Skip to main content
U.S. flag
Back to results

Precision Measurement Equipment Calibrator

Department of the Army
U.S. Army Aviation and Missile Command
USA TMDE SPT Region West, Office of the Director, WSMR, Fort Riley TSC
This job announcement has closed

Summary

About the Position: The incumbent serves as a calibration specialist in the parameters of electrical, electronic, microwave, nucleonic, optical/laser, physical and dimensional measurements applicable to the secondary transfer level calibration, certification and evaluation of test, measurement, and diagnostic equipment (TMDE).

NOTE: Permanent Change of Station (PCS) expenses may be authorized depending on the availability of funds.

Overview

Help
Hiring complete
Open & closing dates
03/12/2018 to 03/19/2018
Salary
$25.80 to - $30.10 per hour
Pay scale & grade
WG 11
Location
1 vacancy in the following location:
Fort Riley, KS
Travel Required
Occasional travel - You may be expected to travel for this position up to 10% of the time.
Relocation expenses reimbursed
Yes—Permanent Change of Station (PCS) expenses may be authorized depending on the availability of funds.
Appointment type
Permanent
Work schedule
Full-Time
Service
Promotion potential
11
Supervisory status
No
Security clearance
Other
Announcement number
SWEM184356179519D
Control number
493422700

Duties

Help
  • Applies electronic principles and practices
  • Prepares test and certification reports
  • Interfaces with users and manufacturers
  • Assists and advises users
  • Develops and implements technical procedures

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • A pre-employment physical is required
  • This position has a heavy lifting requirement of 50+ pounds
  • Shift work may be required
  • Position requires a valid driver's license
  • Work is performed in laboratories and user facilities where technicians are exposed to the hazards of high voltage, high pressure, and high and low temperatures, chemicals and radiation

Qualifications

Who May Apply: US Citizens

In order to qualify, you must meet the experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

There is no specific length of training or experience required. However, you must be able to demonstrate, through experience shown in your written application materials that you possess the sufficient knowledge, skills, and abilities to successfully perform the work of this position without more than normal supervision.

Minimum Qualifications (Screen Out Element): Ability to do the work of a Precision Measurement Equipment Calibrator without more than normal supervision by applying troubleshooting procedures and practices to repair test, measurement, and diagnostic equipment (TMDE), and by using calibration standards and automated workstations to calibrate test instruments such as multi-meters, signal generators, and oscilloscopes under the close supervision of a work leader or journey-level employee who observes tasks in progress and upon completion to make sure they are properly performed.- Failure to meet this Screen Out Element will result in an ineligible rating.

You will be evaluated on the basis of your level of competency in the following areas:

  • Ability To Interpret Instructions, Specification, etc. (includes blueprinting reading)
  • Ability To Use and Maintain Tools and Equipment
  • Knowledge of Equipment Assembly, Installation, Repair, etc.
  • Technical Practices (theoretical, precise, artistic)
  • Theory and Instruments (Electrical Electronic) Used in Shop and Trade Practices
  • Troubleshooting
  • PHYSICAL EFFORTS: The work may require long periods of standing or sitting along with some walking or bending during the course of extended periods on measurements. Requires frequent lifting, carrying, and handling of items weighing up to 40 pounds with occasional requirements to lift items in excess of 50 pounds.?
  • WORKING CONDITIONS: The work is performed in laboratories and user facilities where technicians are exposed to the hazards of high voltage high pressure, high and low temperatures, chemicals and radiation. Calibrators must comply with all safety regulations applicable to the calibration mission.

Education

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • Two year trial/probationary period may be required.
  • Direct Deposit of Pay is required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a Career Program (CP) 17 position.
  • You may claim military spouse preference.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority. To receive selection priority for this position, you must: (1) meet ICTAP eligibility criteria; (2) be rated well-qualified for the position with a score of 90 or above; and, (3) submit the appropriate documentation to support your ICTAP eligibility. Additional information about the program is on OPM's Career Transition Resources website.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. If you are minimally qualified, your résumé and supporting documentation will be compared against your responses to the assessment questionnaire to determine your level of experience. If, after reviewing your résumé and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.

Basis for Rating: Qualified candidates will be assigned to one of three quality categories: Best Qualified, Highly Qualified and Qualified. Veteran preference eligibles are listed ahead of non-preference eligibles within each quality category.

  • Best Qualified. Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements for the announced position.
  • Highly Qualified. Candidates in this category possess good skills and experience above the minimum requirements for the announced position.
  • Qualified. Candidates in this category meet the minimum experience requirements for the announced position.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.