Clarification from the agency

Open to all qualified applicants in all Areas of Consideration listed below.

As a AIRCRAFT ORDNANCE SYSTEMS MECHANIC (TITLE 32), WG-6652-10/11, this position is located in an Air National Guard Aviation Wing, Aircraft Maintenance Group, Aircraft Maintenance Squadron, Weapons Element (Flight Line). This PD is applicable for the F-15, F-16, F-22, F-35 and A-10 aircraft only. The primary purpose of the position is to troubleshoot, repair, install, modify, test and adjust aircraft ordnance systems, equipment and components. On and/or off-equipment inspection, modification, overhaul, troubleshooting and repair capability of weapons release and gun systems; verifies and analyzes malfunctions, troubleshoots, tests, inspects and loads/unloads conventional munitions; installs/removes weapons delivery equipment, launchers and gun systems.

(1) Operates, analyzes performance, troubleshoots, inspects, installs, maintains, overhauls, repairs and modifies operational ordnance system(s) and subsystems consisting of numerous complex electronic components in fighter aircraft. Examples of individual subsystems or components are: computerized stores management systems or programmable armament control systems, fire/control avionics, fire control sensing, targeting systems, digital multiplex data bus systems, electronic countermeasures equipment, weapons/avionics video display systems and discrete weapons/avionics systems and ensures compatibility of systems and their interfaces through operational test, system alignment and harmonization.

(2) Analyzes performance and isolate malfunctions to individual subsystems and or components of bombing/navigation, fire-control/weapons delivery, weapons multi-sensor displays and external electro-mechanical weapons systems, electro-optical targeting pod/weapon interfaces, R/F electronic countermeasures systems, target radar tracking and missile tracking radar.

(3) Removes, repairs, installs, inspects and conducts operational performance checkout of aircraft ordnance and isolates malfunctions and identifies if failures are in specific LRU's, aircraft weapons, avionics multiplex data bus matrix assemblies, or aircraft digital data wiring.

(4) Loads/unloads, positions and safeties air munitions using applicable technical data and handling equipment. Tests suspension, launch and release systems to ensure proper manual/electrical release on equipment.

(5) Conducts off-equipment troubleshooting and functional checks of electronic weapons control systems to ensure proper manual/electrical release and fire sequence. Performs bench checks to determine extent of repair needed and accomplishes Time Compliance Technical Orders (TCTO) and modifications of components and software and tests for proper operation.

(6) Ensures all munitions are inventoried at the start and completion of the work shift. Ensures that all munitions expenditures are accurately tracked and recorded on applicable forms. When required will assist the munitions custodian of aircrew training munitions in conducting a weekly munitions inventory and reconciliation.

(7) Coordinates with loading standardization and the weapons element supervisor for all load crew-training requirements and ensures only loading certified/qualified personnel are directed to perform weapons loading tasks and may be required to perform weapons expediting on the flight line.

(8) Maintains and reviews publication files of applicable technical orders, regulations, manuals and local directives. Recommends and rewrites methods to improve maintenance procedures, technical data and equipment and initiates unsatisfactory equipment and technical order deficiency reports.

(9) Provides hands-on training instruction to lower graded personnel concerned with the repair of the electronic ordnance systems within the aircraft. May be required to perform additional duties as a production controller, quality assurance inspector, and bench stock monitor for the work center.

(10) Processes and accounts for due in from maintenance (DIFM) supply assets and ensure materials and equipment are properly stored, protected and maintained and funds are not obligated for material or parts without proper justification.

(11) Adjusts, installs and removes cartridges and squibs for tanks and pylons and chaff/flare systems. Adjusts and installs fusing devices in explosive air munitions. Removes and installs safing devices on munitions and gun systems and operates Munitions Maintenance Handling Equipment (MMHE) and loading equipment.

(12) Operates fault detection and digital test equipment. Evaluates pilot trouble reports to determine validity and the necessary repair actions. May be required to maintain certification as a weapons load crew chief or load crewmember.

(13) Performs other duties as assigned.

*The above description only mentions a limited amount of the position's official duties. For a full comprehensive document that covers all the duties of the position, please contact one of the Recruitment Specialists at the bottom of the announcement.

Conditions of employment

• National Guard Membership is required.
• Males born after 31 December 1959 must be registered for Selective Service.
• Participation in direct deposit is mandatory.
• U.S. citizenship is required.
• This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
• The duties of this job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
• Must be able to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
• May occasionally be required to work other than normal duty hours; shift work and/or overtime may be required.
• Federal employment suitability as determined by a background investigation.
• May convert to Permanent without further competition and may be required to successfully complete a probationary period.
• Must have a valid driver's license.
• Must be able to obtain/maintain the necessary security clearance for the position, if applicable.
• Compatible Military AFSC Assignments: 2W1X1
• Military Grades: Enlisted members only

Qualifications

Areas of Consideration:
Area 1 - Current permanent or conditional Title 32 Technicians of the Oregon ANG.
Area 2 - Current permanent or conditional Title 5 Employees of the Oregon ANG.
Area 3 - Current service members in the Oregon ANG.
Area 4 - Individuals in the Active Duty US Air Force, Air Force Reserve, or Air National Guard.
Area 5 - US Citizens eligible to meet the military requirements for membership in the Oregon ANG.

GENERAL and SPECIALIZED EXPERIENCE QUALIFICATION REQUIREMENTS:
Work involved in troubleshooting, installing, modifying, repairing and adjusting a variety of ordnance systems such as missile and special weapons launching equipment. Experience or training which demonstrates the applicant's ability to repair malfunctions of ordnance equipment and components. Ability to use sketches, electrical diagrams, technical specifications and engineering drawings. Experience which demonstrates skill in the use of test equipment to make electrical, hydraulic, and pneumatic checks.
WG-10 & WG-11 must have 18 Months experience or training in planning and layout of repair sequence and ability to complete modification, repair and installation of ordnance systems. Experience in diagnosing and troubleshooting malfunctions and determining remedy where complex relationships exist. Experience in hand tools and a limited number of measuring equipment. Experience in the use of a variety of test equipment. Experience in interpreting technical directions, blueprints, sketches, wiring diagrams and manufacturer's specifications.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. Your rating will be based on both your entire application package as well as the responses to the assessment questionnaire. Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your category rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position. Please follow all instructions carefully. Errors or omissions may affect your eligibility. If you are found to be among the qualified candidates, you will be referred to the selecting official for employment consideration.

Qualified candidates will be assigned to a quality category. The quality categories are:

1. Highly Qualified: Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements for this position.

2. Qualified: Candidates in this category meet the minimum education and/or experience requirements for this position.