An official website of the United States government
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.
This is an indefinite position, that may become permanent.
This National Guard position is for a Aircraft Ordnance Systems Mechanic, Position Description Number D1736P01and is part of the Maryland Air National Guard.
10/09/2019 to 10/23/2019
$34.32 - $42.43 per hour
WG 10 - 11
2 vacancies in the following location:
No
Not required
No
Temporary - Indefinite
Full-Time
Excepted
11
No
Yes
MD-10503970-AF-19-150A
534427500
Current members, those who want to join or transitioning military members.
National Guard
As a Aircraft Ordnance Systems Mechanic, WG-6652-10/11, you will operate, analyze performance, troubleshoot, inspect, install, maintain, overhaul, repair and modify operational ordnance system(s) and subsystems consisting of numerous complex electronic components in fighter aircraft. Examples of individual subsystems or components are: computerized stores management systems or programmable armament control systems, fire/control avionics, fire control sensing, targeting systems, digital multiplex data bus systems, electronic countermeasures equipment, weapons/avionics video display systems and discrete weapons/avionics systems and ensures compatibility of systems and their interfaces through operational test, system alignment and harmonization. Analyzes performance and isolate malfunctions to individual subsystems and or components of bombing/navigation, fire-control/weapons delivery, weapons multi-sensor displays and external electro-mechanical weapons systems, electro-optical targeting pod/weapon interfaces, R/F electronic countermeasures systems, target radar tracking and missile tracking radar. Reviews and analyzes aircrew debriefs and data transfer equipment information to aid in resolving in-flight discrepancies encountered and isolates unusual system anomalies within the complete system using technical manuals, schematics, logic and wiring diagrams, tools and test equipment including automatic test equipment. Solves aircraft ordnance malfunctions by analyzing the installation, circuitry and operating characteristics of the electronic ordnance system. Adjusts and aligns sensors, transmitters, power supplies, display devices, controls, actuators, servos, computers and other interrelated components. Performs bore sighting of the complete system to ensure alignment of all components of the electronic weapons delivery system such as radar, aerial gun system, pilot's HUD, Angle Of Attack (AOA) and aircraft Inertial Navigation System (INS). Removes faulty LRU's for shop repair and identifies faulty subassemblies such as bad circuit cards, random access memory, operational flight program (OFP) and various electronic circuits and installs serviceable components into aircraft. Inspects completed maintenance to ensure compliance of technical directives and initiates the necessary forms to ensure documentation is correct and entered in the aircraft historical records. Performs other duties as assigned.
MILITARY REQUIREMENTS:
Compatible military grade and assignment required prior to the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
Military Grades: MSgt / E-7 and below
Compatible Military Assignments: 2W1X1
Open to members of National Guard members nationwide and individuals eligible to join.
Participation in direct deposit is mandatory.
You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):
- Knowledge and appropriate training in functions of inspection, maintenance, installation, modification and repair of air munitions launch, release, suspension systems, R/F electronic countermeasures system and aircraft gun systems.
- Comprehensive knowledge and skill in troubleshooting procedures, diagnosing problems and determining corrective action in the aircraft ordnance electronic systems.
- Knowledge and skill to troubleshoot, repair, modify, or remove equipment and components such as gun systems, bomb racks, pylons, and the Ammunition Loading Systems (UALS/ALS).
- Knowledge and ability to interpret and trace schematic, logic and wiring diagrams and use a wide variety of test, measurement and diagnostic equipment (TMDE). Ability to perform algebraic and trigonometric formulas to solve work related problems.
- Operational knowledge and skill in the operation, interrelationship and interdependent aspects of each ordnance system within the total complex aircraft electronic system(s) within fighter aircraft. Has extensive knowledge of each system's prerequisites, sequential events, and logic flow and signal input/output requirements for successful target acquisition, lock-on, launch and delivery of air-to-air and air-to-ground weapons.
- Knowledge of the principals of digital and analog circuits, synchro-electro-mechanical devices, solid-state devices theory, digital techniques /servo operation and circuit theory.
- Comprehensive knowledge and skill to exercise judgment and to apply electronic theories and practices to identify, isolate, and repair malfunctions in individual subsystems of complex electronic systems.
- Knowledge of mechanical, hydraulic, pneumatic and optical principals.
- Skill in operating assigned computer systems to document job data and to operate and run test equipment.
- Skilled in high reliability soldering techniques and electrostatic discharge protective techniques is required.
- Knowledge of the Technical Order Distribution System and other technical publications and directives relating to work requirements.
To apply for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.
2. Other supporting documents
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/10503970~
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/534427500. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Learn more about
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.
This is an indefinite position, that may become permanent.
The National Guard is the oldest component of the Armed Forces of the United States. Since the earliest American colonial days, citizens have joined together for collective defense. We have a proud tradition of coming to the aid of our friends and neighbors in times of serious emergencies. Join our National Guard team and serve your nation, your states and your community!
NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted service position that requires membership in a compatible military assignment in the National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
