Skip to main content
U.S. flag
Back to results

ENGINEER/SCIENTIST

Department of the Navy
Naval Sea Systems Command
This job announcement has closed

Summary

You will serve as the PRINICPAL FOR SAFETY in the SYSTEMS ENGINEERING/CAD/PAD DIVISION of NAVSURFWARCEN IH DIV.

This position is part of the Warfare Centers Personnel Demonstration Project. The ND-4 pay band encompasses positions equivalent to GS-12 and GS-13

Overview

Help
Hiring complete
Open & closing dates
07/14/2021 to 07/21/2021
Salary
$72,750 to - $134,798 per year
Pay scale & grade
ND 4
Location
Indian Head, MD
1 vacancy
Telework eligible
Yes—as determined by the agency policy.
Travel Required
Occasional travel - You may be expected to travel for this position.
Relocation expenses reimbursed
Yes—You may qualify for reimbursement of relocation expenses in accordance with agency policy.
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
4
Supervisory status
No
Security clearance
Secret
Drug test
No
Announcement number
ST-11167776-21-RLL
Control number
607347800

Duties

Help
  • You will serve as technical subject matter expert for all Naval Surface Warfare Center-Indian Head system safety programs supporting Naval Sea Systems Command (NAVSEA), Naval Air Systems Command (NAVAIR) and other DoD and Government Sponsors.
  • You will be involved with executing system safety programs for weapons and weapon systems in accordance with DoD 5000 series, MIL-STD-882E and other Navy requirements.
  • You will would provide subject matter expertise to system safety personnel, providing mentoring and advisement to ensure program risks are identified, mitigated to the lowest levels, and accepted prior to introduction to the Fleet/Force.
  • You will provide effective project management, quality control and product improvements on assigned projects.

Requirements

Help

Conditions of employment

  • Must be a US Citizen.
  • Must be determined suitable for federal employment.
  • Must participate in the direct deposit pay program.
  • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
  • Requirements must be met by the closing date of this announcement.
  • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  • Males born after 12-31-59 must be registered for Selective Service.
  • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  • This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). You must be certified as a Career Field Engineering Level 3. Certification is required within 24 months of appointment.
  • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.

Qualifications

Your resume must demonstrate at least year of specialized experience equivalent to the next lower pay band, ND-03 (GS-9-11 equivalent), in the Federal service or equivalent experience in the private or public sector as a Professional engineer or Scientist providing technical oversight and guidance to system safety personnel that support cartridge actuated devices and propellant actuated devices (CAD/PAD) systems safety programs at major program offices.

Additional qualification information can be found from the following Office of Personnel Management website:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series

AND

Professional Engineering Series, 0801, Individual Occupational Requirement: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf

Professional Physical Science Series, 1301, Individual Occupational Requirement: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/1300/general-physical-science-series-1301/



Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess

Successfully completed a bachelor's degree (or higher) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.


Have a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: (I) Professional registration or licensure: Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration; or (II) Written Test: Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; or (III) Specified academic courses: Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above); or (IV) Related curriculum: Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

1301
I have successfully completed a bachelor's degree or higher in physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics.
I have a combination of education and experience with education equivalent to one of the majors shown above that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education.

Additional information

This position is covered by the Department of Defense Priority Placement Program.

A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized.

Recruitment incentives may be authorized to eligible new hires.

This position is eligible for part time, full time or ad-hoc telework at the discretion of management.

Additional vacancies may be filled by this announcement.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center.

Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf

ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/ictap/

Military Spouse Preference applicants will receive priority consideration at the Full Performance Level (FPL) and if determined to be Best Qualified at the FPL, and selected, must be placed at the FPL. A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

When the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcement. You will be rated based on the information provided in your resume and responses to the Occupational Questionnaire, along with your supporting documentation to determine your ability to demonstrate the following competencies:

  • ORAL COMMUNICATION
  • PROBLEM SOLVING
  • PROJECT MANAGEMENT
  • RESEARCH AND DEVELOPMENT
  • SYSTEMS TESTING AND EVALUATION
  • WRITTEN COMMUNICATION


You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.

If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities or you may be found ineligible/not qualified.

Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

All eligibility, qualifications, and time-in-grade requirements must be met by the closing date of this announcement.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.