Skip to main content
U.S. flag
Back to results

ENGINEERING TECHNICIAN (CIVIL)

Department of the Army
U.S. Army Corps of Engineers
ENGINEERING & CONSTRUCTION DIVISION
This job announcement has closed

Summary

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service.

About the Position: This is an Engineering Technician (Civil) developmental position to the Full Performance of GS-11. This position is located in the Engineering and Construction Division, Design Branch, Geospatial Section, Chicago, IL.

Overview

Help
Hiring complete
Open & closing dates
11/09/2023 to 12/04/2023
Salary
$41,996 to - $100,084 per year
Pay scale & grade
GS 5 - 11
Location
1 vacancy in the following location:
Chicago, IL
Remote job
No
Telework eligible
Yes—as determined by the agency policy.
Travel Required
25% or less - You may be expected to travel for this position.
Relocation expenses reimbursed
Yes—You may qualify for reimbursement of relocation expenses in accordance with agency policy.
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
11
Job family (Series)
Supervisory status
No
Security clearance
Not Required
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Announcement number
CERE236874570097HW
Control number
759787800

This job is open to

Help

Clarification from the agency

Open to all US Citizens

Videos

Duties

Help
  • Develop preliminary and final details of drawings, and all or portions of design analysis for a variety of civil work of engineering features for navigation, flood control, ecosystem restoration, and emergency operation projects.
  • Prepare preliminary and final input to planning reports, design documentation reports, contract drawings, as-built drawings and OM manuals.
  • Prepare three-dimensional digital terrain models from survey data downloaded from data collectors or from digital surveys.
  • Prepare survey request for civil works and environmental restoration projects.
  • Contact project managers and others outside Design Branch to obtain needed technical and scheduling information and to plan and coordinate work efforts.
  • Perform technical and design assignments using CADD and civil engineering design software package.
  • Assist in developing and maintaining general engineering CADD standards.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.

Qualifications

Who May Apply: US Citizens

In order to qualify, you must meet the education or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Individual Occupational Requirements for GS-0802 series includes:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/engineering-technical-series-0802

Specialized Experience GS-05 - one year of specialized experience which includes initiating and reviewing others technical and design assignments using Computer Aided Design and Drafting (CADD). This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-04).

Specialized Experience GS-6 - one year of specialized experience which includes developing and completing some technical and design assignments using Computer Aided Design and Drafting (CADD). This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-05).

Specialized Experience GS-7 - one year of specialized experience which includes developing and completing advanced technical and design assignments using Computer Aided Design and Drafting (CADD) ; assisting with create drawings and make modifications to features for various Civil Works projects. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-06).

Specialized Experience GS-8 - one year of specialized experience which includes completing technical and design assignments using Computer Aided Design and Drafting (CADD); understanding how survey and engineering data and drawings are developed and their application as related to construction; making modifications to features for various Civil Works projects; prepares quantity estimates, and shares responsibility for technical accuracy of calculations and project features. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-07).

Specialized Experience GS-9 - one year of specialized experience which includes drawing preparation utilizing Computer Aided Design and Drafting (CADD); utilizing more advanced CADD applications and Digital Terrain Modeling (DTM) features, as well as surveying, civil engineering and drafting standards to complete and/or analyze design analysis, drawings, and quantity estimates; preparing preliminary and final input to planning reports, design documentation reports, contract drawings, as-built drawings and O&M manuals; identifying technical, civil/site design, and survey.

Specialized Experience GS-10 - one year equivalent to the GS-09 level in the Federal service which includes drawing preparation utilizing Computer Aided Design and Drafting (CADD) using Building Information Modeling (BIM), utilizes more advance CADD applications and Digital Terrain Modeling DTM features, as well as surveying, civil engineering and drafting standards to complete and/ or analyze design analysis, drawings, and quantity estimates; preparing preliminary and final input to planning reports, design documentation reports, contract drawings; identifying technical civil/site design, and survey problems inherent in the assignment; Use AEC CADD standards for drawings

Specialized Experience GS-11 - one year of specialized experience which includes providing designs of intricate and complex systems includes grading and alignment of levees, channels, roads, erosion and sediment control features, wetland mitigation, stream bank restoration; preparing three-dimensional digital terrain models from survey data downloaded from data collectors or from digital surveys.; and expert knowledge of Computer Aided Design and Drafting (CADD) systems operation and maintenance requirements. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-10).

Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • One year trial/probationary period may be required.
  • Direct deposit of pay is required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a Career Program (CP) 18 - position
  • You may claim military spouse preference (MSP).
  • If a MSP applicant is determined best qualified and selected, placement must be at the full performance level for priority consideration.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.
  • When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction/ for more information.
  • If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application.
  • Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.
  • Information may be requested regarding the vaccination status of selectees for the purposes of implementing workplace safety protocols. For more information, visit https://www.saferfederalworkforce.gov/faq/vaccinations/.
  • Relocation/Recruitment/Student Loan Repayment incentive(s) MAY BE authorized to highly qualified candidate.
  • Must sign a service agreement if incentive(s) is/are authorized.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.