement activities as part of Federal oversight of regulatory programs.
  • Serve as senior engineer on Comprehensive Reviews for high and significant-hazard dam examinations in accordance with Bureau and Department policies, directives, and standards.
  • Provide technical mentorship, guidance and training to engineers and technicians and other internal and external stakeholders. May sign documents for technical approval in accordance with Bureau and Department policies, directives, and standards.
  • Coordinates and communicates with other groups and offices throughout the organization such as program and project managers, engineering, finance, maintenance, permit compliance, and acquisition.
  • Works with Contracting Officer/Grants Officer/ A warding Official to implement and administer a variety of assigned contracts.
  • Oversees development and operation of engineering data collection systems directly and/or in coordination with other government agencies and non-federal sources.
  • Participates on and/or leads technical work groups or teams.

Requirements

Help

Conditions of employment

  • U.S. Citizenship is required.
  • Be sure to read the How to Apply and Required Documents Sections.
  • You cannot hold an active real estate license: nor can you have an interest or hold stocks in firms with interest in Federal Lands.
  • Direct Deposit Required.
  • Appointment will be subject to a favorably adjudicated background/suitability investigation/determination.
  • Your resume must contain enough information to show that you meet the qualification requirements as defined in the announcement. In addition, your responses to the questions must adequately reflect in your resume.
  • May require a one year probationary period.

Qualifications

Selective Placement Factors: This position requires a special qualification that has been determined to be essential to perform the duties and will be used as a screen out element. Those who do not provide evidence they possess the following selective factor(s) will be rated not qualified:

  • Professional Engineer (PE) license that is accepted and has reciprocity throughout the States.
Proof of such license must be submitted at the time of application.

In order to be rated as qualified for this position, we must be able to determine that you meet the qualification requirements - please be sure to include this information in your resume. No assumptions will be made about your experience.

In addition to the basic entry requirement identified, applicants must also meet specialized experience requirements - please be sure to include this information in your resume. To be creditable, this experience must have been equivalent in difficulty and complexity to the next lower grade of the position to be filled.

To qualify for the GS-12: This experience must have been equivalent in difficulty and complexity to the next lower grade (GS-11). Examples of specialized experience may include: developing and advising on construction submittals; conducting field inspections of site features on proposed design sites and for ongoing construction projects to define site specific problems and recommend solutions; developing engineering plans, analysis, specifications, designs and layouts for a variety of Civil Engineering projects. Reviewing, advising, and approving of construction submittals; conducting field inspections of site features on proposed design sites and for ongoing construction projects to define site specific problems and recommend solutions; developing engineering plans, analysis, specifications, designs and layouts for a variety of Civil Engineering projects.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

You must meet all qualification requirements by the closing date of the announcement.

Physical Demands: The work regularly combines both office and field assignments. Field work requires physical exertion, such as long periods of standing, or recurring and considerable walking, stooping, bending, crouching, crawling, and climbing such as in regular and periodic construction activities and field inspections. Work may also include frequent lifting of moderately heavy items weighing less than 50 pounds. Field assignments may also involve driving motor vehicles to work sites, some of which may be remote, and include overnight stays in remote locations.

Work Environment: The work is usually performed in an office setting. However, work time may also be spent periodically visiting field sites. Field site visits are typically performed in either an outdoor setting subject to weather changes, diverse terrain, and safety hazards associated with working around complex features and/or construction, or an industrial setting subject to noise, fumes, and moving machinery. Both settings may require the use of personal protective equipment.

The work involves regular and recurring exposure to moderate risks, discomforts, and unpleasantness such as: high noise levels, infectious materials, or toxic or irritating chemicals; travel in safety approved small aircraft and water craft; high winds and low or high temperatures; infestation of dangerous reptiles or poisonous plants, snakes, or insects; adverse weather conditions; noxious fumes; flammable liquids; or radiation. The work involves performing tasks in close proximity to rotating heavy mechanical and electrical machinery and may involve working within confined spaces for extensive periods of time. Special safety precautions such as protective clothing and gear are necessary. Safety precautions and protocols are observed at all times and the incumbent complies with safety instructions and regulations and ensures individual and others' safety by promptly reporting unsafe acts, unsafe conditions, and accidents to the supervisor.

Education

This position has a basic entry requirement which requires either:

A) Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

-OR-

B) Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1) Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence
provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2) Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.

3) Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.

4) Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior.

If using education to qualify, you must submit copies of all transcripts or a list of college courses that include hours and grades from an accredited U.S. college/university. See Required Documents section for more information.

Additional information

DOI uses E-Verify to confirm employment eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit E-Verify.

Career Transition Assistance Plan (CTAP)/lnteragency Career Transition Assistance Program (ICTAP): These programs apply to employees who have been involuntarily separated from a Federal service position within the competitive service or Federal service employees whose positions have been deemed surplus or no longer needed. To receive selection priority, you must: 1) meet CTAP or ICTAP eligibility criteria; 2) be rated well qualified for the position with a score of 90 or above; and 3) submit the appropriate documentation to support your CTAP or ICTAP eligibility. For more information: CTAP or ICTAP.

Males born after 12/31/59 must be registered for Selective Service.

Permanent Change of Station (PCS) is authorized for one vacancy in the Northern California District located in one of the following locations: Alturas, Arcata, Cedarville, Redding, Susanville, OR Sacramento, CA.

Permanent Change of Station (PCS) is NOT authorized for the second vacancy for the California State Office in the following location: Sacramento, CA

Tax Law Impact for PCS: Moving expenses reimbursement is a taxable benefit. However, the Federal Travel Regulation 18-05 issued by General Services Administration has authorized agencies to use the Withholding Tax Allowance and Relocation Income Tax Allowance to pay for "substantially all" of the increased tax liability resulting from the "2018 Tax Cuts and Jobs Act" for certain eligible individuals.

BLM may use certain incentives, currently offered by the Federal government, to attract high quality applicants.

The official worksite for the selectee is the duty station identified in this vacancy announcement. The selectee will typically report to this duty location on a regular and recurring weekly basis. The selectee may be allowed to telework with supervisor approval.

If you are unable to apply online or need to fax a document, you do not have in electronic form; view the following link for information regarding an Alternative Application.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the job opportunity announcement closes, your resume and all supporting documents will be reviewed by HR to determine your eligibility for Federal employment and your qualifications for this position specifically.

Because this vacancy will be filled through OPM's Direct Hire Authority, Veterans Preference and traditional rating and ranking of applicants do not apply to positions filled under this announcement. Applications received as a result of job fairs, recruitment events, and emergency hiring mechanisms in support of this hiring initiative will also be accepted during the duration of the announcement. All qualified candidates will be referred for consideration; the hiring office may conduct interviews at their discretion.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.