Skip to main content
U.S. flag
Back to results
 

Civil Engineer

Department of the Army
U.S. Army Corps of Engineers
Engineering Division

Summary

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service.

About the Position: Perform work in the design of a variety of civil engineering features and systems in support of the District's Military and Civil Works, and Interagency, International, and Environmental Services (IIES) programs coordinating all phases of projects to their completion.

Overview

Help
Accepting applications
Open & closing dates
12/03/2025 to 12/16/2025
Salary
$55,486 to - $116,925 per year
Pay scale & grade
GS 7 - 12
Location
1 vacancy in the following location:
Norfolk, VA
Remote job
No
Telework eligible
Yes—Situational telework only, as determined by the agency policy.
Travel Required
Occasional travel - You may be expected to travel for this position up to 10% of the time
Relocation expenses reimbursed
No
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
12
Job family (Series)
Supervisory status
No
Security clearance
Other
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Financial disclosure
No
Bargaining unit status
Yes
Announcement number
CEDA-26-12844446-DHA-R
Control number
851426200

Videos

Duties

Help
  • Coordinate all phases of projects to their completion including design of projects, conferences, negotiations, design control, consultations, and direction of Architect-Engineers (A-Es) performing design.
  • Design difficult civil engineering features and facilities independently or included in a great variety of larger engineering projects.
  • Participate in pre-design conferences, study design directives, assimilate relative design criteria and regulations, formulate plans and initiate project designs.
  • Prepare correspondence, memoranda and endorsements on technical engineering work, reports, written opinions related to the design and connected activities.
  • Maintain knowledge and skills of the District's 3-D Civil CADD software and hardware technology so that maximum efficiency and production is achieved.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • NATIONAL AGENCY CHECK WITH WRITTEN INQUIRIES (NACI) - Appointment to this position is subject to a background investigation to determine your suitability for Federal employment.
  • DRIVER'S LICENSE - The duties of this position require the incumbent to possess or obtain and maintain a valid state Driver's License in one of the 50 U.S. states or possessions to operate vehicles.
  • PROBATIONARY PERIOD - Appointment to this position is subject to a one year probationary period unless the appointee has previously met the requirements as described in 5 CFR Part 315.

Qualifications

Who May Apply: US Citizens

In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Requirement for Civil Engineer:
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

GS-7:
Specialized Experience: One year of specialized experience which includes: Assisting with design of various civil engineering features and facilities such as siting and location, curvatures, grades, drainage considerations, utility supply and disposal including water, sewer and gas, and other features related to environmental permitting; Assisting with writing technical specifications applicable to design work performed or preparing analyses of design; Utilizing computer-aided design and drafting (CADD) technology.
This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05).

OR
Education: One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position.

OR
Superior Academic Achievement. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. Superior Academic Achievement is based on:(1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR(2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR(3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/).

OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages.


See "Education" section for description of Qualifications for GS-9, GS-11, and GS-12

Education

GS-9:
Specialized Experience: One year of specialized experience which includes; Designing various civil engineering features and facilities such as siting and location, curvatures, grades, drainage considerations, utility supply and disposal including water, sewer and gas, and other features related to environmental permitting; Assisting in preparation of design analyses, estimates and specifications; Writing technical specifications applicable to design work performed; Utilizing computer-aided design and drafting (CADD) technology.
This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07).

OR
Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position.

OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages.

GS-11:
Specialized Experience: One year of specialized experience which includes: Planning, advising, and laying out work in the design and detailing of all phases of assigned projects; Designing various civil engineering features and facilities such as siting and location, curvatures, grades, drainage considerations, utility supply and disposal including water, sewer and gas, and other features related to environmental permitting; Writing technical specifications applicable to design work performed, or prepares complex analyses of design; Utilizing computer-aided design and drafting (CADD) technology.
This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).

OR
Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position.

OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

GS-12:
Specialized Experience: One year of specialized experience which includes: Planning, advising, and coordinating the design and related phases of Military/Civil Works and similar projects to their completion; Designing various civil engineering features and facilities, and providing recommendations or solutions to engineering design issues; Reviewing Architect-Engineers (A-Es) design analyses, specifications, and design arrangements to ensure adequacy of systems, and accuracy and conformance with design criteria and sound engineering principles; Instructing practical applications of engineering theory and principles in complex or unusual problems encountered in the assigned project; Utilizing computer-aided design and drafting (CADD) technology and civil software packages.
This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job at GS-12 grade level, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.


FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • One year trial/probationary period may be required.
  • Direct Deposit of Pay is required.
  • This position requires you to submit a Public Financial Disclosure Report (OGE 278) or a Confidential Financial Disclosure Report (OGE450) upon entry, and annually thereafter.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a(n) Engineers and Scientists Career Field position.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • Permanent Change of Station (PCS) may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.
  • Recruitment Incentives may be authorized.
  • Relocation Incentive may be authorized.
  • This is a developmental position to the GS-12. You may be selected at the GS-07, GS-09, GS-11 or GS-12 level. Promotion to the full performance level is not guaranteed. You may be eligible for non-competitive promotion to the target position upon meeting time-in-grade restrictions and the following requirements:(1) Incumbent demonstrates ability to perform at target grade level;(2) Higher level work exists at target grade level;(3) Increased responsibilities are assigned;(4) Supervisor recommends promotion;(5) Incumbent completes all required training and conditions of employment, and;(6) Incumbent completes all regulatory requirements for career ladder promotions.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.

Veterans and Military Spouses will be considered along with all other candidates.

Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.