Skip to main content
U.S. flag
Back to results

Precision Measurement Equipment Calibrator

Department of the Army
U.S. Army Aviation and Missile Command
Office of the Director, White Sands Missile Range
This job announcement has closed

Summary

About the Position: You will serve as a calibration specialist in the parameters of electrical, electronic, microwave, nucleonic, optical/laser, physical and dimensional standards and measurements applicable to the calibration, certification and evaluation of test, measurement and diagnostic equipment (TMDE).

Overview

Help
Hiring complete
Open & closing dates
11/01/2018 to 11/16/2018
Salary
$25.01 to - $29.18 per hour
Pay scale & grade
WG 11
Location
1 vacancy in the following location:
White Sands Missile Range, NM
Telework eligible
No
Travel Required
Occasional travel - Ten Percent Travel for Training.
Relocation expenses reimbursed
Yes—Relocation expenses may be authorized in accordance with applicable travel regulations and available command funding. The decision to authorize relocation expenses will be made upon selection and offer.
Appointment type
Permanent
Work schedule
Full-Time
Service
Competitive
Promotion potential
11
Supervisory status
No
Security clearance
Other
Drug test
No
Announcement number
WTBW180894818269D
Control number
515418400

Duties

Help
  • Provide calibration traceability through the Army Calibration Laboratory and Army Primary Standards Laboratory to the National Institute of Standards and Technology.
  • Perform repairs incidental to calibration as required by equipment specifications.
  • Select, apply, and interpret electronic principles and practices as related to the specialty area as required to collect, reduce, display, analyze data, and provide metrology information for a wide variety of general purpose TMDE.
  • Prepare reports to correct errors in existing procedures and provides technical information used in the decision making process for the development of documents used for TMDE certification.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • This position requires the completion of a pre-employment Physical Examination and an annual examination thereafter to ensure the continued, required level of physical health and ability or fitness to perform the duties of the position.

Qualifications

Who May Apply: US Citizens

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience.

There is no specific length of training or experience required. However, you must be able to demonstrate, through experience shown in your written application materials that you possess the sufficient knowledge, skills, and abilities to successfully perform the work of this position without more than normal supervision.

Minimum Qualifications (Screen Out Element): Ability to do the work of a(n) Precision Measurement Equipment Calibrator without more than normal supervision. Ability to perform precision measurement equipment calibration basic repair of test equipment and related components and use high precision standards, (e.g., multimeters, signal generators, oscilloscopes). I work under normal supervision of a work leader or journey-level employee who observes tasks in progress and upon completion to make sure they are properly performed. - Failure to meet this Screen out Element will result in an ineligible rating.


You will be evaluated on the basis of your level of competency in the following areas:

  • Ability To Do The Work Of The Position Without More Than Normal Supervision Screen Out
  • Ability to Interpret Instructions, Specification, etc. (includes blueprint reading)
  • Ability To Use and Maintain Tools and Equipment
  • Knowledge of Equipment Assembly, Installation, Repair, etc.
  • Technical Practices (theoretical, precise, artistic)
  • Theory and Instruments (Electrical Electronic) Used in Shop and Trade Practices
  • Trouble Shooting
  • Physical Effort: The work may require long periods of standing or sitting along with some walking or bending during the course of extended periods on measurements. Requires frequent lifting, carrying, and handling of items weighing up to 40 pounds with occasional requirements to lift items in excess of 50 pounds.
  • Working Conditions: The work is performed in laboratories and user facilities where technicians are exposed to the hazards of high voltage high pressure, high and low temperatures, chemicals and radiation. Calibrators must comply with all safety regulations applicable to the calibration mission.

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • Two year trial/probationary period may be required.
  • Direct Deposit of Pay is required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a Career Program (CP) 17 position.
  • You may claim military spouse preference.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority. To receive selection priority for this position, you must: (1) meet ICTAP eligibility criteria; (2) be rated well-qualified for the position with a score of 90 or above; and, (3) submit the appropriate documentation to support your ICTAP eligibility. Additional information about the program is on OPM's Career Transition Resources website.
  • When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.gsa.gov/cdnstatic/FTR%20Bulletin%2018_05%20Relocation%20Allowances_0.pdf for more information.
  • If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. If you are minimally qualified, your résumé and supporting documentation will be compared against your responses to the assessment questionnaire to determine your level of experience. If, after reviewing your résumé and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.

Basis for Rating: Qualified candidates will be assigned to one of three quality categories: Best Qualified, Highly Qualified and Qualified. Veteran preference eligibles are listed ahead of non-preference eligibles within each quality category.

  • Best Qualified. Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements for the announced position.
  • Highly Qualified. Candidates in this category possess good skills and experience above the minimum requirements for the announced position.
  • Qualified. Candidates in this category meet the minimum experience requirements for the announced position.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.