As a Civil Engineer, you will perform the following duties:
• Design and review engineering projects for fish facility installations and upgrades in estuary, large rivers and dams, small stream environments, irrigation screens, and fish passage at road crossings.
• Provide hydrologic and hydraulic engineering calculations to evaluate water diversion and discharge rates, water storage and management operations, and infrastructure designs associated with water resource projects implementing or affecting upstream and downstream passage.
• Monitor projects to ensure they are built according to the plans and specifications, ecological and engineering objectives are met, and that all projects comply with the Federal Energy Regulatory Commission (FERC) and the Endangered Species Act (ESA).
• Assist fisheries biologists in the development, application, and monitoring of biological opinions and remain well informed of current engineering principles and standards related to hydraulics and fish passage.
• Engage in activities associated with measurement of stream flows or collecting on-site information needed to develop functional designs for fish passage facilities, or to evaluate performance of existing facilities.

Conditions of employment

• Must be a U.S. Citizen or National to apply.
• Required to pass a background investigation and fingerprint check.
• Must be suitable for Federal employment.
• Must be registered for Selective Service, if applicable (www.sss.gov)
• Qualifications requirements must be met by closing date of announcement.

This position will be filled under the DOC Alternative Personnel System (CAPS). This system replaced the Federal GS pay plan and structure. Under CAPS, positions are classified by career, pay plan, and pay band.

The ZP-3 is equivalent to the GS-11/12.  

NOTE: 
* A one year probationary period may be required.

* Payment of relocation expenses is not authorized.

* This position is not in the bargaining unit.

* This position requires a Low Risk Security Clearance. 

CONDITION OF EMPLOYMENT: Incumbent must possess a valid driver’s license, because this position requires the operation of a Federal motor vehicle.

College Transcript:  If you are qualifying based on education, submit a copy of your college transcript that lists college courses detailing each course by the number and department (i.e., bio 101, math 210, etc.), course title, number of credit hours and grade earned. You must submit evidence that any education completed in a foreign institution is equivalent to U.S. education standards with your resume.   You may submit an unofficial copy of the transcript at the initial phase of the application process. If course content cannot be easily identified from the title of the course as listed on your transcript, you must submit an official course description from the college/university that reflects the content at the time the course was taken.

Note: Your college transcript is used to verify successful completion of degree, or college course work.  An official college transcript will be required before you can report to duty.

This Job Opportunity Announcement may be used to fill other Civil Engineer, ZP-0810-3 positions throughout NOAA. The position must be alike (e.g. within the same geographic locations, same grade/band and requires the same qualifications and specialized experience as indicated in this vacancy announcement).

Applicants must meet ALL application requirements, to include a complete online resume, by 11:59 p.m. EASTERN TIME (ET) on the closing date of this announcement.

Qualifications

Qualification requirements in the vacancy announcements are based on the U.S. Office of Personnel Management (OPM) Qualification Standards Handbook, which contains federal qualification standards.  This handbook is available on the Office of Personnel Management's website located at: https://www.opm.gov/policy.

BASIC REQUIREMENTS: This position has a positive Education Requirement in addition to at least one year of Specialized Experience OR substitution of education for experience OR combination (if applicable) in order to be found minimally qualified. Transcripts must be submitted with your application package. You MUST meet the following requirements:

To qualify for the 0810 series: 

EDUCATION: 

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of education and experience: college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.

3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.

4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor’s degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)

Note: An applicant who meets the basic requirements as specified in A or B above, except as noted under B.1., may qualify for positions in any branch of engineering unless selective factors indicate otherwise.

-AND-

SPECIALIZED EXPERIENCE: Applicants must possess one year of specialized experience equivalent in difficulty and responsibility to the next lower grade level in the Federal Service.  Specialized experience is experience that has equipped the applicant with the particular competencies/knowledge, skills and abilities to successfully perform the duties of the position.  This experience need not have been in the federal government.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

To qualify at the ZP-3 or GS-11 level: 

SPECIALIZED EXPERIENCE: In addition to meeting the Basic Requirements above, one full year (52 weeks) of specialized experience equivalent to the ZP-2 or GS-09 in the Federal service. Specialized experience MUST include all of the following:

• Providing hydrologic and hydraulic engineering calculations required to evaluate infrastructure designs associated with water resource projects that implement upstream and downstream fish passage; and
• Assisting in engineering projects for fish passage installations and fish habitat improvement projects in various fluvial environments; and
• Monitoring the life cycle and habitat requirements of anadromous fish species.

 -OR-

SUBSTITUTION OF EDUCATION: 3 years of progressively higher level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree.

 -OR-

COMBINATION OF EDUCATION AND EXPERIENCE: A combination of education and experience listed above. 

NOTE: Only graduate education in excess of two years is qualifying for combination.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

We will review your resume, optional cover letter and supporting documentation to determine if you meet the minimum qualifications for the position.

Veteran’s Preference does not apply to direct hire recruitment procedures.

Any selections made under this notice will be processed as new appointments to the civil service. Therefore, Current Federal employees would be given new appointments to the civil service and may have to serve a new probationary period under CFR 315.802 (b).

NOTE: A one year probationary period will be required under the Direct Hire Authority unless you are a current Department of Commerce employee and are in the same line of work and with no more than a 30 day break in service.