Skip to main content
U.S. flag
Back to results

Interdisciplinary

Department of the Army
U.S. Army Corps of Engineers
US ARMY ENGINEER DISTRICT, JAPAN ENGINEERING DIVISION
This job announcement has closed

Summary

About the Position:
Technical Lead oversees designs, plans and specifications, and cost estimates for a variety of projects.

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for DoD Government-wide Direct Hire Authority to recruit and appoint qualified candidates to positions in the competitive service.

Overview

Help
Job canceled
Open & closing dates
11/06/2025 to 11/06/2025
Salary
$90,025 to - $117,034 per year
Pay scale & grade
GS 13
Locations
2 vacancies in the following locations:
Camp Foster, Japan
Zama, Camp Zama, Japan
Remote job
No
Telework eligible
Yes—Situational/Unscheduled Telework Only
Travel Required
Occasional travel - You may be expected to travel up to 10% for this position.
Relocation expenses reimbursed
Yes—Payment of Permanent Change of Station (PCS) costs is authorized, subject to the provisions of the Joint Travel Regulations.
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
None
Supervisory status
No
Security clearance
Not Required
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Financial disclosure
Yes
Bargaining unit status
No
Announcement number
CEDD-26-12829290-DHA
Control number
849541900

Videos

Duties

Help
  • Oversees the preparation of plans, specifications and modifications of complex projects or programs.
  • Represents the organization with authority on technical engineering matters within the engineering arena and others as applicable.
  • Serves as the senior staff level technical engineer with responsibility for reviewing, coordinating, monitoring and providing interface with staff counterparts in developing and reviewing all JED designs (not limited to Host Nation or MILCON).
  • Confers with architects and engineers in other organizational units engaged in various aspects of design and construction to resolve conflicts or delays to the timely completion of work.
  • Responsible for quality assurance of engineering features of various planning, design and construction documents.
  • Initiates, contacts, and presents courses of action and/or technical expert advice to other engineers and managers, higher authority, contractors, and operational personnel.

Requirements

Help

Conditions of employment

  • One year trial/probationary period may be required.
  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • This position requires you to submit a Confidential Financial Disclosure Report (OGE450) upon entry, and annually thereafter.
  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • Applicants must comply with the Exceptional Family Member Program requirements as outlined in the DoD Instruction 1315.19.
  • Applicants must comply with the Exceptional Family Member Program requirements as outlined in the DoD Instruction 1315.19 at http://tp://www.dtic.mil/whs/directives/corres/pdf/131519p.pdf.
  • Must be able to satisfy the requirements of the 26JUL12 DODI 1400.25 V1230, DoD Civilian Personnel Management System: Employment in Foreign Areas and Employee Return Rights. Visit https://www.esd.whs.mil/DD/DoD-Issuances/140025/.

Qualifications

Who May Apply: All U.S. Citizens.

In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Requirement for Architect:
A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture.

Basic Requirement for Engineer:
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET);OR(2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

Specialized Experience: One year of specialized experience equivalent to the GS-12 grade level in the Federal service, which includes overseeing complex engineering design and construction projects, coordinating with multiple stakeholders, and conducting field inspections to ensure quality and compliance with technical standards. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12).

Separated Military Members: Resumes will be accepted from members of the Armed Forces who indicate in their applications that they are available for appointment within 120 days of the closing date of this announcement. Military members may be appointed while on terminal/transitional leave, before the effective date of their military retirement/separation.

Military Retirees: Within the DoD (Department of Defense), including non-appropriated fund positions, the appointment of retired military members within 180 days immediately following the retirement date to a civilian position is subject to the provisions of 5 United States Code 3326 or 5 U.S.C. 5305.

If you are currently stationed in the overseas area, all of your overseas time will be credited toward your current overseas tour end date. Your overseas time served will not reset upon accepting this assignment.

If you have returned from OCONUS within the past 2 years or less, your time previously served in the OCONUS area will be credited to your 5 year overseas rotation upon accepting this assignment.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Additional information

  • Direct deposit of pay is required.
  • U.S. citizens overseas under ordinarily resident status are not eligible for appointment under the Status of Forces Agreement.
  • Locality pay does not apply in the overseas area.
  • If an employee brings a child to an overseas location and that child is entitled to attend a DoD school on a space-required basis in accordance with DoDEA Regulation 1342.13, the DoDEA and the Military Department responsible for providing related services will ensure that the child, if eligible for special education, receives a free appropriate public education, including related services pursuant to DoDI 1342.12 and DoDM 1342.12.
  • If an employee brings an infant or toddler (up to 3 years of age) to an overseas location, and that infant or toddler, but for the child's age, is entitled to attend the DoDEA on a space-required basis in accordance with DoDEA Regulation 1342.13, then the Military Department responsible for EIS will provide the infant or toddler with the required EIS in accordance with the eligibility criteria consistent with DoDI 1342.12 and DoDM 1342.12.
  • Employees (and family members) who require medical or dental care in the overseas location will be responsible for obtaining and paying for such care. Access for civilian employees and their families to military medical and dental treatment facilities is on a space-available and reimbursable basis only.
  • Pay retention may be offered to selected applicants for positions at overseas locations. Pay retention will not be offered as an incentive for employees moving between overseas positions.
  • Selectees may receive certain foreign area benefits such as: Living Quarters Allowance (LQA) or government quarters, home leave, etc. Selectees will have their eligibility for foreign area benefits determined at the time of hire in accordance with Department of State Standardized Regulation (DSSR) and DoDI 1400.25 volume 1250.
  • For positions in a foreign country, that country's laws or international agreements may have a direct impact on the ability of an employee's same sex domestic partner or spouse to accompany the employee and receive certain benefits. If you believe you may be affected by these laws and agreements, you should familiarize yourself with relevant information and direct questions concerning a specific country (Foreign Duty Location) to the appropriate Army Human Resources point of contact prior to the acceptance of employment and your entrance on duty.
  • This is a Career Field 16 Engineers and Scientists position
  • The initial length of this overseas tour is 36 months.
  • Defense National Relocation Program may be authorized.
  • Multiple positions may be filled from this announcement.
  • When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction/ for more information.
  • Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.
  • Student Loan Repayment may be authorized.
  • Advanced Leave Accrual may be authorized.
  • Recruitment, relocation, or retention incentives may be authorized for eligible candidates.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.

Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.

If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.