Clarification from the agency

Open to Area 1 ONLY. DEFINITIONS FOR AREAS OF CONSIDERATION IN ADDITIONAL INFORMATION.

Position Description # D1634000

This position is located in an Air National Guard Aviation Wing, Maintenance Group, Maintenance Squadron, Propulsion Element. The purpose of this position is to supervise workers, either directly or through one or more subordinate leaders in accomplishing the work of the Propulsion Element and to perform associated non-supervisory work. The occupation and non-supervisory grade level which best reflects the nature of the overall work operations supervised is Aircraft Engine Mechanic, WG-8602-10.

Description of Duties:

(1) Planning. Plans weekly or monthly work schedules and sequence of operations. Establishes deadlines and priorities based on established general schedules, methods and policies. Determines skills, materials and equipment required to do the work. Participates in the initial planning of current and future work schedules and development of budget requests. Provides workload data, estimates, information on staffing needs, and recommendations as the scheduling of projected work.

(2) Work Direction. Assigns tasks to be performed. Explains work requirements, methods, and procedures. Instructs subordinates on new procedures or methods and provides assistance on difficult or new problem areas. Reviews work in progress or on completion. Makes adjustments as necessary to effectively and economically accomplish the work. Notes and investigates work related problems and independently implements corrective actions which can be taken without affecting work operations controlled by other supervisors. Assures that equipment and materiel is available when needed. Coordinates work with other work units.

(3) Administration. Recommends and participates in the selection of personnel to fill vacancies. Schedules and approves leave of subordinates. Sets performance requirements and makes formal and informal performance appraisals. Determines training needs of subordinates and arranges for its accomplishment. Counsels with employees regarding work related problems. Adjusts informal complaints through discussions with employees and union representatives. Takes informal corrective action on conduct or performance problems. Initiates proposals for disciplinary action where needed. Works to achieve the objectives of government-wide programs and policies, e.g., equal employment opportunity and labor management relations. Promotes the participation of subordinates in programs such as the suggestion program, cost reduction program, etc. Ensures that regulations governing safety and housekeeping are observed. Maintains production reports and records. Periodically reviews position descriptions of subordinates for currency and accuracy. Initiates or participates in review and improvement of work methods, organizational features, and the structuring of positions to eliminate unnecessary positions and achieve optimum content in those remaining.

(4) Performs the non-supervisory work of the Propulsion Element.

(5) Implements safety regulatory requirements. Ensures that subordinates wear appropriate safety equipment and follow pertinent safety precautions.

(6) Prepares for and participates in various types of readiness evaluations, inspections, mobilization and command support exercises. Performs such additional duties as structural fire fighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operation, maintenance of facilities and equipment, and/or serves as a team member to cope with natural disasters or civil emergencies.

(7) Performs other duties as assigned.

Conditions of employment

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in military assignment in WV's National Guard, and is required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Male applicants born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered, or you are not eligible for appointment in this agency.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.
• U.S. Citizenship is required.
• Required to obtain and maintain a satisfactory security clearance, AND, as a minimum, a completed National Agency Check (NAC) prior to assignment.
• The agency will provide additional information regarding what information or documentation will be needed and how you can request of the agency a legally required exception from this requirement.

Qualifications

MINIMUM MILITARY GRADE: E-7 MAXIMUM MILITARY GRADE: E-8

Your rank MUST be included somewhere within your resume.

You must fully substantiate in your own words that you meet the requirements listed below. When explaining minimum requirements and specialized experience you must give examples. Do not copy from the vacancy announcement or the position description. Explain it in your own words and give examples to be considered for this vacancy.

All personnel applying for this position who do not meet the minimum military grade requirement MUST provide the proper signed memorandum from your respective Military Personnel Office (MILPO for ARNG, FSS for ANG) to prove eligibility to obtain the required grade upon accepting the position. All personnel who exceed the maximum military rank must provide a memorandum explaining if selected for this position, you will accept an administrative reduction in rank. The memorandum must be submitted WITH your application to be considered for this position.

MINIMUM REQUIREMENTS: Experience or training that has provided the ability to perform assembly and disassembly operations and make prescribed modifications to aircraft engines, engine assemblies, and accessories in accordance with technical specifications, procedures, and requirements. Experience using hand and power tools common to the trade.

SPECIALIZED EXPERIENCE: In addition to the journeyman level knowledge, experience demonstrating the ability to plan, direct, and organize work assignments of lower grade personnel. Experience which required the review of work requirements and establishing priorities to meet deadlines. Experience that provided knowledge of various lines of work performed by this function. Experience which demonstrates the ability to supervise or the potential to perform such duties as evidenced by the ability to communicate knowledge of general supervisory concepts, and knowledge of shop processes. Experience in adapting existing equipment and techniques to new situations.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your documents will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found eligible, you will be referred to the selecting official for employment consideration.