Skip to main content
U.S. flag
Back to results

Electrical Engineer

Department of the Army
U.S. Army Corps of Engineers
This job announcement has closed

Summary

Looking for a great place to work? The U.S. Army Corps of Engineers is one of the best! In 2016, USACE ranked number two of government large-agency subcomponents! As rated by their employees, USACE supervisors strongly support employee development and opportunities to demonstrate leadership skills, while also maintaining an optimal work/life balance. The Corps offers a team-inspiring and collaborative work environment; providing challenging and rewarding careers across a variety of disciplines.

Civilian employees serve a vital role in supporting the Army mission. They provide the skills that are not readily available in the military, but crucial to support military operations. The Army integrates the talents and skills of its military and civilian members to form a Total Army.

About the Position:
This is an Electrical Engineer, GS-0850-12 position with the U.S. Army Corps of Engineers (USACE), Los Angeles District. This position is in the Asset Management Division Operations and Maintenance Branch Engineering Evaluation Section. Los Angeles is a moderate cost of living area close to all of Southern California Beaches, entertainment, and amusement parks. It is in the West region of the United States and enjoys mild winter weather and amazing summers. Los Angeles is close to the Pacific Ocean, and several rivers and major waterways.

Who May Apply: US Citizens

Overview

Help
Reviewing applications
Open & closing dates
02/06/2018 to 03/09/2018
Salary
$83,043 to - $107,955 per year
Pay scale & grade
GS 12
Location
1 vacancy in the following location:
Los Angeles, CA
Travel Required
Occasional travel - You may be expected to travel for this position.
Relocation expenses reimbursed
Yes—You may qualify for reimbursement of relocation expenses in accordance with agency policy.
Appointment type
Permanent
Work schedule
Full-Time
Service
Job family (Series)
Supervisory status
No
Announcement number
WTKC183216581286
Control number
490316000

This job is open to

Help

Duties

Help

  • Serves as a specialist in the electrical engineering field.
  • Conducts investigations for Operations Branch on electrical equipment installations, making recommendations for corrective measures required to ensure satisfactory performance.
  • Visits project sites to render advice, discuss methods and outline instructions as to the requirements for installation, repair, replacement or rehabilitation to meet the intent of the design and performance or the applicable Operations and Maintenance Manual.
  • Advises on appropriate methods and techniques to be used and applicability of procedures.
  • Analyzes and reviews contractors electrical shop drawings and material and equipment lists for conformance with contract plans and specifications.

Requirements

Help

Conditions of employment

  • Incumbent must be able to obtain and maintain a state driver's license.
  • Requires the possession of an active DAWIA Level II certification.
  • Requires you to submit a Confidential Financial Disclosure Report (OGE450).

Other Requirements:

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • Two year trial/probationary period may be required.
  • Appointment is subject to the completion of a favorable suitability or fitness determination.
  • Direct Deposit of Pay is Required.
  • This is a Career Program (CP) 18 position.
  • This position requires you to submit a Confidential Financial Disclosure Report (OGE450) upon entry, and annually thereafter.
  • This position requires incumbent to be able to obtain and maintain a state driver's license for the duration of the emploment.
  • This position requires the possession of an active, Defense Acquisition Workforce Improvement Act (DAWIA) Level II certification, or the ability to obtain one within 24 months from the beginning of employment. I have a DAWIA Level II certification as stated above, or have the ability to obtain one within 24 months from the beginning of employment. (Please attach your DAWIA certification, if applicable). http://icatalog.dau.mil/onlinecatalog/CareerLvl.aspx?lvl=3&cfld=3

Qualifications

In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Requirement for Electrical Engineer:

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

Specialized Experience: One year of specialized experience which includes experience related to the study of layout, and design of Civil Works projects such as dams, dam control house, including offices, warehouses; developing Electrical drawings, plans and specifications, writing technical reports, preparing applicable portions of studies and analysis supporting project design documents, formulating and resolving design issues during construction, and performing or overseeing the technical review of electrical design products developed internally or by A-E firms; and developing electrical design solutions where little guidance or precedent exists. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-11).

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

You will be evaluated on the basis of your level of competency in the following areas:

  • Building and Construction
  • Electrical Engineering
  • Oral Communication
  • Quality Management

Education

Only degrees from an accredited college or university recognized by the Department of Education are acceptable to meet positive education requirements or to substitute education for experience. For additional information, please go to the Office of Personnel Management (OPM) and U.S. Department of Education websites at - http://www.opm.gov/qualifications and http://www.ed.gov/admins/finaid/accred/index.html

Foreign education must be evaluated for U.S. equivalency in order to be considered for this position. Please submit your foreign education evaluation with your application.

Additional information

  • If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • You may claim military spouse preference.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine your eligibility, qualifications, and quality ranking for this position. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

Basis for Rating: Qualified candidates will be assigned to one of three quality categories: Best Qualified, Highly Qualified and Qualified. Veteran preference eligibles are listed ahead of non-preference eligibles within each quality category.

  • Best Qualified. Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements for the announced position.
  • Highly Qualified. Candidates in this category possess good skills and experience above the minimum requirements for the announced position.
  • Qualified. Candidates in this category meet the minimum experience requirements for the announced position.

Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority. To receive selection priority for this position, you must: (1) meet ICTAP eligibility criteria; (2) be rated well-qualified for the position with a score of 90 or above; and, (3) submit the appropriate documentation to support your ICTAP eligibility. Additional information about the program is on OPM's Career Transition Resources website.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.