This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/725500900. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
THIS IS AN ARMY NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION
UNIT: AASF #1
LOCATION: St. Paul, MN
SELECTING OFFICIAL: CW3 Austin Corbine (651) 281-3413
ARMY NATIONAL GUARD MEMBERSHIP IS REQUIRED
05/12/2023 to 06/02/2023
$32.47 - $37.96 per hour
WG 12
1 vacancy in the following location:
No
No
Not required
No
Permanent -
Full-time -
Excepted
12
No
Yes
MN-11966117-23-417
725500900
Current members, those who want to join or transitioning military members.
United States Citizens, National Guard
Major Duties: This is not an all-inclusive list
A ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-12, 1. Performs operational checks, inspections, tests and troubleshooting on electronic integrated systems composed of a number of sensor subsystems: Integrated Vehicle Health Management System (IVHMS), the Common Missile Warning System (CMWS), the Improved Countermeasure Dispenser System (ICMD), the Night Vision Goggle System (NVG), the Air Data Subsystem, the Attitude Heading Reference System (AHRS) and Doppler/GPS Navigation System (DGNS), Command Instrument Set (CIS) ; a logic subsystem-- the Multiplex Data Bus System (MUX), the Multiplex Remote Terminal Units (MRTU), Data Link Terminal Units (DLTU), and Digital Automatic Flight Control System (DAFCS); and actuating subsystems--, and the Digital Automatic Stabilization System (DASS), which includes the Stability Augmentation System (SAS) and Command Augmentation System (CAS) and Hover Augmentation System (HAS).
2. Completes operational checks, inspections, tests and troubleshooting of Line Replaceable Units (LRU). Isolates unusual malfunctions using technical manuals, schematics, and wiring diagrams, tools and test equipment including automatic test equipment. Solves problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjusts and aligns sensors, transmitters, amplifiers, power supplies, display devices, controls, actuators, servos, computers and other related components. Removes faulty LRUs for shop repair. Installs serviceable components into aircraft and performs total systems alignments in accordance with existing technical manuals and directives. Accomplishes technical manual compliance and modification of components and systems and completes systems checkout for proper operation. Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE).
3. Completes bench check, testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units. Uses a variety of test equipment such as automatic test equipment (ATE), oscilloscopes, DTA computer, multi-meters, power-meters, and special purpose bench test sets. Tests and troubleshoots solid state electronic assemblies and subassemblies such as circuit cards, modules, rate gyros, electronic control amplifiers, electro-mechanical assemblies, random access memories, programmable read-only memories and various integrated circuits. Identifies faulty parts and repairs to level authorized. Ensures and certifies operational integrity of various night vision systems, and electro-optical components. Reassembles unit after repair, performs alignment and makes shop checks.
4. Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data, and assists in design changes as necessary. Conducts debriefing of aircrews to determine the nature of system malfunctions, then documents all maintenance performed and records information related to the system, LRU's, or shop repairable units on both aircraft and historical records.
5. When designated on NGB Flying Status Orders, serves as member of flight crew for the purpose of diagnosing and recording malfunctions, or otherwise determining maintenance and repair requirements.
6. Guides lower level mechanics in the performance of duties. Conducts on-the-job training on assigned systems and related support equipment and tasks to include classroom instruction as necessary.
7. Processes and accounts for due-in supply assets. Ensures that material and equipment are properly stored, protected and maintained and that funds are not obligated for material or parts without proper justification.
8. Prepares for and participates in various types of readiness evaluations such as Operational Readiness Evaluations (ORE), Command Logistics Readiness Inspections (CLRT-X), and Aviation Resource Management Surveys. May be required to perform additional duties such as structural firefighting, aircraft handling, heavy equipment operation, and maintenance of facilities and equipment, or serve as a member of a team to cope with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations.
Performs other duties as assigned.
CONDITIONS OF EMPLOYMENT
EDUCATION: N/A
You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
REMARKS: No PCS available. Position will not be filled until current incumbent vacates. Sensitivity Level 2. Participation in direct deposit is mandatory. - Males born after 31 December 1959 must be registered for Selective Service.
Acceptance of a Technician position may result in the termination of your Selected Reserve bonus.
To view ALL MN National Guard Vacancies, go to: https://minnesotanationalguard.ng.mil/full-time-jobs-in-minnesota/
IMPORTANT NOTES:
You will be evaluated for this job based on how well you meet the qualifications above.
AREAS OF PRIORITY: In Accordance with MN National Guard Regulation 690-335 (Army) or 36-1 (Air), Applications will be forwarded to the selection official to conduct reviews by area of priority as listed below
Area 1: Current On-board Minnesota National Guard Title 32 Technicians who are in permanent or indefinite technician status as a result of being competitively hired within that National Guard component applying for a position within the component which they are currently employed.
Area 2: Current Minnesota National Guard Title 32 Technicians who are in permanent or indefinite technician status as a result of being competitively hired at a sister component that is identified on the Position Vacancy Announcement (PVA), including onboard Title 5 employees that are also current members of MNNG; i.e. Army MNNG to Air MNNG, Air MNNG to Army MNNG.
Area 3: All Minnesota National Guard members currently assigned to the MNANG or to the MNARNG applying for a position within the component in which they are currently assigned. i.e. temporary technician or Traditional Guardsman.
Area 4: Currently assigned service members in other branches of the military outside of the Minnesota National Guard, to include those assigned to Active Duty, Reserve or other state's National Guard.
Area 5: All individuals able to and willing to become members of the Minnesota National Guard including prior service not currently assigned to a military component and non-prior service US civilians.
Evaluation Factors: Candidates will be evaluated on the basis of appropriate education, experience, training, self-development activities, and special awards. Candidates are considered on the basis of available information on their current application and supporting information that has been provided to this office. To ensure full consideration, applicants are urged to submit information about their training, self-development, outside experience, activities and awards. National Guard military (Part-time) service is considered as full-time experience when evaluated against the qualification requirements for a technician position. The applicant is credited with actual number of months the member has been in the National Guard if the experience is related.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
To apply for this position, you MUST submit a complete Application Package which includes:
1. Resume and/or OF 612 showing work schedule, hours worked per week, dates (format must include Month and Year, e.g, 02/2017, Feb 2017, ect.) of employment and duties performed
2. Transcript: If position requires a degree or if using education to qualify
3. It is highly recommended that you also submit the AGO 163 to accurately reflect your military experience
Copies of the OF 612 and AGO 163: http://minnesotanationalguard.ng.mil/full-time-jobs-in-minnesota/
Other Required Documents: N/A
Job Information: Vacancy Identification Number ( 11966117 ), title ( ELECTRONIC INTEGRATED SYSTEMS MECHANIC ) and Grade(s) ( 12 ) for which you are applying for.
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/11966117
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
CONTACTING US: After you have read all the instructions in this vacancy announcement, if you still have questions about this position or the application process, you may contact us at (651) 282-4155.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/725500900. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Learn more about
MINNESOTA ARMY NATIONAL GUARD:
This position is located in the Electronics Branch of an Army Aviation Support Facility (AASF), Army Aviation Flight Activity (AAFA), or Theatre Aviation Sustainment Maintenance Group (TASMG). Its purpose is to perform work involved in installing, troubleshooting, repairing, modifying, calibrating, aligning, and maintaining the complete electronic integrated systems on Army National Guard helicopters..
POSITION DESCRIPTION: D0872P01