Skip to main content
U.S. flag

Aerospace Engineer, AST - Structural Dynamics

National Aeronautics and Space Administration
John Glenn Research Center at Lewis Field
This job announcement has closed

Summary

You will provide experience and expertise in vibration and modal testing, data acquisition, data processing, modal parameter extraction, Finite Element Analysis, Model Correlation, Model reductions/Superelements, and Dynamic Analysis. You will support vibration and modal testing at GRC's Structural Dynamics Lab (SDL) as well as at GRC's Armstrong Test Facility (ATF) on the Mechanical Vibration Facility (MVF).

Overview

Help
Hiring complete
Open date: 08/03/2022
Closed date: 08/16/2022
Location
1 vacancy in the following location:
Work site options
Telework eligible
Yes—as determined by the agency policy.
Remote job
No
Relocation expenses reimbursed
No
Salary
$69,092 - $128,015 per year
Pay scale & grade
GS 11 - 13
Promotion potential
13
Pay scale and grade determines the salary of the job.
Work schedule
Full-time
Travel Required
Occasional travel - You may be expected to travel for this position.
Appointment type
Term - Not to exceed 2 years with the option to extend to a maximum of 6 years or be made permanent without further competition.
Occupations and job series
Supervisory status
No
Federal service type
This job is in the Competitive Service
Drug test
No
Security clearance
Not Required
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Jobs require a background check and some require a security clearance. The type depends on the job.
Background check type
Announcement number
GRC-22-DE-11592018-CWO
Control number
668503100

This job is open to

Help

Exclusive Post

Videos

Duties

Help
  • Duties described below are at the full-performance level. Duties assigned at a lower grade level will be of more limited scope, performed with less independence and limited complexity; duties will be commensurate with the grade of selected employee.
  • Provide expertise in vibration and modal test and analysis to GRC flight and development projects.
  • Support spaceflight projects to ensure NASA standards and project requirements are met in the areas of Structures, Loads and Dynamics.
  • Provide leadership for branch fundamental testing techniques and encourage/implement advanced testing techniques.
  • Provide expertise in and perform modal pre-test analysis techniques, finite element model creation, finite element model reductions, finite element model correlation to test data and implement advanced dynamic finite element analysis techniques.
  • Support and/or lead vibration acceptance and qualification testing, setup and perform modal testing of development and/or flight hardware and perform vibration and modal test data processing.

Requirements

Help

Conditions of employment

  • This position is open to U.S. citizens, nationals or those who owe allegiance to the U.S
  • Position subject to pre-employment background investigation
  • You must meet qualifications requirements by the closing date of this announcement
  • If selected, you will be required to complete a financial disclosure statement.
  • This position may require a one year trial period.
  • Please see the "Additional Information" section for important information about COVID-19 vaccination requirements for federal employees.

Qualifications

In addition to the Basic Education Requirement (in the Education section below), to qualify for this position you must meet the requirements below and have one year of specialized experience equivalent to the next lower grade, which has equipped you with the particular competencies needed to successfully perform the duties of the position described above.

To qualify for GS-11, you must have:
a) You must have one year of directly related specialized experience equivalent to the GS-09 level:

  • Assisting with modal and vibration analysis and testing, and implementing fundamental testing techniques;
  • Assisting with pre-test analysis techniques for instrumentation selection, finite element model creation, finite element model reduction for advanced dynamic analysis, or finite element model correlation to test data; and
  • Supporting development and flight or operational projects, interpreting project requirements to find verification and validation approaches for the requirements.
OR
b) Completed all requirements for a doctoral degree (i.e., Ph.D. or equivalent) in an appropriate field
OR
c) Completed 3 full academic years of graduate education in an appropriate field
OR
d) Have an equivalent combination of experience and graduate study as discussed in a), b) and c) above

To qualify for GS-12, you must have one year of directly related specialized experience equivalent to the GS-11 level:
  • Participating in modal and vibration analysis and testing and implementing fundamental and advanced testing techniques;
  • Participating in pre-test analysis techniques for instrumentation selection, finite element model creation, finite element model reduction for advanced dynamic analysis, or finite element model correlation to test data; and
  • Participating in development and flight or operational project life cycles, interpreting project requirements to find verification and validation approaches for the requirements.
To qualify for GS-13, you must have one year of directly related specialized experience equivalent to the GS-12 level:
  • Executing/leading modal and vibration analysis and testing and implementing fundamental and advanced testing techniques;
  • Performing pre-test analysis techniques for instrumentation selection, finite element model creation, finite element model reduction for advanced dynamic analysis and finite element model correlation to test data; and
  • Leading development and flight or operational projects in structural dynamics requirements interpretation to find verification and validation approaches for the requirements.
Your resume must include a clear and detailed narrative description, in your own words, of how you meet the required specialized experience. Experience statements copied from a position description, vacancy announcement or other reference material constitutes plagiarism and may result in disqualification and losing consideration for the job.

Required college majors for applicants qualifying on the basis of graduate education only GS-11 only:
Aeronautical Engineering, Aeronautics, Aerospace Engineering, Astronautical Engineering, Astronautics, Chemical Engineering, Chemistry, Materials Engineering, Materials Science, Applied Mechanics, Engineering Mechanics, Mechanical Engineering, Nuclear Engineering Physics, Physics, Applied Physics, Engineering Physics, Structural Engineering, Welding Engineering.
Other majors will qualify if the major includes or is supplemented as follows: Ceramics or Ceramics Engineering (with 12 semester hours in refractory ceramics, cermets or protective coatings); Civil Engineering, Computer Science, or Geology (with 12 semester hours in strength of materials, structures, thermodynamics, and/or basic static and dynamics); Metallurgy or Metallurgical Engineering (with 12 semester hours in physical or adaptive metallurgy, high temperature metals and alloys, cermets); Mathematics or Nuclear Engineering (with nine semester hours in physics, structures, materials or other appropriate courses). Other appropriate physical science or engineering fields may qualify with appropriate supplemental courses.

Education

Basic Education Requirement: You must have successfully completed a bachelor's degree with a major in one of the following:
a) Engineering from a college or university that has ABET accredited engineering programs
b) Physical Science, Mathematics, Life Science or other field of Science
c) Computer Science that included 30 semester hours or 45 quarter hours of course work in any combination of mathematics, statistics and computer science with at least half of those hours in mathematics and statistics courses that included differential and integral calculus.

If you did not complete a qualifying bachelor's degree, you may be eligible if you have obtained a graduate degree in an AST qualifying field, as listed above.

Degrees in engineering technology are not considered qualifying for this position.

Engineering degrees earned within the United States: Engineering degrees earned within the United States must be from a college or university that has at least one ABET accredited engineering program. To find out if a school has at least one ABET accredited program, please visit http://www.abet.org.

Engineering degrees earned outside the United States: Engineering degrees earned outside the United States must be recognized by a Mutual Recognition Agreement (MRA), often known as accords. These are non-governmental agreements among organizations that accredit academic degree programs. MRAs recognize the substantial equivalence of mature accreditation systems and programs accredited by signatory organizations within their jurisdictions. For a listing of Signatories, please visit, https://www.abet.org/global-presence/mutual-recognition-agreements/is-your-program-recognized/.

Science and other related degrees earned within the United States: Science and other related degrees must have been awarded from colleges or universities that are accredited by recognized accrediting organizations. For a list of schools that meet this criteria, go to http://ope.ed.gov/accreditation/.

Science and other related degrees earned outside the United States: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show that the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs. These education credentials must be deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://www2.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html.

All degrees must have been received in the year of, or any year subsequent to the original date of accreditation.

Additional information

If you are selected, NASA may request information regarding your vaccination status for the purposes of implementing workplace safety protocols, such as masking, physical distancing, testing, travel, and quarantine.

Additional selections may be made for similar positions across NASA within the local commuting area(s) of the location(s) identified in this announcement. By applying, you agree to have your application shared with interested selecting official(s) within NASA. CTAP/ICTAP will be cleared for any additional selection from this announcement.

This appointment may be extended beyond the initial appointment date, for a period not to exceed a total of six years.

Under the NASA Flexibility Act of 2004, individuals appointed under this announcement may be converted to permanent appointment, either non-competitively or through internal agency competitive placement procedures. Conversion is not guaranteed, and is contingent on the employee meeting all legal requirements. For more information, see: nasapeople.nasa.gov/hclwp/term-appointments.htm

Current Federal civilian employees may apply for this position. If selected, a break in service of at least 4 calendar days may be required prior to appointment to this position.

If you have special priority selection rights under the Agency Career Transition Assistance Program (CTAP) or the Interagency Career Transition Assistance Program (ICTAP), you must:
- Indicate your eligibility when applying for a position. The questionnaire asks you to identify your ICTAP/CTAP eligibility.
-Be well qualified for this position to receive consideration. Candidates rated in the 'Best Qualified' category are considered well-qualified. Please see 'How You Will Be Evaluated' for more information.
-Submit proof that you meet the requirements for CTAP/ICTAP as indicated in 'Required Documents'

For additional information about CTAP/ICTAP eligibility, click here - https://www.opm.gov/policy-data-oversight/workforce-restructuring/employee-guide-to-career-transition/#ictap.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

You will be evaluated for this position based on how well you meet the qualifications and eligibility requirements listed in this vacancy announcement. To determine your qualifications and referral status, we may review your resume and supporting documentation and compare it against your responses to the vacancy questionnaire. Overstating your qualifications and/or experience in your application materials or application questionnaire may result in your removal from consideration.

You will be assessed on the following competencies:

  • Influencing/Negotiating
  • Problem Solving
  • Aerospace Engineering
  • Research
  • Design and Development Engineering
  • Mechanics and Durability
  • Program/Project Analysis
  • Structural Test Engineering
NASA considers paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Under NASA's category rating process, applicants will be assessed on the position competencies and placed in one of three categories identified and defined below: :
  • Best Qualified Category - Applicants who demonstrate a superior level of all evaluation criteria.
  • Highly Qualified Category - Applicants who demonstrate a satisfactory level of the evaluation criteria.
  • Qualified Category - Applicants who demonstrate the basic qualifications, with general knowledge, skills, and abilities.
Names of all qualified candidates in the Best Qualified category will be sent to the hiring official for employment consideration (unless a sufficient number of qualified veterans are found - in which case only those names will be initially certified ). Candidates within the Best Qualified category who are eligible for veteran preference will receive selection priority over non-veteran preference eligibles.

John Glenn Research Center at Lewis Field

Explore the Extraordinary
Calling all the innovators, pioneers, visionaries, and adventurers! We are a diverse group of professionals united by a common purpose: to discover and expand knowledge for the benefit of humanity. We're building on our rich legacy by embarking on new and exciting missions, both on Earth and beyond and we're looking for fresh ideas to help us get there. Do you have a passion for exploration? Do you want your work to leave an enduring impact? Join us in a career that can take you farther than you can imagine. At NASA, our work is more than just a profession-it's a lifelong pursuit, a passion, and a chance to change the world. NASA is more than astronauts. We are scientists, engineers, IT specialists, human resources specialists, accountants, writers, technicians and many other kinds of people working together to break barriers to achieve the seemingly impossible.

Explore the extraordinary, every day; explore a career at NASA!

Agency contact information

NASA Shared Services Contact Center
Phone
1-877-677-2123
Fax
1-866-779-6772
Email
nssc-contactcenter@mail.nasa.gov
Address
Glenn Research Center
21000 Brookpark Rd
Cleveland, OH 44135
US

Visit our careers page

Learn more about what it's like to work at John Glenn Research Center at Lewis Field, what the agency does, and about the types of careers this agency offers.

https://www.nasa.gov/careers

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.