Skip to main content
U.S. flag
Back to results

General Engineer

Department of the Army
Army Installation Management Command
Directorate of Public Works, Master Planning Division
This job announcement has closed

Summary

About the Position: Fort Hood rests in the beautiful 'hill and lake' country of Central Texas between Killeen and Copperas Cove and is approximately 60 miles north of the capital city of Austin, 50 miles south of Waco, 160 miles south of Dallas, and 150 miles north of San Antonio. For everyone who enjoys the outdoors, The Great Place is the ideal location, because of warm winters and hot summers. The nearby lakes, Belton and Stillhouse, offer year round outdoor recreation activities.

Overview

Help
Hiring complete
Open & closing dates
03/30/2022 to 12/16/2022
Salary
$79,363 to - $103,176 per year
Pay scale & grade
GS 12
Location
Fort Hood, TX
1 vacancy
Remote job
No
Telework eligible
No
Travel Required
Occasional travel - You may be expected to travel occasionally for this position.
Relocation expenses reimbursed
Yes—You may qualify for reimbursement of relocation expenses in accordance with agency policy.
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
None
Job family (Series)
Supervisory status
No
Security clearance
Secret
Drug test
No
Position sensitivity and risk
Noncritical-Sensitive (NCS)/Moderate Risk
Trust determination process
Announcement number
WTEF222022033437HWS
Control number
645622100

Duties

Help
  • Serve on the staff of the Master Planning Division with responsibility for managing Fort Hood's Master Plan.
  • Serve as the Directorate of Public Works principal authority on all matters pertaining to the Installation Design Guide (IDG).
  • Review project specs, drawings, or reports to ensure construction program progresses in accordance with approved project priorities, policies, laws, regulations, Installation Design Guide (IDG), and the Installation Master Plan.
  • Prepare and conduct Installation Real Property Planning Board meetings which advise the Garrison Commander on a wide range of comprehensive planning issues such as priorities, future plans and amendments, long range policies, strategies, etc.
  • Use automated management information systems such as Real Property Planning and Analysis System (RPLANS) to prioritize new construction, make realignment/stationing decisions, or prepare budget submissions.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • Position requires the incumbent be able to obtain and maintain a determination of eligibility for a Secret security clearance or access for the duration of employment. A background investigation and credit check are required.

Qualifications

STANDING REGISTER: This is a Standing Register (Open Continuous) announcement for GS-0801-12, General Engineer, positions. The initial cut-off date for referral is 22 April 2022; after this date, additional cut-off dates will be established as vacancies occur, until the closing date of the announcement.

NOTE: If you are referred and not selected, or receive a letter indicating you were ineligible because of missing documents, you must complete a new application package for this vacancy to receive further consideration. If you decline a position covered in this announcement, and want to be considered at a later time, you must reapply.

Who May Apply: US Citizens

In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Requirement for General Engineer:

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

NOTE: In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

Specialized Experience: One year of specialized experience which includes planning and/or managing facility construction projects (i.e. buildings or infrastructures, bridges, ranges, central energy plant, etc.). This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • Two year trial/probationary period may be required.
  • Direct Deposit of Pay is required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a Career Program (CP) 18 - Engineers and Scientists position.
  • Multiple positions may be filled from this announcement.
  • Further certification from this vacancy may take place for up to 90 days after close date of the announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application.
  • Payment of Permanent Change of Station (PCS) costs is authorized, subject to the provisions of the Joint Travel Regulations.
  • When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction/ for more information.
  • Information may be requested regarding the vaccination status of selectees for the purposes of implementing workplace safety protocols. For more information, visit https://www.saferfederalworkforce.gov/faq/vaccinations/.
  • Recruitment or Relocation Incentives may be authorized for this position.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. If you are minimally qualified, your résumé and supporting documentation will be compared against your responses to the assessment questionnaire to determine your level of experience. If, after reviewing your résumé and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.