Clarification from the agency

1. Washington Air National Guard Permanent Indefinite Employees 2. Washington Air National Guard Traditional Guard members and Washington National Guard Active Guard Reserves (AGR) 3. All other current military members willing to become Washington Air National Guard members 4. All other individuals eligible and willing to become military members of the Washington Air National Guard and wear the military uniform.

A WG-5803-10, HEAVY MOBILE EQUIPMENT MECHANIC:

• Repairs, adjust, overhauls, performs major repairs, and maintenance on military and commercial designed heavy mobile equipment and special purpose vehicles. Inspects repairs, overhauls and tests major systems including gasoline, diesel, electric powered hybrid, multi-fuel, turbine, and other types of internal combustion engines, which may be turbo-charged or blower assisted, automatic or manual transmissions, including those with power take offs, cross-drive transmissions, hydraulic, electric, pneumatic systems and controls, fluid pumping systems, turrets, winches and four wheel steering systems. Systematically analyzes malfunctions and the cause of mechanical failure by means of visual and auditory checks, uses computer-controlled test equipment, engine analyzers, compression testers, voltmeters, ohmmeters and pressure gauges in order to determine the exact nature of extent of repairs or adjustments necessary to complete work. Use specialized diagnostic equipment to troubleshoot problems in complex state-of-the-art electric and electronic systems to identify and replace defective components such as computer control modules, sensors, solenoids, digitized components, and circuits. Develop or improvise methods, alter parts, and make repairs in the absence of technical guidelines. Modify parts to fit, or improvises modifications to equipment to correct recurring malfunctions. Makes design modifications to meet special requirements, make adjustment or performs tests. Removes, disassembles overhauls, modifies, adjusts, and repairs, engines, transmissions, or sub-assemblies in accordance with the proper procedures and specifications. Reassembles engines, transmissions, and sub-assemblies, makes adjustments, tests and reinstalls in vehicles and equipment. Determines serviceability by operational driving test.
• Performs body repair and corrosion control, refinishes and repaints surfaces as required. Repairs and/or replaces body parts, locks, glass, etc. and determines if additional repairs are required. Repairs may be accomplished by using welding equipment, power tools, hand tools and other specialized equipment. Cleans, tests, and repairs radiators/oil coolers and associated parts. Test, services, and repairs vehicle air conditioning systems following manufacturers and environmental guidelines. Replaces or repairs tires, tubes and balances wheel assemblies.
• Prepares, maintains and submits applicable maintenance work orders for man-hour and data collection accounting, to include completing forms to reflect work performed or delayed and parts and maintenance required. Assists in establishing and maintaining adequate shop stock, special levels parts, and appropriate shop support equipment and tools. Inspect, maintains, and operates all appropriate shop equipment. Researches and assists in requisitioning materials, parts and equipment necessary to perform the vehicle maintenance/management mission. Assists in review and updating maintenance technical orders, shop operating instructions, commercial publications, MAJCOM and local publications, as well as other pertinent directives. Provides expert support to the Customer Service Center to various unit members.
• Participates as OJT Instructor in the vehicle maintenance area. Conducts instructional classes on methods and procedures of operation and maintenance concerning all aspects of vehicle repairs and assigned shop maintenance support equipment. Evaluates effectiveness of instruction, documents and maintains individual /section training and qualification records.
• Assists in conducting the local occupational safety and health training program, to include compliance with directives and procedures for proper disposal of hazardous waste products within the functional area. Fully comprehends and complies with federal, state and local environmental laws and the requirements in Air Force Occupational, Safety and Health Standard (AFOSHSTD).
• Other duties as assigned.

Conditions of employment

MILITARY REQUIREMENTS:

Military Grades: E1 - E5

Desired Military Assignments: 2T3XX

- Applicants need not be assigned to the position or possess the AFSC to apply or be considered for selection. Selected applicant must be assigned to a compatible Military position and attain AFSC within 1 year of appointment action.

- May be required to successfully complete a trial period.

- Participation in direct deposit is mandatory.

- Males born after 31 December 1959 must be registered for Selective Service.

- Must maintain membership in the WA Air National Guard for continued employment.

- Must be able to obtain and maintain the appropriate security clearance of the position.

- This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.

- Position requires ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.

- May occasionally be required to work other than normal duty hours; overtime may be required.

- The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.

Qualifications

GENERAL EXPERIENCE:
Experience or training that has provided the candidate with the skill to make repairs or the ability to assist with repairs that can be accomplished by removing, adjusting, or replacing defective or worn parts.

SPECIALIZED EXPERIENCE:
Must have at least 18 months experience or training leading to a thorough knowledge of the mechanical makeup, operation, and working relationships of complex systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Ability to diagnose, repair, overhaul, and modify a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Knowledge of electrical, electronic, hydraulic, pneumatic, and other non-mechanical systems that have a functional relationship and effect on the operation of mechanical systems. Knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls. Basic knowledge of electronics, sufficient to identify and replace defective components, such as sensors, diodes, and circuit boards. Ability to repair or overhaul major components such as diesel, multi-fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. You may also be excluded from consideration if you indicate that you are unwilling to accept the lower grade and a determination is made that you are not qualified at the higher grade. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Verbiage displayed on your resume or application must contain your own words. You may refer to position descriptions, as well as the general and specialized experience located within the vacancy announcement, to assist with describing work experiences; however, resumes or applications received in verbatim will not be considered. In your resume you will need to address the general and specialized experience listed above. Please use as much detail as needed, giving dates (months and years) of the experience, position title and how the experience was gained. This information is needed to determine if you are qualified for the position.

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities, and other characteristics). NOTE: You do not have to respond to the KSA's separately but your resume should contain sufficient information to demonstrate possession of the KSA's.

• Skill and Knowledge of diagnosis, repair, overhaul, and modification of heavy mobile equipment, systems, and vehicles.
• Knowledge of the mechanical makeup, operation, and working relationships of heavy duty systems, assemblies, and parts, including such major systems as diesel, multifuel, and gasoline engines, including supercharged and turbocharged engines; automatic and manual transmissions and gear reduction systems, including those with converters, planetary gears, and power take offs; drive line assemblies including differentials, power dividers, and dual speed axles; electrical and electronic systems and accessories, including ignition systems, charging and starting systems, and wiring and lighting systems; carbureted and fuel injection systems; admission control systems.
• Knowledgeable of electrical, electronic, hydraulic, pneumatic, and other non-mechanical systems which have a functional relationship and effect on the operation of mechanical systems.
• Knowledge of hydraulic systems and their controls.
• Basic electronic knowledge sufficient to identify and replace defective components, such as sensors and circuit boards.