Skip to main content
U.S. flag
Back to results

Mechanical Engineer

Department of the Army
U.S. Army Aviation and Missile Command
Corpus Christi Army Depot
This job announcement has closed

Summary

About the Position: The mission of the Corpus Christi Army Depot is to overhaul, repair, modify, retrofit, test and modernize helicopters, engines and components for all services and foreign military customers. Corpus Christi Army Depot (CCAD) is the Army's Center of Industrial and Technical Excellence for Rotary Wing Aviation Maintenance. We provide worldwide on-site maintenance services, aircraft crash analysis, lubricating oil analysis, and chemical, metallurgical and training support.

Overview

Help
Hiring complete
Open & closing dates
05/06/2019 to 05/16/2019
Salary
$38,152 to - $97,263 per year
Pay scale & grade
GS 5 - 12
Location
1 vacancy in the following location:
Corpus Christi, TX
Telework eligible
No
Travel Required
Occasional travel - Five percent travel to attend training on an annual basis.
Relocation expenses reimbursed
Yes—You may qualify for reimbursement of relocation expenses in accordance with agency policy.
Appointment type
Permanent
Work schedule
Full-Time
Service
Competitive
Promotion potential
12
Job family (Series)
Supervisory status
No
Security clearance
Not Required
Drug test
No
Announcement number
WTAA195358164326HD
Control number
532733200

This job is open to

Help

Clarification from the agency

US Citizens

Duties

Help
  • Develop designs of industrial test equipment (conventional and unconventional).
  • Check installation and operation of equipment to evaluate performance and possible modification to increase versatility and performance.
  • Analyze engineering needs and make calculations.
  • Participate and/or conduct engineering negotiations on controversial project issues.
  • Visit manufacturing and production areas to study, survey progress, investigate and resolve problems.

Requirements

Help

Conditions of employment

  • This position is designated as moderate risk involving Public Trust. Appointment to this position is subject to a background investigation including a credit check to determine suitability for Federal employment and/or the position.
  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • Two year trial/probationary period may be required.
  • This position requires the completion of a pre-employment Physical Examination and an annual examination thereafter to ensure the continued, required level of physical health And ability or fitness to perform the duties of the position.
  • If you misrepresent your experience/education, or provide False/fraudulent information in/with your application, it may be grounds for not hiring you or for firing you. Making false/ fraudulent statements also may be punishable by fine/imprisonment.
  • This position requires the employee to wear protective clothing/equipment.

Qualifications

Who May Apply: US Citizens

In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social).

You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application.

Additional information about transcripts is in this document.

In addition to meeting the basic requirement, to qualify for this position you must also meet the qualification requirements listed below:

GS-05:

Applicants who meet the basic requirements described in the individual occupational requirements are fully qualified for the specified entry grade. See the below link for basic requirement.

https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf

GS-07:

Specialized Experience: One year of specialized experience which includes 1) Assisting in the design and construction of mechanical engineering devices, equipment or systems using established criteria or specifications; 2) Monitoring the testing of mechanical engineering devices, systems, equipment, components and reviewing the test results to ensure proper functionality; AND 3) Assisting in the inspection and evaluation of mechanical engineering devices, equipment or systems using established criteria. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05).

OR

Education: One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: mechanical, general, or industrial engineering.

OR

Superior Academic Achievement. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. Superior Academic Achievement is based on:
(1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR
(2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR
(3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/).

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages.

GS-09:

Specialized Experience: One year of specialized experience which includes 1) Experience utilizing mechanical engineering concepts and principles to perform routine testing assignments or portions of large complex assignments; 2) Experience with related engineering disciplines (General and Industrial) in order to grasp the relationships that exist between the disciplines; AND 3) Experience with system requirements, designing valid test plans, and analyzing data and technical reports. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07).

OR

Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: mechanical, general, or industrial engineering.

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages.

GS-11:

Specialized Experience: One year of specialized experience which includes 1) Designing tools, shop aides and fixtures through the application of mechanical engineering principles/theories; AND 2) Experience using blueprints, computer aid design software such as AUTOCAD, American Society of Mechanical Engineers (ASME) and OSHA standards. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).

OR

Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: mechanical, general, or industrial engineering.

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

GS-12:

Specialized Experience: One year of specialized experience which includes 1) Experience developing design criteria for a variety of projects; 2) Preparing preliminary design studies involving calculations of pressures, flows, temperatures, vibration, weights, friction and allowable tolerances within designed systems; 3) Experience with cost estimation, budgetary planning, and engineering negotiations; 4) Developing engineering designs and plans for mechanical systems; 5) Experience troubleshooting and maintaining various types of aircraft test equipment; 6) Developing written calibration procedures; AND 7) developing data acquisition tools such as Daytronics system 10 and National Instruments (NI). This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Education

Basic Requirement for Mechanical Engineer:

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Additional information

  • You will be required to provide proof of U.S. Citizenship.
  • Direct Deposit of Pay is Required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a Career Program (CP) 16 - Engineers and Scientists (Non-Construction) position.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.gsa.gov/cdnstatic/FTR%20Bulletin%2018_05%20Relocation%20Allowances_0.pdf for more information.
  • If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application.
  • Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.
  • A Recruitment/Relocation incentive may be authorized.
  • Further certification from this announcement may take place up to 90 days beyond the closing date of this announcement.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. If, after reviewing your résumé and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.