Skip to main content
U.S. flag
Back to results

Sheet Metal Mechanic

Department of the Air Force
Headquarters, Air Force Reserve Command
This job announcement has closed

Summary

This is an Air Reserve Technician Enlisted position

Air Reserve Technicians are part of the regular civil service and enjoy all the benefits granted to Federal employees in the competitive civil service. In addition, ARTs are required to maintain active membership in an Air Force Reserve unit so long as they occupy Air Reserve Technician positions. As members of reserve units, ARTs receive on average one weekend of military training per month. In addition, they are eligible for 15 days active duty tour each year for which military leave is granted with full civilian pay. Air Reserve units and members are subject to immediate call to active duty in mobilization to meet a national emergency.

This is a standing register used to fill position at AFRC locations as vacancies occur. Some positions may have promotion potential to a higher grade than the grade being filled. Multiple vacancies may be filled from this announcement. The beginning and ending salaries may vary depending on location of position.

The first cut-off for this announcement is two (2) weeks from the opening date of this announcement. After the first cut off it will be the 25th of each month thereafter. Therefore, if we receive your application by midnight on the 25th of the month, you are eligible to go on the register the following month.

Some positions covered may or may not be obligated. Therefore, the selectee may be displaced by reassignment or reduction in force procedures at a later time should the previous incumbent exercise his/her reemployment rights.

Retired military are usually ineligible for membership in the Air Force Reserve. Retired military personnel who have active Air Force Reserve assignments may apply provided they show assignment (position and unit) on their application.

The Government's most important asset is its people.

Overview

Help
Hiring complete
Open & closing dates
02/09/2018 to 12/25/2018
Salary
$23.54 to - $27.46 per hour
Pay scale & grade
WG 10
Locations
MANY vacancies in the following locations:
Elmendorf AFB, AK
Gunter AFB, AL
Maxwell AFB, AL
Little Rock AFB, AR
Travel Required
Occasional travel - You may be expected to travel for this position.
Relocation expenses reimbursed
No
Appointment type
Permanent
Work schedule
Full-Time
Service
Job family (Series)
Supervisory status
No
Security clearance
Other
Announcement number
SR-18-SHEET-METAL-MECH-WG10
Control number
491058900

This job is open to

Help

Duties

Help

The primary purpose of this Air Reserve Technician (ART) Enlisted position is to perform aircraft structural maintenance at journey level in the structural section of a component repair or maintenance squadron of an Air Force Reserve unit. This includes tasks associated with planning, laying out, fabricating, modifying, repairing, assembling, and installing sheet metal parts, items, and assemblies and to provide training to reservists in the accomplishment of related tasks. Incumbent of this position will perform the following duties:

  • Plan and lay out work from blueprints, sketches, drawings, specifications, and work orders in the repair, coating or manufacture of aircraft structural components.
  • Develop patterns, cut, form, join, assemble, and install items and systems which have combined straight and curved edges or irregular curves, angles, and planes.
  • Operate and maintain complex hand and power tools and equipment.
  • Prepare surfaces and apply protective coatings to a variety of materials, such as sheet metal, honeycomb, radomes, and composites then correctly dispose of hazardous waste products.
  • Utilize safety practices, Federal Environmental Protection Agency (EPA) and AF Environmental Compliance Assessment Management Program (ECAMP) environmental protection practices and procedures and complies with security regulations, directives and policies.

Requirements

Help

Conditions of employment

  • Must be a United States Citizen
  • Must meet and maintain Air Force Reserve military requirements
  • Incentives/Special Salary Pay Rate may or may not apply
  • Disclosure of Political Appointments
  • Preferred Military AFSC: 2A7X3/2A7X5
  • Permanent Change of Station (PCS) cost may or may not be paid.

Position may or will require incumbent to: (1) Incumbent's regular assignments are primarily ART duties: however, the incumbent may be assigned some non-ART duties, generally not to exceed 30 percent of total responsibilities.(2) May be required to work uncommon tour of duty. (3) Must obtain and maintain the appropriate security clearance. (4) This is a drug testing designated position (TDP). Incumbent will be subject to random testing. (5) Meet and maintain Air Force Reserve requirements. (6) Work encompasses strenuous physical exertion; prolonged standing on production lines; climbing up and down ladders and scoffolds; working in cramped and awkward positions; reaching, lifting, and bending while using hand and powered tools in uncomfortable position for extended periods. (7) Works both inside and outside and subject to moderate amount of noise and vibration. When working outside is subject to a variety of weather conditions. (8) Weight lifted seldom exceeds 50 pounds. (9) Subject to cuts, bruises, falls, and burns. (10) Required to wear safety glasses when performing eye hazardous operations. (11) Some positions under this announcement may be covered by the Domestic Violence Misdemeanor Amendment (30 Sept 96) of the Gun Control Act (Lautenberf Amdnement ) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of such position. Some positions under this announcement may be controlled positions covered by the Personal Reliability Program (PRP). (12) Some positions covered by this announcement may be designated as drug testing positions where the incumbent may be subject to random drug testing.

Qualifications

Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.

Element A - Ability to do the Work of a Sheet Metal Mechanic (Aircraft/Painter) without more than normal supervision:
Element B - Ability to Use Hand Tools, Power Tools, and Metal Working Machines for Sheet Metal Work: Independently select and use or operate, as needed, a complete cross-section of the types of hand and powered machines used.
Element C - Ability to Assemble, Disassemble, Fabricate, and Repair Sheet Metal Systems, Components and Items:
Element K - Ability to Work from Instructions, Specifications, Blueprints, Personal Inspections, etc.:
Element L - Knowledge and Skills for Making Layouts, Patterns, and Templates Using Recognized Trade Methods and Practices:
Element M - Knowledge of Materials: Knowledge of and ability to use materials (metal, non-metallic, coating and chemicals, etc.) used in performing structural/corrosion control work.

Education

Substitution of Education for Experience: None

ARE YOU USING YOUR EDUCATION TO QUALIFY? You MUST provide transcripts to support your educational claims. Education must be accredited by an accrediting institution recognized by the U.S. Department of Education.

FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.

Additional information

Individuals on active duty may apply 120 days before separation date and should indicate in their application their military separation date. Reservists who are mobilized may submit a copy of their mobilization orders or a statement in their application stating they are available within 120 days.

Interagency Career Transition Assistance Program (ICTAP): For information how to apply as an ICTAP eligible click here. To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated in the "Highly Qualified" or "Best Qualified" Category on the rating criteria for this vacancy. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.

Spouses of active duty military members of the Armed Forces may receive preference in hiring under this announcement if they are among the best qualified referred and are within reach of selection. Please clearly identify in your application that you are a military spouse preference applicant.

All Federal Employees are required by PL 104-134 to have federal payments made by Direct Deposit.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Please note if duplicate/multiple application materials are submitted, we will consider the most recent submission as the one of record. If you do not meet the screen out questions, you will not receive any further consideration. Please follow all instructions carefully. Errors or omissions may affect your rating.

You will be rated under Category Rating procedures based on the extent to which your experience meets the job elements for the position and rated as shown below. Additional points are not added for veterans' preference; however, preference is still applied. Applicants eligible for veteran's preference will receive selection priority over non-veterans within the same quality category. Once the application process is complete, a review of your application will be made to ensure you meet the job requirements. To determine if you are qualified for this job, a review of your resume and supporting documentation will be made and compared against your responses to the assessment questionnaire. You will receive a rating based on your responses to the assessment questionnaire. The rating is a measure of the degree to which your background matches the job elements required of this position. If after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, your rating can and will be adjusted to more accurately reflect your abilities.

If you meet the qualification requirements, your application will be placed in one of three categories: Best Qualified- Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements for announced position. Highly Qualified- Candidates in this category possess good skills and experience above the minimum requirements for announced position. Qualified- Candidates in this category meet the minimum experience requirements for announced position.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.