Skip to main content
U.S. flag
Back to results

Environmental Engineer

Department of Health and Human Services
Indian Health Service
California Area
This job announcement has closed

Summary

Position is located with the California Area IHS, Office of Environmental Health and Engineering, Division of Sanitation Facilities Construction, Arcata Field Office. The purpose of the position is to provide planning, design, construction and technical assistance to Indian reservations and Rancherias. Position reports to the district engineer.

Overview

Help
Hiring complete
Open & closing dates
12/07/2018 to 12/21/2018
Salary
$61,218 to - $95,388 per year
Pay scale & grade
GS 11 - 12
Location
1 vacancy in the following location:
Arcata, CA
Telework eligible
No
Travel Required
25% or less - You may be expected to travel for this position.
Relocation expenses reimbursed
Yes—You may qualify for reimbursement of relocation expenses in accordance with agency policy.
Appointment type
Permanent
Work schedule
Full-Time
Service
Competitive
Promotion potential
12
Supervisory status
No
Drug test
No
Announcement number
IHS-19-CA-10337484-DE
Control number
514330400

This job is open to

Help

Clarification from the agency

The IHS is required by law to give absolute preference to qualified applicants who meet the Secretary of the Interior's definition of Indian for appointment to vacancies within the IHS in accordance with established IHS policy as outlined in the Indian Health Manual Part 7, Chapter 3. The IHS is an Equal Opportunity Employer.

Duties

Help

Provides planning, design, and construction and technical assistance on sanitation facilities projects to the community, residents, tribal officials, federal, state, and other local/regional officials. Conducts field surveys and engineering investigations. Drafts engineering feasibility reports, technical drawings, technical specifications, and project status reports. Prepares engineering designs for sanitation facilities including wells, water treatment plants, water storage, water distribution systems, sewage collection and sewage treatment. Inspects construction performed by contractors.

Requirements

Help

Conditions of employment

Selectee may be subject to a probationary period
U.S. Citizenship is required
Must pass pre-employment examination.
Selective Service Registration is required for males born after 12/31/1959

Security Clearance: If you are selected for this vacancy, you must undergo a pre-employment fingerprint check and background investigation. Fingerprint results and background investigation documentation must be cleared prior to hire. You will receive instructions on how to obtain and submit fingerprints and background investigation documentation. After you begin your employment, your continued employment is contingent upon the outcome of a complete background investigation as determined by the sensitivity level of your position. The investigation must find that you are suitable for Federal employment in your position. If you are found not suitable, you will be terminated after you begin work. If you make a false statement in any part of your application, you may not be hired; you may be fired after you begin work; or subject to possible criminal charges.

You must meet the requirements of the job by 11:59pm (Eastern Standard Time) of the closing date: 12/21/2018

Qualifications

To qualify for this position, your resume must state sufficient experience and/or education, to perform the duties of the specific position for which you are applying.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; social). You will receive credit for all qualifying experience, including volunteer and part time experience. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

For positions requiring positive education requirements, or if you are using education to meet all or part of the qualification requirements, you MUST submit a copy of your transcripts or an itemized list of college courses which includes equivalent information from the transcript (course title, semester/quarter hours, and grade/degree earned) in your resume.

BASIC REQUIREMENT(S):
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

MINIMUM QUALIFICATIONS:
Your resume must demonstrate at least one (1) year of specialized experience equivalent to at least the next lower grade level in the Federal service obtained in either the private or public sector performing the following type of work and/or tasks:
GS-12: Experience serving in a consultative capacity providing professional and technical advice on programs designed to prevent and eliminate environmental health hazards, specifically regarding the development and evaluation of the overall operation of sanitation facilities.
GS-11: Experience in a wide range of professional environmental engineering concepts, principles, and practices applicable to the full range of engineering duties concerned with the design and layout of domestic waste facilities, pumping stations, sewer systems, and water supply, distribution, and storage facilities. Capable of designing waste and sewage collection, treatment and disposal, water supply, treatment, storage, and distribution systems, OR EDUCATION - 3 years of progressively higher level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree.

Selective Placement Factor for the GS-12 grade level only: Professional Engineer (P.E.) by any State, the District of Columbia, Guam, or Puerto Rico.

You must meet all qualification requirements within 30 days of the closing date of the announcement.

Additional information

THIS POSITION IS BEING RE-ADVERTISED TO SOLICIT ADDITIONAL APPLICATIONS. APPLICANTS WHO APPLIED PREVIOUSLY NEED NOT REAPPLY UNLESS SUBMITTING UPDATED AND/OR MISSING INFORMATION.

This position is being announced concurrently under Merit Promotion/Excepted Service Examining procedures. Please review vacancy announcement number IHS-19-CA-10287215-ESEP/MP for eligibility requirements. NOTE: Applicants must apply separately for each announcement in order to be considered.

Recruitment incentive may be authorized. Service agreement will be required.

This position has promotion potential to the GS-12 grade level. Promotion to the next grade level is at management's discretion and is based on your demonstrated ability to perform the higher level duties, the continuing need for the higher level duties, and "Regulatory/Administrative" approval. Promotion to the next higher grade level is not guaranteed and no promise of promotion is implied.

Drug test may be required.

Valid State Driver's License is required.

~~~IHS - Operated Properties are tobacco free~~~

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

If you meet the minimum qualifications requirements for this position, your application will be evaluated and rated under Category Rating selection procedures. Once the application process is complete, a review of your qualifications will be conducted to determine if you are qualified for this job. Qualified candidates will be assigned to a quality category. The quality categories are: Best Qualified, Well Qualified, or Qualified. Within each of these categories, applicants eligible for veteran's preference will receive selection priority over non-preference eligibles.

Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your category rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position. Please follow all instructions carefully. Errors or omissions may affect your eligibility.

You will be rated based on the information provided in your resume (your resume must state specific duties that relate to this position) and your responses to the assessment questions will be evaluated against the duties you provided in your resume, along with your submitted documentation to determine your ability to demonstrate the following:

    • Engineering and Technology
    • Oral Communication
    • Planning and Evaluating
    • Project Management
    • Technical Competence

The following links below provide information on how you may be eligible for various hiring authorities. If you are a Veteran, qualified CTAP and ICTAP eligible, or an individual with a disability, please refer to the following links below for additional guidance. CTAP and ICTAP candidates will be eligible for selection priority if it is determined that they have exceeded the minimum qualifications for the position by attaining at least a "well qualified" rating of 85 out of 100. Information about CTAP and ICTAP eligibility is on the Office of Personnel Management's Workforce Restructuring Career Transition website at: https://www.opm.gov/policy-data-oversight/workforce-restructuring/employee-guide-to-career-transition/. CTAP/ICTAP documentation requirements are listed in the "Required Documents" section of this announcement.

Veterans , i.e. (VEOA, VRA, and 30% or more disabled) - https://www.opm.gov/policy-data-oversight/veterans-services/vet-guide/
Career Transition Assistance Program (CTAP) - http://www.ihs.gov/jobs/permanentDocs/ctap.doc
Interagency Transition Assistance Program (ICTAP) - https://www.opm.gov/policy-data-oversight/workforce-restructuring/employee-guide-to-career-transition/
Schedule A Appointments for the Disabled - https://www.opm.gov/policy-data-oversight/disability-employment/hiring/

Click here to view vacancy questions: https://apply.usastaffing.gov/ViewQuestionnaire/10337484. All documents above MUST be received by 11:59 pm (Eastern Standard Time) of the closing date of, 12/21/2018, to be considered.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.