Skip to main content
U.S. flag
Back to results

Civil Engineer

Department of Agriculture
Natural Resources Conservation Service
This job announcement has closed

Summary

Direct Hire Authority: This position is being filled through the Office of Personnel Management (OPM) Direct-Hire Authority for this occupation.

Incumbent provides technical guidance and leadership in the overall construction, planning, design, installation, and maintenance of the engineering phases of a project.

This recruitment is to fill positions with the Easement Section and the Northwest Area. Please see Additional Information below.

Overview

Help
Hiring complete
Open & closing dates
09/30/2020 to 10/14/2020
Salary
$76,721 to - $99,741 per year
Pay scale & grade
GS 12
Locations
Few vacancies in the following locations:
Fort Smith, AR
Jonesboro, AR
Little Rock, AR
Lonoke, AR
Telework eligible
Yes—as determined by the agency policy.
Travel Required
Occasional travel - You may be expected to travel for this position.
Relocation expenses reimbursed
Yes—Relocation expenses may be authorized as allowable by Federal Travel Regulations (FTR) and USDA policy.
Appointment type
Permanent
Work schedule
Full-Time
Service
Competitive
Promotion potential
None
Job family (Series)
Supervisory status
No
Security clearance
Not Required
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Announcement number
NRCS-20-10910685-DHA-AR-DA
Control number
580372800

This job is open to

Help

Clarification from the agency

Applications will be accepted from any U.S. citizen. Direct Hire Authority will be used to fill this position. Veterans Preference and traditional rating and ranking of applicants does not apply to this vacancy.

Duties

Help
  • Implements corporate decisions, guidance, laws, regulations, and policy in the development of the project and intermediate products in support of the project.
  • Develops a preliminary plan of study, compiles pertinent basic engineering data and evaluates prior reports and investigations concerning study area(s).
  • Interprets plans and specifications for contractors, solving problems at a local level to ensure proper interpretation of specifications. Ensures designs meet approval criteria.
  • Plans and conducts pre-bid site showing, approves construction schedules, monitors work for compliance with contract requirements, verifies the accuracy of invoices and prepares receiving reports for plan estimates.
  • Leads the quality assurance program, oversees the government inspectors, recommends contract modifications.
  • Conducts site investigations and feasibility studies, field checks structural works of improvement designs which are prepared/approved by the State Conservation Engineer (SCE) prior to contracting.
  • Recommends changes in designs, specifications, and schedules to accommodate conditions at construction site and/or to expedite construction.
  • Makes periodic quality reviews of notes, drawings, designs, and installations for compliance with policies, procedures, and/or specifications.
  • Reviews and checks engineering planning, design, and construction work of NRCS field staff with lower Engineering Job Approval Authority.
  • Coordinates and conducts necessary quality assurance reviews of planned, designed, and constructed engineering projects.
  • Works within a team concept to develop and implement ways to improve the efficiency, effectiveness, and quality of the products and/or services provided to internal and external customers.

Requirements

Help

Conditions of employment

  • You must be a US Citizen or US National.
  • Males born after 12/31/1959 must be Selective Service registered or exempt.
  • Subject to satisfactory adjudication of background investigation and/or fingerprint check.
  • Successful completion of one-year probationary period, unless previously served.
  • Direct Deposit: Per Public Law 104-134 all Federal employees are required to have federal payments made by direct deposit to their financial institution.
  • Successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit E-Verify at https://www.e-verify.gov/.
  • Must possess and maintain a valid state motor vehicle operator's license for the type of vehicle(s) operated to perform the duties of this position.

Qualifications

Applicants must meet all qualifications and eligibility requirements by the closing date of the announcement including specialized experience and/or education, as defined below.

Basic Education Requirement:
Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree be in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET) http://main.abet.org/aps/accreditedprogramsearch.aspx as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics; OR

Combination of Education and Experience: college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

  1. Professional registration or licensure--Current registration as an Engineer Intern (El), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Boards eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
  2. Written Test-Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico.
  3. Specified academic courses-Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
  4. Related curriculum-Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provide the applicant has had a least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering.

In addition to meeting one of the Basic Requirements listed above, applicants must meet the following Minimum Qualifications Requirement in order to be considered:
Specialized Experience: To qualify for the GS-12 level, you must possess at least one year of specialized experience equivalent to the GS-11 level or higher in Federal service, or comparable experience not gained through Federal service. Specialized experience is defined as: Provide professional engineering services in planning, design and construction of conservation practices that address natural resource protection; and/or coordinating and conducting engineering quality assurance checks through site investigations and feasibility studies.

Note: There is no education substitution for the GS-12 level.

For more information on the qualifications for this position, click here: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

You must submit a copy of your college transcripts or a list of college courses with credit hours, dates completed, and grades received to verify all education requirements (i.e. substitution of education and/or basic education requirement). If a relevant course is not clearly qualifying (e.g. special topic, seminar, research, thesis, obscure or misleading course title, etc.), please submit an official course syllabi and/or detailed course description from the university/college for that particular course to ensure you are properly evaluated. Please note that qualifications determinations are based solely on the information submitted for each particular vacancy announcement. You must document all requirements on every vacancy; we cannot use previous determinations as a basis for rating. All required information must be received by the closing date of this announcement, and non-submission of all required documents/documentation will result in non-consideration. Unofficial transcripts will be accepted. This information must be received by the closing date of this announcement. Non-submission of these documents will result in non-consideration.

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Applicants must, therefore, only report attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Applicants can verify accreditation via this link. All education claimed by applicants will be verified accordingly. Important: If you are using foreign education to meet qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education. Click on this link for more information.

Additional information

  • This recruitment is to fill position(s) for the Wetland Reserve Program Engineer with the Easement Section located in Little Rock. This recruitment is also to fill position(s) as the Project Engineer for the Northwest Area with possible duty locations of Fort Smith, Jonesboro, Lonoke, or Little Rock.
  • Location Consideration: You may select up to three locations.
  • Locality Pay: The salary for each location may vary depending on locality. Locality tables my be found at https://www.opm.gov/policy-data-oversight/pay-leave/salaries-wages/.
  • Multiple positions may be filled from this announcement.
  • Recruitment and/or relocation incentives may be authorized.
  • Career Transition Assistance Plan (CTAP), Reemployment Priority List (RPL), or Interagency Career Transition Assistance Plan (ICTAP): Visit the OPM website for information on how to apply as a CTAP, RPL, or ICTAP eligible. To exercise selection priority for this vacancy, CTAP/RPL/ICTAP candidates must meet the basic eligibility requirements and all selective factors. CTAP/ICTAP candidates must be rated and determined to be well qualified (or above) based on an evaluation of the competencies listed in the How You Will Be Evaluated section. When assessed through a score-based category rating method, CTAP/ICTAP applicants must receive a rating of at least 85 out of a possible 100.
  • This position is eligible for telework within the local commuting area of the position and other flexible work arrangements. Employee participation is at the discretion of the supervisor.
  • Physical Demands: The work requires some physical exertion such as long periods of standing, traversing steep slopes and rough construction sites, requiring bending and stooping, jumping across shallow ditches, walking in soft, muddy and slippery conditions, and lifting and carrying equipment and samples that may weigh up to 50 pounds.
  • Work Environment: Work is typically performed in an office setting. Frequent trips to field sites involve exposure to construction equipment and the environment, and extreme temperatures of hot and cold.
  • PLEASE NOTE: In the interest of filling these positions as efficiently as possible, we are requiring the following:
    • If called for an interview, applicants must be available to interview within 3 business days of being contacted.
    • If a tentative job offer is extended, selectee will have 2 business days in which to accept or decline.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Applications will be evaluated in accordance with Office of Personnel Management's (OPM) Delegated Examining Procedures and USDA policy using category rating. Applicants who meet basic minimum qualifications will be placed in one of three categories: Best Qualified, Well Qualified, or Qualified. Within these categories, applicants eligible for veteran's preference will receive selection priority over non-veterans. Category placement will be determined based on applicants' quality of experience and the extent they possess the following knowledge, skills, and abilities (KSA) or competencies:

  • Assigning, Evaluating, and Monitoring Work, Conservation Planning - Financial Assistance Programs Management, Customer Service, Data Collection and Analysis, Design, Developing Others, Development of Alternatives - Decision Support, Problem Identification, and Quality Assurance

Your application, including the online Assessment Questionnaire, will be reviewed to determine if you meet (a) minimum qualification requirements and (b) the resume supports the answers provided to the job-specific questions. Your resume must clearly support your responses to all the questions addressing experience and education relevant to this position. Those determined to be in the best qualified category will be referred to the selecting official for consideration.

Note: If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your score may be adjusted to more accurately reflect your abilities, or you may be found ineligible. Please follow all instructions carefully. Errors or omissions may affect your rating. Providing inaccurate information on Federal documents could be grounds for non-selection or disciplinary action up to including removal from the Federal service.

Clicking the link below will present a preview of the application form; i.e. the online questionnaire. The application form link below will only provide a preview and does not initiate the application process. To initiate the online application process, click the "Apply" button to the right.

To view the application form, visit: https://apply.usastaffing.gov/ViewQuestionnaire/10910685

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.